Results 1 to 2 of 2

Thread: Linphone with voipbuster, anyone got it working?

  1. #1
    Join Date
    May 2011
    Location
    EU
    Posts
    32

    Default Linphone with voipbuster, anyone got it working?

    I have set up my voipbuster account in linphone, linphone shows it's connected but when making a call it stays forever trying to call and no sound at all.
    any thoughts?

  2. #2
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    11,310
    Blog Entries
    2

    Default Re: Linphone with voipbuster, anyone got it working?

    Typically,
    the symptoms you describe are caused by the VoIP protocol blocked or not supported.

    A quick check looks like Linphone is still implementing SIP.

    You should know that SIP is a special, difficult protocol with special requirements.

    - You cannot be behind a NAT device unless a SIP Proxy is deployed on the NAT device (or an alternative path is allowed for the SIP protocol)
    - You must open all required ports for SIP. SIP itself is only an underlying layer providing Location, Directory and Authentication services. Piggybacking on the SIP layer is a multimedia layer that provides voice and possibly video.

    If your situation satisfies the above requirements, then we can discuss further...

    Tony

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •