Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: After upgrading to 11.4 no drives will auto-mount

  1. #1

    Default After upgrading to 11.4 no drives will auto-mount

    I was using 11.3, everything worked fine
    Upgraded to 11.4, now no drives will automount. As a result applications like Nero and K3B cannot find my DVD drive.
    I can access the drives from an application like VLC where I can enter the device path /dev/dvd

    Dmesg and tail -f /var/log/messages output the following error:
    118.604577] udisks-daemon[6574]: segfault at 18 ip 00007f5597c6b990 sp 00007fffd2e65470 error 4 in libdbus-glib-1.so.2[7f5597c60000+20000]
    [ 118.757166] udisks-daemon[6580]: segfault at 18 ip 00007f557b302990 sp 00007fff8d0b6580 error 4 in libdbus-glib-1.so.2[7f557b2f7000+20000]
    [ 118.907891] udisks-daemon[6586]: segfault at 18 ip 00007fc9d760d990 sp 00007fff325449f0 error 4 in libdbus-glib-1.so.2[7fc9d7602000+20000]
    [ 119.057879] udisks-daemon[6592]: segfault at 18 ip 00007f327704d990 sp 00007fffd2319350 error 4 in libdbus-glib-1.so.2[7f3277042000+20000]
    [ 119.208674] udisks-daemon[6598]: segfault at 18 ip 00007fd7c2a49990 sp 00007fff4c2b1a90 error 4 in libdbus-glib-1.so.2[7fd7c2a3e000+20000]
    [ 119.358082] udisks-daemon[6604]: segfault at 18 ip 00007f404b0d7990 sp 00007fff3a4926a0 error 4 in libdbus-glib-1.so.2[7f404b0cc000+20000]
    [ 119.509471] udisks-daemon[6610]: segfault at 18 ip 00007fc35abbb990 sp 00007fff196ee0f0 error 4 in libdbus-glib-1.so.2[7fc35abb0000+20000]
    [ 119.551032] udisks-daemon[6616]: segfault at 18 ip 00007f8687818990 sp 00007fff8324c1f0 error 4 in libdbus-glib-1.so.2[7f868780d000+20000]
    [ 119.701658] udisks-daemon[6622]: segfault at 18 ip 00007ff29fb26990 sp 00007fff785736f0 error 4 in libdbus-glib-1.so.2[7ff29fb1b000+20000]
    [ 119.851642] udisks-daemon[6628]: segfault at 18 ip 00007f3acd6c3990 sp 00007fff7b88fd70 error 4 in libdbus-glib-1.so.2[7f3acd6b8000+20000]
    [ 123.773293] show_signal_msg: 19 callbacks suppressed

    I tried replacing the libdbus-glib-1 file.
    Added myself to the cdrom and disks groups

    I suspect there is a bug or incompatablitiy with HAL/dbus/udisks but I cannot track it down.

    Any advice?

  2. #2
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: After upgrading to 11.4 no drives will auto-mount

    On 2011-03-14 03:36, Randy1979 wrote:

    > Dmesg and tail -f /var/log/messages output the following error:
    > 118.604577] udisks-daemon[6574]: segfault at 18 ip 00007f5597c6b990 sp
    > 00007fffd2e65470 error 4 in libdbus-glib-1.so.2[7f5597c60000+20000]


    Bugzilla.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  3. #3
    Join Date
    Feb 2010
    Location
    Los Angeles, CA, USA
    Posts
    148

    Default Re: After upgrading to 11.4 no drives will auto-mount

    Did you check the settings ?

    Personal Settings -> Removable Devices -> (check) Enable automatic mounting of removable devices
    WE ARE LINUX... RESISTANCE IS FUTILE !!
    openSUSE 13.1, KDE
    2 daughters, 1 Dog, lots of passion for Linux

  4. #4

    Default Re: After upgrading to 11.4 no drives will auto-mount

    Yes automounting is on.
    This also happens when Im logged in as root. I tried chmod 777 /dev/dvd/ also.

  5. #5
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: After upgrading to 11.4 no drives will auto-mount

    On 2011-03-14 20:36, Randy1979 wrote:
    >
    > Yes automounting is on.
    > This also happens when Im logged in as root. I tried chmod 777
    > /dev/dvd/ also.


    All that is useless if one of the tools is crashing with a segfault.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  6. #6
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    11,304
    Blog Entries
    2

    Default Re: After upgrading to 11.4 no drives will auto-mount

    Just a thought.
    Do you see your drives in /media/ instead of /dev/?

    That's where everything is in both my 11.3 and 11.4.

    I'm suspecting your 11.3 is actually an upgrade from an earlier version supporting the /dev/ path for backwards compatibility.

    Also, IIRC earlier than 11.3 also supported Hotplug which has been deprecated in favor of udev for device recognition and mounting, also in 11.4 elimination of HAL which could have dropped Hotplug support finally and completely (Everyone is dropping HAL, not just openSUSE).

    Tony

  7. #7

    Default Re: After upgrading to 11.4 no drives will auto-mount

    No they show up in /dev

    Yes it is an upgrade. My system is still running HAL... so 11.4 shouldn't even have that?

    I downgraded udisks to 1.0.0.1-2, the newest version from 11.3, and now the drive detection and hot plug works.

    Is the best solution to do a clean install of 11.4?

  8. #8
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: After upgrading to 11.4 no drives will auto-mount

    On 2011-03-15 15:06, Randy1979 wrote:

    > I downgraded udisks to 1.0.0.1-2, the newest version from 11.3, and now
    > the drive detection and hot plug works.


    Check in YaST package management how many packages show in red. I'll bet
    you have a few.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  9. #9

    Default Re: After upgrading to 11.4 no drives will auto-mount

    I went through and removed them except Kdenlive... I didnt remove it yet.
    I installed the newest version of udisks again and the crash was back.

    I disabled haldaemon and everything seems to work with out it. I thought that was related, but it doesnt seem to try and use it. I did not uninstall it however because it wanted to change all programs to i586 architecture vs 86_64 for some reason.

    I guess for now I will leave it with the older udisks. I dont notice any performance problems or anything.

    Is there a way to stop the sytem from auto-updating just udisks? It keeps trying to install the broken version.

  10. #10
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,748

    Default Re: After upgrading to 11.4 no drives will auto-mount

    You can blacklist packages from Yast right click the package and select the appropriate selection.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •