Results 1 to 4 of 4

Thread: Yast fails to save network configurations

  1. #1

    Default Yast fails to save network configurations

    I've spent two days trying to get this to work to no avail.

    here is the output of a recommended diagnosis script to start.

    http://nopaste.info/a9441e9a60.html

    short version is ...
    !!! CND0120E: Network card ra0 has no IP address
    !!! CND0490E: No access point with your SSID detected on interface ra0
    !!! CND0330E: WLAN credential problems exist on interface ra0
    !!! CND0310W: Classic network configuration with ifup was detected. Configuration with knetworkmanager is much easier
    !!! CND0360E: Wireless connection tested with an existing wired connection on interface eth0. Unplug the cable and execute the script again

    before we get going, knetworkmanager fails to save changes i make to the device ra0.


    thanks for your help in advance.

  2. #2
    Join Date
    Mar 2010
    Location
    Austin - Texas
    Posts
    10,140
    Blog Entries
    48

    Smile Re: Yast fails to save network configurations

    !!! CND0310W: Classic network configuration with ifup was detected. Configuration with knetworkmanager is much easier
    As long as you get the above response, the NetworkManager is not enabled. You need to go to:

    YaST / Network Devices / Network Settings / Global Options Tab and select "User Controlled with NetworkManager".

    And see if that helps. If you are trying to use Wireless you also need to load the KWallet with NetworkManager to keep your Wireless Password as well.

    Thank You,
    My Blog: https://forums.opensuse.org/blogs/jdmcdaniel3/

    Software efficiency halves every 18 months, thus compensating for Moore's Law

    Its James again from Austin, Texas

  3. #3

    Default Re: Yast fails to save network configurations

    ok, so an update. I reinstalled with Gnome. Yast still wont save using the traditional method (ifup) but.... network manager for gnome (nm-applet) does work. YAY.! still a curious bug or two to work out on this setup. I would call this partially fixed.

  4. #4

    Default Re: Yast fails to save network configurations


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •