Results 1 to 6 of 6

Thread: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

  1. #1

    Default 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

    hello.

    I've configured 802.1Q vlan by creating ifcfg-vlan56 and ifcfg-eth0.10 and got two new
    interfaces vlan56 & eth0.10.
    Nethwork is not work in vlans (VID56 & VID10). After /etc/init.d/network stop (or restart) my console hangs... Also hangs ifconfig command from other console. I've got network configuration files from my old 11.3 (i've installed 11.4 on my PC with disks format). I do this whith a same hardware. Now i'm back to 11.3. Vlans work fine. My hw is: GIGABYTE 890GPA-UD3H (RTL8111/8168B).

    The message about e100e and vlans is like my problem.

    my ifcfg-vlan56 file:
    ETHERDEVICE='eth0'
    IPADDR='1.1.1.100/25'
    NETMASK='255.255.255.128'
    NETWORK='1.1.1.0'
    BROADCAST='1.1.1.127'
    STARTMODE='auto'
    PREFIXLEN='25'

    Do you know about this bug? ... about a fix?

    Nick.

  2. #2
    Join Date
    Sep 2010
    Location
    Poland
    Posts
    1,970

    Default Re: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

    Have You disabled NetworkManager ?

    Best regards,
    Greg
    Best regards,
    Greg

  3. #3

    Default Re: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

    Yes, I don't use NetworkManager.

  4. #4

    Default Re: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)


  5. #5

    Default Re: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

    I've tested it with 11.4 i586 (as like x86_64). Without result.

    What did I do:

    I've got a new computer AMD3 AMD Phenom II (6 cores, 1055T), GIGABYTE 890GPA-UD3H, 4Gb DDR3,
    create one file ifcfg-vlan56 after standart KDE installation by DVD disc of OpenSUSE 11.4,
    configured an eth0 --- any IP/mask. This is my ifcfg-vlan56 file:

    ETHERDEVICE='eth0'
    BOOTPROTO='dhcp'
    BROADCAST=''
    ETHTOOL_OPTIONS=''
    IPADDR=''
    MTU=''
    NAME=''
    NETMASK=''
    NETWORK=''
    REMOTE_IPADDR=''
    STARTMODE='auto'
    USERCONTROL='no'

    I've got two interfaces: eth0 & vlan56 (do not get an IP from DHCP-server !!! Dhcpcd is worked.).
    Then i can see: Terminal hangs while /etc/init.d/network stop (or restart).
    Also I can't to kill a dhcpcd by 'killall -9 dhcpcd' command. Reboot don't work too (hangs on stoping vlan interface).

    The same work fine with 11.3.

    With hope to fix.
    Nick.

  6. #6
    Join Date
    Sep 2010
    Location
    Poland
    Posts
    1,970

    Default Re: 802.1Q vlans problem (OpenSUSE 11.4 x86-64)

    This looks very strange and might be a bug of 11.4. Could You fill in a bug report on this ?

    Best regards,
    Greg
    Best regards,
    Greg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •