Results 1 to 3 of 3

Thread: OpenSuSE 11.4: VLAN vs e1000e - system hangs

  1. #1
    Join Date
    Mar 2011
    Posts
    1

    Default OpenSuSE 11.4: VLAN vs e1000e - system hangs

    The module e1000e is loaded into system. At addition VLAN the system hangs at a stop VLAN or configure other devices (sound, video).

    What's the problem?
    In OpenSuSe 11.3 it worked correctly.

    MB: ASUS P5Q-ME DO / NetCard: Intel 82567LM-3

  2. #2

    Default Re: OpenSuSE 11.4: VLAN vs e1000e - system hangs

    Hello,

    I can confirm this issue - even worse, Yast hangs when trying to access the "Network Settings". Same for VirtualBox when bridged to
    the Vlan interface on the e1000. The only way to get back to a working system is to remove the /etc/sysconfig/network/ifcfg* files for
    the vlan interfaces.

    # lspci | grep Ether
    00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)

  3. #3

    Default Re: OpenSuSE 11.4: VLAN vs e1000e - system hangs

    hwinfo also hangs when e1000 + VLAN are in use. here's my hwinfo after removing the VLAN:

    19: PCI 19.0: 0200 Ethernet controller
    [Created at pci.318]
    Unique ID: rBUF.Cc0FRGO4Uo1
    SysFS ID: /devices/pci0000:00/0000:00:19.0
    SysFS BusID: 0000:00:19.0
    Hardware Class: network
    Model: "Intel 82567LM-3 Gigabit Network Connection"
    Vendor: pci 0x8086 "Intel Corporation"
    Device: pci 0x10de "82567LM-3 Gigabit Network Connection"
    SubVendor: pci 0x17aa "Lenovo"
    SubDevice: pci 0x3047
    Revision: 0x02
    Driver: "e1000e"
    Driver Modules: "e1000e"
    Device File: eth0
    Memory Range: 0xfc500000-0xfc51ffff (rw,non-prefetchable)
    Memory Range: 0xfc527000-0xfc527fff (rw,non-prefetchable)
    I/O Ports: 0x1820-0x183f (rw)
    IRQ: 44 (11624 events)
    HW Address: 00:21:86:f6:2b:a6
    Link detected: yes
    Module Alias: "pci:v00008086d000010DEsv000017AAsd00003047bc02sc00i00"
    Driver Info #0:
    Driver Status: e1000e is active
    Driver Activation Cmd: "modprobe e1000e"
    Config Status: cfg=no, avail=yes, need=no, active=unknown

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •