Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: cant burn dvd

  1. #1

    Default cant burn dvd

    hello
    i have opensuse 11.4 on a laptop.
    im trying to burn image file to dvd but i get error messages both on brasero and k3b.
    i have already searched for posts with this issue but couldnt solve it.
    system info :
    opensuse 11.4 gnome fully patched and updated on thinkpad t43p laptop.

  2. #2
    Join Date
    Aug 2008
    Location
    Seattle, WA
    Posts
    1,376

    Default Re: cant burn dvd

    So what's the error message?

  3. #3

    Default Re: cant burn dvd

    on k3b i get an error : opc failed. probably the writer does not like the medium.
    debugging info :
    Devices
    -----------------------
    MATSHITA DVD-RAM UJ-822S 1.61 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW) [DVD-ROM, DVD-R Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, Restricted Overwrite] [%7]

    System
    -----------------------
    K3b Version: 2.0.2
    KDE Version: 4.6.00 (4.6.0) "release 6"
    QT Version: 4.7.1
    Kernel: 2.6.37.6-0.5-default

    Used versions
    -----------------------
    cdrecord: 1.1.10

    cdrecord
    -----------------------
    /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.10
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 1 = CD-ROM
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'MATSHITA'
    Identification : 'DVD-RAM UJ-822S '
    Revision : '1.61'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0011 (DVD-R sequential recording)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0011 (DVD-R sequential recording) (current)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
    Driver flags : SWABAUDIO BURNFREE
    Supported modes: PACKET SAO
    Drive buf size : 1605632 = 1568 KB
    FIFO size : 4194304 = 4096 KB
    Speed set to 2770 KB/s
    Track 01: data 4331 MB
    Total size: 4973 MB (492:46.29) = 2217472 sectors
    Lout start: 4974 MB (492:48/22) = 2217472 sectors
    Current Secsize: 2048
    HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
    Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 81024
    Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
    1 seconds.
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Errno: 5 (Input/output error), send opc scsi sendcmd: no error
    CDB: 54 01 00 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 19 25 73 03 00 00
    Sense Key: 0x3 Medium Error, Segment 0
    Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 9.954s timeout 200s
    /usr/bin/wodim: OPC failed.
    Writing time: 9.983s
    /usr/bin/wodim: fifo had 64 puts and 0 gets.
    /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

    cdrecord command:
    -----------------------
    /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=2217472s -
    brasero says : unknown error.
    i saved the log, do you want me to post it as well ?

  4. #4
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: cant burn dvd

    Has this drive worked recently? A search shows that this model is about 4 years old. Optical drives do die after a life of use.

  5. #5

    Default Re: cant burn dvd

    its older then that
    it works just fine i used it 3 days ago to burn the opensuse live cd image.
    it also works under a win live dvd,i checked it before posting.

  6. #6
    Join Date
    Aug 2008
    Location
    Seattle, WA
    Posts
    1,376

    Default Re: cant burn dvd

    Quote Originally Posted by bababar View Post
    on k3b i get an error : opc failed. probably the writer does not like the medium.
    Have you tried more than one disk? It looks like the medium is bad.

    its older then that
    it works just fine i used it 3 days ago to burn the opensuse live cd image.
    it also works under a win live dvd,i checked it before posting.
    You burned a disk under the live DVD, or you were able to read and boot from it?

  7. #7

    Default Re: cant burn dvd

    i tried more then one media,
    i was able to boot a live dvd, and burn a dvd using a bootable usb flash drive with opensuse live cd on it.

  8. #8

    Default Re: cant burn dvd

    i have to turn in (its late over here),im adding the brasero session log ,hope someone can make sense out of it,thanx for the replys will check the thread in the morning.
    the brasero session log -
    Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_set_output_size_for_current_track
    BraseroBurnURI stopping
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_session_output_size
    BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_PWPBWV.bin toc = none
    BraseroBurnURI called brasero_job_get_session_output_size
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_current_track
    BraseroBurnURI no burn:// URI found
    BraseroBurnURI stopping
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_set_output_size_for_current_track
    BraseroLocalTrack stopping
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_session_output_size
    BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_W7PBWV.bin toc = none
    BraseroLocalTrack called brasero_job_get_session_output_size
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_current_track
    BraseroLocalTrack no remote URIs
    BraseroLocalTrack stopping
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_flags
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_fd_in
    BraseroChecksumImage called brasero_job_set_output_size_for_current_track
    BraseroChecksumImage stopping
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_flags
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_session_output_size
    BraseroChecksumImage output set (IMAGE) image = /tmp/brasero_tmp_43QBWV.bin toc = none
    BraseroChecksumImage called brasero_job_get_session_output_size
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_action
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage called brasero_job_get_input_type
    BraseroChecksumImage called brasero_job_set_current_action
    BraseroChecksumImage called brasero_job_get_fd_in
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage Starting checksuming file /home/xanadu/Downloads/openSUSE-11.4-DVD-i586.iso (size = 4541382656)
    BraseroChecksumImage called brasero_job_get_fd_out
    BraseroChecksumImage called brasero_job_get_current_track
    BraseroChecksumImage Setting new checksum (type = 2) 5f6d6d67c3e256b2513311f4ed650515 ((null) before)
    BraseroChecksumImage Finished track successfully
    BraseroChecksumImage stopping
    BraseroGrowisofs called brasero_job_get_action
    BraseroGrowisofs getting varg
    BraseroGrowisofs called brasero_job_get_action
    BraseroGrowisofs called brasero_job_get_current_track
    BraseroGrowisofs got varg:
    BraseroGrowisofs deactivating
    BraseroGrowisofs called brasero_job_get_action
    BraseroGrowisofs getting varg
    BraseroGrowisofs called brasero_job_get_action
    BraseroGrowisofs called brasero_job_get_flags
    BraseroGrowisofs called brasero_job_get_speed
    BraseroGrowisofs called brasero_job_get_device
    BraseroGrowisofs called brasero_job_get_action
    BraseroGrowisofs called brasero_job_get_session_output_size
    BraseroGrowisofs called brasero_job_get_current_track
    BraseroGrowisofs called brasero_job_get_fd_in
    BraseroGrowisofs called brasero_job_set_current_action
    BraseroGrowisofs got varg:
    growisofs
    -use-the-force-luke=notray
    -use-the-force-luke=4gms
    -dvd-compat
    -speed=2
    -use-the-force-luke=tracksize:2217472
    -use-the-force-luke=tty
    -Z
    /dev/sr0=/home/xanadu/Downloads/openSUSE-11.4-DVD-i586.iso
    BraseroGrowisofs Launching command
    BraseroGrowisofs called brasero_job_get_fd_out
    BraseroGrowisofs called brasero_job_get_fd_in
    BraseroGrowisofs called brasero_job_get_fd_out
    BraseroGrowisofs stdout: Executing 'builtin_dd if=/home/xanadu/Downloads/openSUSE-11.4-DVD-i586.iso of=/dev/sr0 obs=32k seek=0'
    BraseroGrowisofs called brasero_job_set_dangerous
    BraseroGrowisofs stderr: :-[ PERFORM OPC failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
    BraseroGrowisofs stdout: HUP
    BraseroGrowisofs stderr: HUP
    BraseroGrowisofs process finished with status 133
    BraseroGrowisofs called brasero_job_error
    BraseroGrowisofs finished with an error
    BraseroGrowisofs asked to stop because of an error
    error = 0
    message = "no message"
    BraseroGrowisofs stopping
    Session error : unknown (brasero_burn_record brasero-burn.c:2865)

  9. #9
    Join Date
    Jan 2009
    Location
    Switzerland
    Posts
    1,529

    Default Re: cant burn dvd

    i have already searched for posts with this issue but couldnt solve it.
    Try to burn from the command line. Look here:
    Strange file in the root directory - Page 2
    Technology is 'stuff that doesn't work yet.' -- Bran Ferren

  10. #10
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: cant burn dvd

    On 2011-06-04 23:36, bababar wrote:
    >
    > on k3b i get an error : opc failed. probably the writer does not like
    > the medium.


    All linux GUI burning aps use one of two CLI tools: wodim|cdrecord, or
    growisofs. Your k3b is using the former; you can try instead growisofs, as CLI.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.4 x86_64 "Celadon" at Telcontar)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •