Results 1 to 10 of 10

Thread: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

  1. #1

    Default Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
    Получение пакет kernel-desktop-base-2.6.37-9.1.x86_64 (4/15), 11,5 MiB (18,7 MiB после распаковки)
    Получение: kernel-desktop-base-2.6.37-9.1.x86_64.rpm [готово (294,9 KiB/s)]
    Установка: kernel-desktop-base-2.6.37-9.1 [готово]
    Дополнительный вывод rpm:

    Kernel image: /boot/vmlinuz-2.6.37-9-desktop
    Initrd image: /boot/initrd-2.6.37-9-desktop
    Root device: /dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 (/dev/sdc1) (mounted on / as ext4)
    Resume device: /dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part2 (/dev/sdc2)
    find: `/lib/modules/2.6.37-9-desktop/kernel/drivers/ata': No such file or directory
    modprobe: Module processor not found.
    WARNING: no dependencies for kernel module 'processor' found.
    modprobe: Module thermal not found.
    WARNING: no dependencies for kernel module 'thermal' found.
    modprobe: Module fan not found.
    WARNING: no dependencies for kernel module 'fan' found.
    modprobe: Module ext4 not found.
    WARNING: no dependencies for kernel module 'ext4' found.
    Features: block usb resume.userspace resume.kernel
    Bootsplash: openSUSE (1280x1024)
    35320 blocks

    And i can not reboot with new kernel

  2. #2

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    sudo zypper up
    root's password:
    Получение метаданных репозитория 'SUSE_Tumbleweed' [готово]
    Сбор кэша репозитория 'SUSE_Tumbleweed' [готово]
    Получение метаданных репозитория 'VLC' [готово]
    Сбор кэша репозитория 'VLC' [готово]
    Получение метаданных репозитория 'openSUSE-11.3-Update' [готово]
    Сбор кэша репозитория 'openSUSE-11.3-Update' [готово]
    Загрузка данных о репозиториях...
    Чтение установленных пакетов...

    Следующие обновления НЕ будут установлены:
    aaa_base kernel-desktop libvlc5 parted preload-kmp-desktop

    Будут обновлены следующие пакеты:
    hdparm kernel-desktop-base libavcodec52 libavcore0 libavformat52 libavutil50 libpostproc51 libswscale0 libvlc5 libvlccore4 preload vlc vlc-gnome vlc-noX vlc-qt

    15 пакетов для обновления.
    Полный размер загрузки: 21,2 MiB. После этой операции будет использовано дополнительно 66,0 KiB.
    Продолжить? [y/n/?] (y): y
    Получение пакет libvlccore4-1.1.7-3.1.x86_64 (1/15), 365,0 KiB (944,0 KiB после распаковки)
    Получение: libvlccore4-1.1.7-3.1.x86_64.rpm [готово (230,0 KiB/s)]
    Установка: libvlccore4-1.1.7-3.1 [готово]
    Получение пакет libavutil50-0.6.1.20110131-1.1.x86_64 (2/15), 41,0 KiB (83,0 KiB после распаковки)
    Получение: libavutil50-0.6.1.20110131-1.1.x86_64.rpm [готово]
    Установка: libavutil50-0.6.1.20110131-1.1 [готово]
    Получение пакет preload-1.2-58.1.x86_64 (3/15), 31,0 KiB (75,0 KiB после распаковки)
    Получение: preload-1.2-58.1.x86_64.rpm [готово]
    Установка: preload-1.2-58.1 [готово]
    Получение пакет kernel-desktop-base-2.6.37-9.1.x86_64 (4/15), 11,5 MiB (18,7 MiB после распаковки)
    Получение: kernel-desktop-base-2.6.37-9.1.x86_64.rpm [готово (294,9 KiB/s)]
    Установка: kernel-desktop-base-2.6.37-9.1 [готово]
    Дополнительный вывод rpm:

    Kernel image: /boot/vmlinuz-2.6.37-9-desktop
    Initrd image: /boot/initrd-2.6.37-9-desktop
    Root device: /dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 (/dev/sdc1) (mounted on / as ext4)
    Resume device: /dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part2 (/dev/sdc2)
    find: `/lib/modules/2.6.37-9-desktop/kernel/drivers/ata': No such file or directory
    modprobe: Module processor not found.
    WARNING: no dependencies for kernel module 'processor' found.
    modprobe: Module thermal not found.
    WARNING: no dependencies for kernel module 'thermal' found.
    modprobe: Module fan not found.
    WARNING: no dependencies for kernel module 'fan' found.
    modprobe: Module ext4 not found.
    WARNING: no dependencies for kernel module 'ext4' found.
    Features: block usb resume.userspace resume.kernel
    Bootsplash: openSUSE (1280x1024)
    35320 blocks

    This is output of zypper lr -d
    # | Псевдоним | Имя | Включён | Обновление | Приоритет | Тип | URI | Служба
    --+-----------------+-----------------------+---------+------------+-----------+--------+-----------------------------------------------------------------------------+-------
    1 | SUSE_Tumbleweed | SUSE_Tumbleweed | Да | Да | 100 | rpm-md | Index of /repositories/openSUSE:/Tumbleweed/standard |
    2 | Suse_DVD | Suse_DVD | Да | Нет | 99 | yast2 | iso:///?iso=openSUSE-11.3-DVD-x86_64.iso&url=file:///st4/iso/OpenSUSE/11_3/ |
    3 | VLC | VLC | Да | Да | 99 | rpm-md | Index of /pub/vlc/SuSE/11.3/ |
    4 | repo-debug | openSUSE-11.3-Debug | Да | Да | 99 | yast2 | Index of /debug/distribution/11.3/repo/oss |
    5 | repo-non-oss | openSUSE-11.3-Non-Oss | Да | Да | 99 | yast2 | Index of /distribution/11.3/repo/non-oss |
    6 | repo-oss | openSUSE-11.3-Oss | Да | Да | 99 | yast2 | Index of /distribution/11.3/repo/oss |
    7 | repo-source | openSUSE-11.3-Source | Да | Да | 99 | yast2 | Index of /source/distribution/11.3/repo/oss |
    8 | repo-update | openSUSE-11.3-Update | Да | Да | 99 | rpm-md | Index of /update/11.3 |


    and this is my menu.lst. I can boot only from
    title Desktop -- openSUSE 11.3 - 2.6.34.7-0.7
    # Modified by YaST2. Last modification on Wed Feb 9 07:17:55 MSK 2011
    # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
    # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader

    default 0
    timeout 8
    gfxmenu (hd2,0)/boot/message

    ###Don't change this comment - YaST2 identifier: Original name: linux###
    title Desktop -- openSUSE 11.3 - 2.6.37-11
    root (hd2,0)
    kernel /boot/vmlinuz-2.6.37-11-desktop root=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 resume=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part2 splash=silent quiet showopts notsc vga=0x317 nomodeset
    initrd /boot/initrd-2.6.37-11-desktop

    ###Don't change this comment - YaST2 identifier: Original name: failsafe###
    title Failsafe -- openSUSE 11.3 - 2.6.37-11
    root (hd2,0)
    kernel /boot/vmlinuz-2.6.37-11-desktop root=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe notsc vga=0x317
    initrd /boot/initrd-2.6.37-11-desktop

    ###Don't change this comment - YaST2 identifier: Original name: linux###
    title Desktop -- openSUSE 11.3 - 2.6.34.7-0.7
    root (hd2,0)
    kernel /boot/vmlinuz-2.6.34.7-0.7-desktop root=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 resume=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part2 splash=silent quiet showopts notsc vga=0x31A nomodeset
    initrd /boot/initrd-2.6.34.7-0.7-desktop

    ###Don't change this comment - YaST2 identifier: Original name: failsafe###
    title Failsafe -- openSUSE 11.3 - 2.6.34.7-0.7
    root (hd2,0)
    kernel /boot/vmlinuz-2.6.34.7-0.7-desktop root=/dev/disk/by-id/ata-ST31500341AS_9VS28R1F-part1 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe notsc vga=0x31A nomodeset
    initrd /boot/initrd-2.6.34.7-0.7-desktop

    ###Don't change this comment - YaST2 identifier: Original name: Desktop -- openSUSE 11.3 - 2.6.36-rc7-26 (/dev/sdb1)###
    title Desktop -- openSUSE 11.3 - 2.6.36-rc7-26 (/dev/sdb1)
    rootnoverify (hd1,0)
    chainloader +1

    ###Don't change this comment - YaST2 identifier: Original name: windows###
    title Windows
    rootnoverify (hd0,0)
    chainloader +1


    this is lsmod | grep ext4 output from title Desktop -- openSUSE 11.3 - 2.6.34.7-0.7
    ext4 401916 4
    jbd2 100410 1 ext4
    crc16 1715 2 l2cap,ext4

  3. #3
    Join Date
    Oct 2008
    Location
    near Munich
    Posts
    507

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    Just a guess, looking at this line:

    > find: `/lib/modules/2.6.37-9-desktop/kernel/drivers/ata': No such file
    > or directory


    Looks like mkinitrd does not find the driver for your harddrive. Therefore
    it is not included in initrd and the kernel can not access the harddrive
    when booting.

    But I have no idea, why the the kernel module is not found by mkinitrd ...

  4. #4
    Join Date
    Sep 2010
    Location
    Poland
    Posts
    1,927

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    Why don't You try to install the kernel from this repo and see if it works for You ?
    Index of /repositories/Kernel:/HEAD/openSUSE_11.3

    Best regards,
    Greg
    Best regards,
    Greg

  5. #5

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    Exact same problem here :

    I have added tumbleweed cause it's a great leap IMO. But after first update, it installs a new kernel that misses a lot of modules, ext4 among of them. Unable to boot this latest kernel. No very useful this tumbleweed if it cannot work stable as announced

  6. #6

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    I have still same problem with this repo. I cannot boot after kernel update to 2.6.37.4. I see only black screen with GRUB and that's all. Pretty unstable repo maybe worse than kernel:HEAD repo:-(

  7. #7
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,880
    Blog Entries
    3

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & update kernel

    They did warn you that Tumbleweed is not as stable as a regular distribution.

    I added Tumbleweed to my older laptop. Then when I went to update to Tumbleweed, it indicated a dependency problem. It wanted to remove vmware and another component (forgot what it was). I bailed out, and removed the Tumbleweed repo.

    In the normal scheme of things, I never install vmware, and removing that would not have been a problem. But it auto-installed with the live CD, so I figure that I should play with it a little before I abandon it.
    openSUSE Leap 15.1; KDE Plasma 5;
    testing Leap 15.2Alpha

  8. #8
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & updatekernel

    On 2011-03-21 14:06, hellgast wrote:
    >
    > I have still same problem with this repo. I cannot boot after kernel
    > update to 2.6.37.4. I see only black screen with GRUB and that's all.
    > Pretty unstable repo maybe worse than kernel:HEAD repo:-(


    It is not a normal repo, it means that you have changed distro version to
    tumbleweed, aka factory.bis. It is no longer opensuse 11.3 nor 11.4

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

  9. #9
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,769

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & updatekernel

    My guess is that if you go the Tumbleweed way you need to disable the normal repo's. Mixing the two may cause problems.

  10. #10
    Join Date
    Feb 2009
    Location
    Spain
    Posts
    25,547

    Default Re: Can't boot on ext4 partition after add Thumbleweed repo & updatekernel

    On 2011-03-21 15:36, gogalthorp wrote:
    >
    > My guess is that if you go the Tumbleweed way you need to disable the
    > normal repo's. Mixing the two may cause problems.


    Of course.

    --
    Cheers / Saludos,

    Carlos E. R.
    (from 11.2 x86_64 "Emerald" at Telcontar)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •