Results 1 to 5 of 5

Thread: Jedit problem in opensuse 11.3

  1. #1

    Default Jedit problem in opensuse 11.3

    I am facing problems to run jedit in opensuse under several JVM including IcedTea and HotSpot.
    Here is the log message I am getting.

    #
    # A fatal error has been detected by the Java Runtime Environment:
    #
    # SIGSEGV (0xb) at pc=0x00007f3f98f066a0, pid=7894, tid=139910981822224
    #
    # JRE version: 6.0_23-b05
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 compressed oops)
    # Problematic frame:
    # C [ld-linux-x86-64.so.2+0x136a0]
    #
    # If you would like to submit a bug report, please visit:
    # HotSpot Virtual Machine Error Reporting Page
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    #

    --------------- T H R E A D ---------------

    Current thread (0x00000000403a0800): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=7954, stack(0x00007f3f904f2000,0x00007f3f905f3000)]

    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000

    Registers:
    RAX=0x0000000000000001, RBX=0x00000000401b66c0, RCX=0x000000001fbae3ff, RDX=0x00000000bfebfbff
    RSP=0x00007f3f905f0398, RBP=0x00007f3f905f04b0, RSI=0x0000000000000000, RDI=0x0000000000000001
    R8 =0x0000000000000000, R9 =0x0000000000000000, R10=0x00007f3f905f0310, R11=0x00000000401b66c0
    R12=0x0000000000000000, R13=0x00007f3f905f04d8, R14=0x00000000401c88a0, R15=0x0000000000000000
    RIP=0x00007f3f98f066a0, EFL=0x0000000000010202, CSGSFS=0x0000000000000033, ERR=0x0000000000000000
    TRAPNO=0x000000000000000d

    Register to memory mapping:

    RAX=0x0000000000000001
    0x0000000000000001 is pointing to unknown location

    RBX=0x00000000401b66c0
    0x00000000401b66c0 is pointing to unknown location

    RCX=0x000000001fbae3ff
    0x000000001fbae3ff is pointing to unknown location

    RDX=0x00000000bfebfbff
    0x00000000bfebfbff is pointing to unknown location

    RSP=0x00007f3f905f0398
    0x00007f3f905f0398 is pointing into the stack for thread: 0x00000000403a0800
    "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable [0x00007f3f905f0000]
    java.lang.Thread.State: RUNNABLE

    RBP=0x00007f3f905f04b0
    0x00007f3f905f04b0 is pointing into the stack for thread: 0x00000000403a0800
    "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable [0x00007f3f905f0000]
    java.lang.Thread.State: RUNNABLE

    RSI=0x0000000000000000
    0x0000000000000000 is pointing to unknown location

    RDI=0x0000000000000001
    0x0000000000000001 is pointing to unknown location

    R8 =0x0000000000000000
    0x0000000000000000 is pointing to unknown location

    R9 =0x0000000000000000
    0x0000000000000000 is pointing to unknown location

    R10=0x00007f3f905f0310
    0x00007f3f905f0310 is pointing into the stack for thread: 0x00000000403a0800
    "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable [0x00007f3f905f0000]
    java.lang.Thread.State: RUNNABLE

    R11=0x00000000401b66c0
    0x00000000401b66c0 is pointing to unknown location

    R12=0x0000000000000000
    0x0000000000000000 is pointing to unknown location

    R13=0x00007f3f905f04d8
    0x00007f3f905f04d8 is pointing into the stack for thread: 0x00000000403a0800
    "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable [0x00007f3f905f0000]
    java.lang.Thread.State: RUNNABLE

    R14=0x00000000401c88a0
    0x00000000401c88a0 is pointing to unknown location

    R15=0x0000000000000000
    0x0000000000000000 is pointing to unknown location

  2. #2

    Default Re: Jedit problem in opensuse 11.3

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Did it ever work? Have you tried renaming the ~/.jedit directory? Are
    you on the current version of Java and Jedit? Mine works with 11.3 x86_64
    using the following version of JEdit:

    <quote>
    Name : jedit Relocations: (not relocatable)
    Version : 4.2 Vendor: openSUSE
    Release : 315.1.1 Build Date: Thu 12 Aug 2010
    10:43:05 AM MDT
    Install Date: Tue 26 Oct 2010 12:58:49 PM MDT Build Host: build32
    Group : Productivity/Editors/Other Source RPM:
    jedit-4.2-315.1.1.src.rpm
    Size : 4671332 License: GPLv2+
    Signature : RSA/8, Thu 12 Aug 2010 10:43:22 AM MDT, Key ID b88b2fd43dbdc284
    Packager : http://bugs.opensuse.org
    URL : http://www.jedit.org/
    Summary : Programmer's Text Editor Written in Java
    Description :
    jEdit is a cross-platform programmer's text editor written in Java.

    Some of jEdit's features include:

    * Built-in macro language (BeanShell)

    * Extensible plug-in architecture with more than 80 plug-ins
    available

    * Plug-ins can be downloaded and installed from within jEdit using
    the plug-in manager feature

    * Syntax highlighting for more than 80 languages

    * Supports a large number of character encodings including UTF8 and
    Unicode

    * Autoindenting of source code

    * Folding (indent and marker based)

    * Word wrap

    * Unlimited undo and redo

    * Highly configurable and customizable

    * Every other feature, both basic and advanced, that you would expect
    to find in a text editor
    Distribution: openSUSE 11.3

    </quote>


    Good luck.





    On 02/28/2011 06:36 PM, koushikusu wrote:
    >
    > I am facing problems to run jedit in opensuse under several JVM
    > including IcedTea and HotSpot.
    > Here is the log message I am getting.
    >
    > #
    > # A fatal error has been detected by the Java Runtime Environment:
    > #
    > # SIGSEGV (0xb) at pc=0x00007f3f98f066a0, pid=7894,
    > tid=139910981822224
    > #
    > # JRE version: 6.0_23-b05
    > # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.0-b09 mixed mode
    > linux-amd64 compressed oops)
    > # Problematic frame:
    > # C [ld-linux-x86-64.so.2+0x136a0]
    > #
    > # If you would like to submit a bug report, please visit:
    > # 'HotSpot Virtual Machine Error Reporting Page'
    > (http://java.sun.com/webapps/bugreport/crash.jsp)
    > # The crash happened outside the Java Virtual Machine in native code.
    > # See problematic frame for where to report the bug.
    > #
    >
    > --------------- T H R E A D ---------------
    >
    > Current thread (0x00000000403a0800): JavaThread "AWT-EventQueue-0"
    > [_thread_in_native, id=7954,
    > stack(0x00007f3f904f2000,0x00007f3f905f3000)]
    >
    > siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (),
    > si_addr=0x0000000000000000
    >
    > Registers:
    > RAX=0x0000000000000001, RBX=0x00000000401b66c0, RCX=0x000000001fbae3ff,
    > RDX=0x00000000bfebfbff
    > RSP=0x00007f3f905f0398, RBP=0x00007f3f905f04b0, RSI=0x0000000000000000,
    > RDI=0x0000000000000001
    > R8 =0x0000000000000000, R9 =0x0000000000000000, R10=0x00007f3f905f0310,
    > R11=0x00000000401b66c0
    > R12=0x0000000000000000, R13=0x00007f3f905f04d8, R14=0x00000000401c88a0,
    > R15=0x0000000000000000
    > RIP=0x00007f3f98f066a0, EFL=0x0000000000010202,
    > CSGSFS=0x0000000000000033, ERR=0x0000000000000000
    > TRAPNO=0x000000000000000d
    >
    > Register to memory mapping:
    >
    > RAX=0x0000000000000001
    > 0x0000000000000001 is pointing to unknown location
    >
    > RBX=0x00000000401b66c0
    > 0x00000000401b66c0 is pointing to unknown location
    >
    > RCX=0x000000001fbae3ff
    > 0x000000001fbae3ff is pointing to unknown location
    >
    > RDX=0x00000000bfebfbff
    > 0x00000000bfebfbff is pointing to unknown location
    >
    > RSP=0x00007f3f905f0398
    > 0x00007f3f905f0398 is pointing into the stack for thread:
    > 0x00000000403a0800
    > "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable
    > [0x00007f3f905f0000]
    > java.lang.Thread.State: RUNNABLE
    >
    > RBP=0x00007f3f905f04b0
    > 0x00007f3f905f04b0 is pointing into the stack for thread:
    > 0x00000000403a0800
    > "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable
    > [0x00007f3f905f0000]
    > java.lang.Thread.State: RUNNABLE
    >
    > RSI=0x0000000000000000
    > 0x0000000000000000 is pointing to unknown location
    >
    > RDI=0x0000000000000001
    > 0x0000000000000001 is pointing to unknown location
    >
    > R8 =0x0000000000000000
    > 0x0000000000000000 is pointing to unknown location
    >
    > R9 =0x0000000000000000
    > 0x0000000000000000 is pointing to unknown location
    >
    > R10=0x00007f3f905f0310
    > 0x00007f3f905f0310 is pointing into the stack for thread:
    > 0x00000000403a0800
    > "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable
    > [0x00007f3f905f0000]
    > java.lang.Thread.State: RUNNABLE
    >
    > R11=0x00000000401b66c0
    > 0x00000000401b66c0 is pointing to unknown location
    >
    > R12=0x0000000000000000
    > 0x0000000000000000 is pointing to unknown location
    >
    > R13=0x00007f3f905f04d8
    > 0x00007f3f905f04d8 is pointing into the stack for thread:
    > 0x00000000403a0800
    > "AWT-EventQueue-0" prio=10 tid=0x00000000403a0800 nid=0x1f12 runnable
    > [0x00007f3f905f0000]
    > java.lang.Thread.State: RUNNABLE
    >
    > R14=0x00000000401c88a0
    > 0x00000000401c88a0 is pointing to unknown location
    >
    > R15=0x0000000000000000
    > 0x0000000000000000 is pointing to unknown location
    >
    >

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.15 (GNU/Linux)
    Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

    iQIcBAEBAgAGBQJNbFKVAAoJEF+XTK08PnB5rRcQAJxYhm0ZeRjH3juI5Y0daKY1
    8S54c/cY3Xa1l7MvtAeIMq6Vo5IcmtN/BpA/XQ3cjkQs5zMYQZG3LpYewbbLcdVU
    34McIjbutYWWxOff8zVqi0pzLpu+8dPyC1k58UW1sFPKMCwmdQdN89Tv0TlojJNv
    hJ8TY5+jpUiheqYxHdVH0yoMOxVnHG8X3X/LijXY0eW7yhlFmuWD2jNuR0Qk6MsZ
    X5GfHoIPbIQQqBgkIr7BzElfugjz7xZjsi2hy9duO2Abb4eqBRIbNOcWF2rjpIL1
    qPOzXcaVJJjICdRV7bP/pULgJ3lwL1dLtm8aFqlbv2yFJbFtxHHwlE+5xJjHShMP
    khfV/3Agabbku9NEWjtJ3sOYBGF22lkGZZpfroaS/M4jtQnqw/b2n24xyZaezu8v
    Fza0vHAE0LAvDNo2Rc7yGSRkqTKNfp+ecVBR2xiox0s89zsFq54PqRqjIkOJUP5H
    a3/SDjeJ13DJ5VfgqLDB090dPKPvgJXdHEr+B+4XhYMm5v063yyowMyyxsqnawV9
    lZQUzmrfJptf5mosjaFyh+xkTF3Vi4m34zX4r/7G1BafpDXyW/5XSi1P8N3I810i
    U+3QSIFUX6P0m2IO15Tj0oTmNVnwwgXMVt6L4ubUw3LfN3xcGNA5CEa6zo54vGEk
    oVTJSWznXHuWo/kr92tO
    =lMgA
    -----END PGP SIGNATURE-----

  3. #3

    Default Re: Jedit problem in opensuse 11.3

    Thanks for your message. No, it has never worked. I have tried both 4.2 and 4.4pre versions, without any success.
    From the error message, it appears to be coming from the ld-linux library, but it is not clear why it is triggered in the first place.

    I just tried renaming .jedit, but same result.

  4. #4
    Join Date
    Jun 2008
    Location
    Earth - Denmark
    Posts
    10,730

    Default Re: Jedit problem in opensuse 11.3

    On 03/01/2011 05:06 AM, koushikusu wrote:
    >
    > I just tried renaming .jedit, but same result.
    >


    you might try using YaST to add a new test user, then log out and log
    back in as that test user, and see if anything changes..

    i say that because last week i installed (trying to duplicate
    another's problem in one of these openSUSE fora) jEdit (4.2final)
    using YaST and the jEdit package in the standard openSUSE repos (OSS
    and non-OSS) onto the system listed in my sig, and it worked
    *perfectly* here, on my machine..

    so, the code seems to be good if installed on a system in which only
    the following Java has been installed by YaST, using the Java packages
    in the openSUSE repos (OSS and non-OSS)..

    Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
    Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)

    with *zero* download or manual install of program files from any
    non-openSUSE source or manual customization of java file locations,
    java paths, jedit personalizations, etc etc etc--and, it works
    perfectly still, here..

    --
    DenverD
    CAVEAT: http://is.gd/bpoMD
    [NNTP posted w/openSUSE 11.3, KDE4.5.5, Thunderbird3.0.11, nVidia
    173.14.28 3D, Athlon 64 3000+]
    "It is far easier to read, understand and follow the instructions than
    to undo the problems caused by not." DD 23 Jan 11

  5. #5

    Default Re: Jedit problem in opensuse 11.3

    New user didn't work, nor did switching to KDE from GNOME.

    The only difference I see is that I have Java HotSpot(R) Server VM instead of Client VM as yours.
    Not sure if that cause the problem.

    Quote Originally Posted by DenverD View Post
    On 03/01/2011 05:06 AM, koushikusu wrote:
    >
    > I just tried renaming .jedit, but same result.
    >


    you might try using YaST to add a new test user, then log out and log
    back in as that test user, and see if anything changes..

    i say that because last week i installed (trying to duplicate
    another's problem in one of these openSUSE fora) jEdit (4.2final)
    using YaST and the jEdit package in the standard openSUSE repos (OSS
    and non-OSS) onto the system listed in my sig, and it worked
    *perfectly* here, on my machine..

    so, the code seems to be good if installed on a system in which only
    the following Java has been installed by YaST, using the Java packages
    in the openSUSE repos (OSS and non-OSS)..

    Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
    Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)

    with *zero* download or manual install of program files from any
    non-openSUSE source or manual customization of java file locations,
    java paths, jedit personalizations, etc etc etc--and, it works
    perfectly still, here..

    --
    DenverD
    CAVEAT: C A V E A T
    [NNTP posted w/openSUSE 11.3, KDE4.5.5, Thunderbird3.0.11, nVidia
    173.14.28 3D, Athlon 64 3000+]
    "It is far easier to read, understand and follow the instructions than
    to undo the problems caused by not." DD 23 Jan 11

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •