Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Using Gnome-Shell leads to CLI login

  1. #1
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Using Gnome-Shell leads to CLI login

    Hello all, I have some experience with Linux, but none with openSUSE, you'll be glad to hear
    I installed 11.3 last week and eventually got nvidia drivers working. I was quite happy how most things were progressing, then the temptation to upgrade to 11.4 got too much
    I upgraded today (online, not dvd) and everything went well. On rebooting the desktop came up as normal and all was good.
    I installed nvidia and got that working ok.
    I then installed Gnome-Shell and couldn't figure out how to get it working. I've been using Fedora recently and the Gnome-Shell option is available at Login.
    I then discovered the gnome-shell --replace terminal command and I tried it.
    It seemed to load ok, but as I had used the terminal, when I closed the terminal it seems like compiz crashed. I lost all windows borders and nothing was usable. I REISUB'd and started again. On reboot I got a CLI login prompt.
    After logging in I tried startx, to no avail. I then tried gdm start and got to the desktop again (not gnome-shell). I Alt+F2'd and ran gnome-shell --replace again and all was good - except no network
    I rebooted again, and got the CLI again. Went through it all again and tried to configure network (wireless) no good. I then connected an ethernet cable and tried again. That worked, but I'm not sure why - I didn't think anything was downloaded. Anyway wireless now works ok - even on reboot. However I'm still getting dumped to the CLI login on restarts.
    Can somebody explain why please? I realise I must have missed something, but I don't know what
    Many thanks.

  2. #2

    Default Re: Using Gnome-Shell leads to CLI login

    Rule of thumb is check last messages before login prompt
    Check /var/log/Xorg.0.log for "EE" error messages.
    Check /var/log/messages for errors, tail -n 100 /var/log/messages.
    Pls use http://suse.paste to paste output from your results.

    It could be an X error.
    I think after you installed Gnome-shell it defaults to the Gnome Shell. I had troubles with Compiz freezing that required reboots, or pkill -9 gnome-panel.

  3. #3
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Re: Using Gnome-Shell leads to CLI login

    Server not found!
    I'll abreviate the output and use code tags, if that's ok.

    Output from Xorg.0.log is too long to post in code tags. oops.
    Code:
    mdsuse@linux-n3ld:~> sudo tail -n 100 /var/log/messages
    root's password:
    Mar 14 22:49:08 linux-n3ld ifdown:     wlan0     device: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
    Mar 14 22:49:08 linux-n3ld dhcpcd[8600]: wlan0: sending signal 15 to pid 5414
    Mar 14 22:49:08 linux-n3ld dhcpcd[8600]: wlan0: exiting
    Mar 14 22:49:08 linux-n3ld dhcpcd[5414]: wlan0: received SIGTERM, stopping
    Mar 14 22:49:08 linux-n3ld dhclient: Bound to *:546
    Mar 14 22:49:08 linux-n3ld dhcpcd-hook: ls: cannot access /var/run/netconfig//wlan0/: No such file or directory
    Mar 14 22:49:08 linux-n3ld dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
    Mar 14 22:49:08 linux-n3ld dns-resolver: You can find my version in /etc/resolv.conf.netconfig
    Mar 14 22:49:08 linux-n3ld dhcpcd-hook: ATTENTION: You have modified /etc/resolv.conf.  Leaving it untouched...
    Mar 14 22:49:08 linux-n3ld dhcpcd-hook: You can find my version in /etc/resolv.conf.netconfig ...
    Mar 14 22:49:08 linux-n3ld dhcpcd[5414]: wlan0: exiting
    Mar 14 22:49:11 linux-n3ld network: Starting the NetworkManager
    Mar 14 22:49:11 linux-n3ld modem-manager: ModemManager (version 0.4) starting...
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin ZTE
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin MotoC
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Generic
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin AnyData
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Gobi
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Ericsson MBM
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Longcheer
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Nokia
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Huawei
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Sierra
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Novatel
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Option High-Speed
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin Option
    Mar 14 22:49:11 linux-n3ld modem-manager: Loaded plugin SimTech
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS0): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS1): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS2): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS3): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS4): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS5): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS6): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld modem-manager: (tty/ttyS7): port's parent platform driver is not whitelisted
    Mar 14 22:49:11 linux-n3ld kernel: [  918.401624] sky2 0000:02:00.0: eth0: enabling interface
    Mar 14 22:49:11 linux-n3ld kernel: [  918.401901] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Mar 14 22:49:11 linux-n3ld dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
    Mar 14 22:49:11 linux-n3ld dns-resolver: You can find my version in /etc/resolv.conf.netconfig
    Mar 14 22:49:11 linux-n3ld kernel: [  918.663235] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Mar 14 22:49:12 linux-n3ld kernel: [  920.152937] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
    Mar 14 22:49:12 linux-n3ld kernel: [  920.153198] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Mar 14 22:49:12 linux-n3ld dhclient: Internet Systems Consortium DHCP Client 4.2.0-P2
    Mar 14 22:49:12 linux-n3ld dhclient: Copyright 2004-2010 Internet Systems Consortium.
    Mar 14 22:49:12 linux-n3ld dhclient: All rights reserved.
    Mar 14 22:49:12 linux-n3ld dhclient: For info, please visit https://www.isc.org/software/dhcp/
    Mar 14 22:49:12 linux-n3ld dhclient: 
    Mar 14 22:49:12 linux-n3ld dhclient: Listening on LPF/eth0/00:1a:80:21:b1:18
    Mar 14 22:49:12 linux-n3ld dhclient: Sending on   LPF/eth0/00:1a:80:21:b1:18
    Mar 14 22:49:12 linux-n3ld dhclient: Sending on   Socket/fallback
    Mar 14 22:49:12 linux-n3ld dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
    Mar 14 22:49:12 linux-n3ld dhclient: DHCPACK from 192.168.0.1
    Mar 14 22:49:12 linux-n3ld dhclient: bound to 192.168.0.3 -- renewal in 112551 seconds.
    Mar 14 22:49:14 linux-n3ld dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
    Mar 14 22:49:14 linux-n3ld dns-resolver: You can find my version in /etc/resolv.conf.netconfig
    Mar 14 22:49:14 linux-n3ld SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
    Mar 14 22:49:14 linux-n3ld SuSEfirewall2: Firewall rules successfully set
    Mar 14 22:49:16 linux-n3ld kernel: [  923.618407] wlan0: authenticate with 00:18:4d:60:5b:e2 (try 1)
    Mar 14 22:49:16 linux-n3ld kernel: [  923.620513] wlan0: authenticated
    Mar 14 22:49:16 linux-n3ld kernel: [  923.620550] wlan0: associate with 00:18:4d:60:5b:e2 (try 1)
    Mar 14 22:49:16 linux-n3ld kernel: [  923.623345] wlan0: RX AssocResp from 00:18:4d:60:5b:e2 (capab=0x431 status=0 aid=1)
    Mar 14 22:49:16 linux-n3ld kernel: [  923.623348] wlan0: associated
    Mar 14 22:49:16 linux-n3ld kernel: [  923.656426] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Mar 14 22:49:17 linux-n3ld dhclient: Internet Systems Consortium DHCP Client 4.2.0-P2
    Mar 14 22:49:17 linux-n3ld dhclient: Copyright 2004-2010 Internet Systems Consortium.
    Mar 14 22:49:17 linux-n3ld dhclient: All rights reserved.
    Mar 14 22:49:17 linux-n3ld dhclient: For info, please visit https://www.isc.org/software/dhcp/
    Mar 14 22:49:17 linux-n3ld dhclient: 
    Mar 14 22:49:17 linux-n3ld dhclient: Listening on LPF/wlan0/00:1d:e0:07:c7:73
    Mar 14 22:49:17 linux-n3ld dhclient: Sending on   LPF/wlan0/00:1d:e0:07:c7:73
    Mar 14 22:49:17 linux-n3ld dhclient: Sending on   Socket/fallback
    Mar 14 22:49:21 linux-n3ld dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
    Mar 14 22:49:21 linux-n3ld dhclient: DHCPACK from 192.168.0.1
    Mar 14 22:49:21 linux-n3ld dhclient: bound to 192.168.0.2 -- renewal in 122329 seconds.
    Mar 14 22:49:22 linux-n3ld dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
    Mar 14 22:49:22 linux-n3ld dns-resolver: You can find my version in /etc/resolv.conf.netconfig
    Mar 14 22:49:22 linux-n3ld SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
    Mar 14 22:49:22 linux-n3ld SuSEfirewall2: Firewall rules successfully set
    Mar 14 22:49:23 linux-n3ld kernel: [  930.450087] eth0: no IPv6 routers present
    Mar 14 22:49:26 linux-n3ld kernel: [  934.002078] wlan0: no IPv6 routers present
    Mar 14 22:49:29 linux-n3ld kernel: [  936.457431] sky2 0000:02:00.0: eth0: Link is down
    Mar 14 22:49:33 linux-n3ld dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
    Mar 14 22:49:33 linux-n3ld dns-resolver: You can find my version in /etc/resolv.conf.netconfig
    Mar 14 22:59:39 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 22:59:39 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:05:30 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 23:05:30 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:06:25 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 23:06:25 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:20:10 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 23:20:10 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:25:40 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 23:25:40 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:26:40 linux-n3ld gnomesu-pam-backend: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-0Vy1nE/control
    Mar 14 23:26:40 linux-n3ld gnomesu-pam-backend: gkr-pam: couldn't unlock the login keyring.
    Mar 14 23:47:30 linux-n3ld polkitd(authority=local): Operator of unix-session:/org/freedesktop/ConsoleKit/Session3 successfully authenticated as unix-user:root to gain TEMPORARY authorization for action org.freedesktop.udisks.filesystem-mount-system-internal for system-bus-name::1.25 [/usr/lib/gvfs/gvfs-gdu-volume-monitor] (owned by unix-user:mdsuse)
    Mar 14 23:47:31 linux-n3ld kernel: [ 4418.539858] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    Mar 14 23:48:03 linux-n3ld kernel: [ 4450.311931] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    Mar 14 23:48:18 linux-n3ld kernel: [ 4466.120157] EXT4-fs (sdb11): mounted filesystem with ordered data mode. Opts: (null)
    Mar 15 00:19:47 linux-n3ld sudo:   mdsuse : TTY=pts/0 ; PWD=/home/mdsuse ; USER=root ; COMMAND=/usr/bin/tail -n 100 /var/log/messages
    The /etc/resolve error appeared during the upgrade, but I don't know why.

  4. #4
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Re: Using Gnome-Shell leads to CLI login

    There are no EE's in Xorg.0.log. Just a few WW's

    Code:
     53.945] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [    53.945] 	Entry deleted from font path.
    [    53.946] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [    53.946] 	Entry deleted from font path.
    [    53.946] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [    53.946] 	Entry deleted from font path.
    ......................................
    [    53.946] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
    [    53.946] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    53.946] (WW) Disabling Keyboard0
    [    53.946] (WW) Disabling Mouse0
    And these are the last few entries
    Code:
    [    57.158] (II) No input driver/identifier specified (ignoring)
    [    57.159] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [    57.159] (II) No input driver/identifier specified (ignoring)
    [    57.162] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event9)
    [    57.162] (II) No input driver/identifier specified (ignoring)
    [    57.162] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse3)
    [    57.162] (II) No input driver/identifier specified (ignoring)
    [    57.986] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-899B40F29E166D4C90BD000CA14107CBB12CA9A7.xkm
    [    60.193] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm
    [    60.215] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm
    [    60.218] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm
    [    67.506] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm
    [    67.509] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm
    [    67.511] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-E2D559A83338742E57A9504513E9327F912B2559.xkm

  5. #5
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Using Gnome-Shell leads to CLI login

    On 2011-03-15 01:06, quackers wrote:

    > It seemed to load ok, but as I had used the terminal, when I closed the
    > terminal it seems like compiz crashed. I lost all windows borders and
    > nothing was usable.


    Compiz doesn't work for me. Ever. Actually, it worked for me better a year
    or two ago; in 11.4 it was rubbish.

    Gnome-shell I haven't tried, so I can't comment.

    > Can somebody explain why please? I realise I must have missed
    > something, but I don't know what


    Nope, I can't.

    However, as you were using 11.3 for only a week, you could consider
    installing 11.4 fresh. Otherwise, 11.4 is still very young, I'm sure it has
    many undiscovered bugs.

    You could try a new user.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  6. #6
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Using Gnome-Shell leads to CLI login

    On 2011-03-15 01:36, quackers wrote:

    > Output from Xorg.0.log is too long to post in code tags. oops.


    susepaste.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  7. #7
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Re: Using Gnome-Shell leads to CLI login

    Quote Originally Posted by robin_listas View Post
    On 2011-03-15 01:36, quackers wrote:

    > Output from Xorg.0.log is too long to post in code tags. oops.


    susepaste.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)
    I tried suse.paste - "server not found"

    Here is roughly what my last screen before login says (and I did need to reconfigure network again for wireless to work :-( )

    Attention you have modified /etc/resolve.conf Leaving it untouched
    Find my version at /etc/resolve.conf.netconfig

    System Boot Control: The system has been set up
    skipped features boot.cycle
    System Boot Control: Running /etc/init.d/boot.local done
    INIT: Entering runlevel 5
    boot logging started /dev/tty1/dev/console at time & date
    Master Resource Control: Previous runlevel: N, switching to runlevel 5
    Master Resource Control: running /etc/init.d/before.local done
    blog d: cannot load from fd 0 input/output error
    Master Resource Control: running /etc/init.d/after.local done
    Master Resource Control: runlevel 5 has been reached
    acpid: 2 rules loaded
    acpid: waiting for events; event logging is off

    Welcome to openSUSE 11.4 "CELADON" - kernel 2.6.37.1-1.2-desktop (tty1)

    Login

  8. #8
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Re: Using Gnome-Shell leads to CLI login

    Some progress :-)
    I D/L'd 11.4 and re-installed from scratch. Everything went smoothly. I updated, installed Nvidia driver - all good :-)
    I then installed gnome-shell and rebooted.
    It almost worked!
    I now get to the desktop - but no gnome-shell.
    The last 2 lines of the pre-boot blurb say something like
    "failed to acquire org.gnome. something or other", buit at least I get a network connection now and no bumping me to a CLI login.
    Improvements indeed! :-)
    Thanks for the help and suggestions, all.
    I'll await further developments!

  9. #9

    Default Re: Using Gnome-Shell leads to CLI login

    @Quakers
    I thought I had corrected the link
    which should have been SUSE Paste not bad, code is easier.

    From your messages post, even when you were at the CLI you were connected to your router as 192.168.0.3.
    However, without DNS servers specified so you wouldn't be able to connect to the Internet, cat /etc/resolv.conf for your nameservers.
    OpenDNS provides free nameservers.

    Ummm, "failed to acquire org.gnome. something or other" but its not helpful at all.
    Is it a repository issue?
    Code:
    zypper repos -Pdp | less
    Thanks for the tip on gnome-shell will install and review it, Win 7 does something similar.
    Box 1: OpenSuse 11.1/Win7 | Linux 2.6.27 Gnome | AMD 64 X2 6000+ | nVidia 8600GT | 2GB RAM
    Box 2: OpenSuse 11.2 | Linux 2.6.31 Gnome | AMD 64 3000+ | ATI X800 Pro | 1GB RAM
    Box 3: Win7 Premium Home | Intel P4 3.0Gz | ATI AIW 2006 | 2GB RAM

  10. #10
    Join Date
    Mar 2011
    Location
    Manchester, UK
    Posts
    40

    Default Re: Using Gnome-Shell leads to CLI login

    Yes, I thought I was always connected to the router, but I really don't understand how networks work, so struggled. In every installation I have made, the network always worked straight away, so I've never had to wade my way through details :-)
    I noticed the link was wrong afterwards :-)
    Output from zypper repos -Pdp | less gives
    Code:
    #  | Alias                            | Name                             | Enabl
    ed | Refresh | Priority | Type   | URI                                          
                                   | Service
    ---+----------------------------------+----------------------------------+------
    ---+---------+----------+--------+----------------------------------------------
    -------------------------------+--------
     1 | Contrib                          | Contrib                          | Yes  
       | Yes     |   99     | rpm-md | http://download.opensuse.org/repositories/ope
    nSUSE:/11.4:/Contrib/standard/ |        
     2 | Gnome/Apps                       | Gnome/Apps                       | Yes  
       | Yes     |   99     | rpm-md | http://download.opensuse.org/repositories/GNO
    ME:/Apps/openSUSE_11.4/        |        
     3 | Java                             | Java                             | Yes  
       | Yes     |   99     | rpm-md | http://download.opensuse.org/repositories/Jav
    a:/packages/openSUSE_11.4/     |        
     4 | Nvidia                           | Nvidia                           | Yes  
       | Yes     |   99     | rpm-md | ftp://download.nvidia.com/opensuse/11.4/                                    |        
     5 | Updates-for-openSUSE-11.4-11.4-0 | Updates for openSUSE 11.4 11.4-0 | Yes     | Yes     |   99     | rpm-md | http://download.opensuse.org/update/11.4/                                   |        
     6 | packman                          | packman                          | Yes     | Yes     |   99     | rpm-md | http://packman.unixheads.com/suse/openSUSE_
     7 | repo-debug                       | openSUSE-11.4-Debug              | Yes     | Yes     |   99     | yast2  | http://download.opensuse.org/debug/distribution/11.4/repo/oss/              |        
     8 | repo-debug-update                | openSUSE-11.4-Update-Debug       | No      | Yes     |   99     | NONE   | http://download.opensuse.org/debug/update/11.4/                             |        
     9 | repo-non-oss                     | openSUSE-11.4-Non-Oss            | Yes     | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/11.4/repo/non-oss/                |        
    10 | repo-oss                         | openSUSE-11.4-Oss                | Yes     | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/11.4/repo/oss/                    |        
    11 | repo-source                      | openSUSE-11.4-Source             | No      | Yes     |   99     | NONE   | http://download.opensuse.org/source/distribution/11.4/repo/oss/             |        
    lines 6-13/13 (END)
    I think it looks ok, but am not experienced in suse repos, so I could be missing something.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •