I have a tablet pc (which name is Ekoore Drake, italian company), that has an intel N450 processor, which has integrated graphics, and an accelerometer.

They sell it with ubuntu 10.04/10.10 as operation system and everything works fine.
As though, it's been a while that i'm using openSUSE as operating system i have try to format it and install openSUSE. The truth is that i like KDE and suse was much stable and faster than ubuntu on that tablet but the problem is that i haven't been able to have the accelerometer working.

With openSUSE 11.4 and kernel 2.6.38 it recognizes it as rotating the tablet the screen becomes black, if else i think that it should do nothing because ubuntu with kernel version 2.6.32 did nothing when rotating it.
The company that sells it, to make the accelerometer work under ubuntu, provides two files named touchroate and orient that has to be inserted in the /usr/bin and /usr/sbin directories respectively. After that, must edit the rc.local by inserting the following command before the "exit 0"
Code:
echo disable > /sys/firmware/acpi/interrupts/gpe11
and then to edit the sudoers file so it starts on boot.

here is the lsusb
Code:
Bus 005 Device 002: ID 062a:7100 Creative Labs 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 04f3:02f4 Elan Microelectronics Corp. 
Bus 001 Device 004: ID 0c45:62c2 Microdia 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
and the lspci
Code:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
02:00.0 Network controller [0280]: RaLink RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 03)
I haven't found the accelerometer in these two commands and the only information i have but i think its' irrelevant is that the monitor is an MosArt. At the end you can download the two files (touchrotate, orient) provided from the company in case you could find more usefull information (it's in hotfile directlink):

orient: http://hotfile.com/dl/116970166/ffa5983/orient.html
touchrotate: http://hotfile.com/dl/116970183/9ff8...uchrotate.html

Any information about how to make it work in order to not get black screen while rotation would be much appreciated. Even if someone could give me any direction on how it should work.

thank you in advance