Results 1 to 5 of 5

Thread: gps detected not correctely

  1. #1
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    453

    Default gps detected not correctely

    hi

    with opensuse 11.4, my gps qstartz 1000z seem detected like a storage mass

    Code:
    [77173.550064] usb 1-6: reset high speed USB device using ehci_hcd and address 3
    [77173.667170] scsi7 : usb-storage 1-6:1.0
    [77174.675625] scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9412 PQ: 0 ANSI: 0
    [77174.676006] sd 7:0:0:0: Attached scsi generic sg2 type 0
    [77174.678375] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    with opensuse 11.3 it was detected like: /dev/ttyACM0

    so i can't use any problem

    any idea?

  2. #2
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: gps detected not correctely

    On 2011-04-21 00:36, collinm wrote:

    > [77174.678375] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    >
    > --------------------


    Try to mount it and see if it is true.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  3. #3
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    453

    Default Re: gps detected not correctely

    can't mount sdb

  4. #4
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,695
    Blog Entries
    1

    Default Re: gps detected not correctely

    Is the cdc_acm module loaded? (I suspect not if /dev/ACM0 is not present).

    Code:
    lsmod |grep cdc
    If not try loading it manually, then insert your gps device

    Code:
    modprobe cdc_acm
    What does dmesg reveal now?

    Code:
    dmesg|tail
    Code:
    ls -l /dev/ACM0
    If this works, then you can use YaST>>System>>/etc/sysconfig Editor to load the module automatically at boot. (Navigate to System>>Kernel>MODULES_LOADED_ON_BOOT and add the required module there).

  5. #5
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: gps detected not correctely

    On 2011-04-21 23:36, collinm wrote:
    >
    > can't mount sdb


    Please post trial on a terminal with the error you get, between code tags.
    Try also fdisk -l /dev/sdb.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •