Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Problem with opening my drives ( ext4 & ntfs)

  1. #1

    Default Problem with opening my drives ( ext4 & ntfs)

    Hi every one
    how are you my friends ?

    I can't Open my drives
    when i click on them there is a error corrupt and i don't know what should i do then?
    so now i cant open my drives
    I have two kind of format ( ext4 and ntfs ) and both of them don't open
    I put a snapshot of my system here , maybe will be useful

    please Help me
    what should i do?

    thanks to ALL
    the Pic

  2. #2
    Join Date
    Jun 2008
    Location
    Earth - Denmark
    Posts
    10,730

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    amirsanaii wrote:
    > 'the Pic' (http://pic0.picsorlinks.com/ph_or_65099_1c0fd9d.png)




    first: do NOT panic and start trying everything you can because it IS
    possible to do more damage than good..

    the pic you posted does NOT say any drive is corrupt--so, do NOT try
    to "fix" that...rather it says you don't have an application which can
    open them...

    but, that doesn't make sense...tell us: what operating system and
    version are you running...i can see you have KDE, but we can't see
    which version....and, is this a fresh new install....or did it work a
    while and suddenly you couldn't access some drives..

    use patience and calmness..

    --
    DenverD
    CAVEAT: http://is.gd/bpoMD [posted via NNTP w/openSUSE 10.3]

  3. #3

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    thank you for your reply
    I install this OS today for first time
    this is my system information:

    Click for pic

  4. #4
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,698

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    Ok from the command line show us output of

    mount

    Note you can copy and paste in/from the konsole by using the menus

  5. #5
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,729
    Blog Entries
    20

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    You should access your drives via the file manager anyway.
    In kde they need to be entered in fstab for ease of use

    Code:
    cat /etc/fstab
    and as su -

    Code:
    fdisk -l
    Let us see the results, and we can advise
    Leap 15.1_KDE
    My Articles Was I any help? If yes: Click the star below

  6. #6

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    Quote Originally Posted by gogalthorp View Post
    Ok from the command line show us output of

    mount

    Note you can copy and paste in/from the konsole by using the menus

    Hi
    thanks for your reply
    this is the output of my konsole :

    mount
    /dev/sda8 on / type ext4 (rw,acl,user_xattr)
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw)
    devtmpfs on /dev type devtmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,mode=1777)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    /dev/mapper/cr_sda7 on /home type ext4 (rw,_netdev,acl,user_xattr)
    fusectl on /sys/fs/fuse/connections type fusectl (rw)
    /dev/sda1 on /windows/C type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096,default_permissions)
    /dev/sda2 on /windows/D type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096,default_permissions)
    /dev/sda3 on /windows/E type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096,default_permissions)
    /dev/sda5 on /windows/G type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096,default_permissions)
    securityfs on /sys/kernel/security type securityfs (rw)
    rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

  7. #7

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    Quote Originally Posted by caf4926 View Post
    You should access your drives via the file manager anyway.
    In kde they need to be entered in fstab for ease of use

    Code:
    cat /etc/fstab
    and as su -

    Code:
    fdisk -l
    Let us see the results, and we can advise

    thank you for your reply

    ok I use those code and there is the result :
    cat /etc/fstab
    Code:
    /dev/sda8            /                    ext4       acl,user_xattr        1 1
    /dev/mapper/cr_sda7  /home                ext4       acl,user_xattr,nofail 0 0
    /dev/disk/by-id/ata-WDC_WD5000BEVT-08A0RT1_WD-WXF1A50N2132-part6 swap                 swap       defaults              0 0
    /dev/disk/by-id/ata-WDC_WD5000BEVT-08A0RT1_WD-WXF1A50N2132-part1 /windows/C           ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0
    /dev/disk/by-id/ata-WDC_WD5000BEVT-08A0RT1_WD-WXF1A50N2132-part2 /windows/D           ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0
    /dev/disk/by-id/ata-WDC_WD5000BEVT-08A0RT1_WD-WXF1A50N2132-part3 /windows/E           ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0
    /dev/disk/by-id/ata-WDC_WD5000BEVT-08A0RT1_WD-WXF1A50N2132-part5 /windows/G           ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0
    proc                 /proc                proc       defaults              0 0
    sysfs                /sys                 sysfs      noauto                0 0
    debugfs              /sys/kernel/debug    debugfs    noauto                0 0
    usbfs                /proc/bus/usb        usbfs      noauto                0 0
    devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
    amirsanaii@linux-ix0h:~> su -

    and the next one :
    linux-ix0h:~ # fdisk -l
    Code:
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2b228d36
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1               1          13      102400    7  HPFS/NTFS
    Partition 1 does not end on cylinder boundary.
    /dev/sda2              13        6387    51200000    7  HPFS/NTFS
    /dev/sda3            6387       17229    87088128    7  HPFS/NTFS
    /dev/sda4   *       17229       60802   349993984    f  W95 Ext'd (LBA)
    /dev/sda5           38902       60802   175911936    7  HPFS/NTFS
    /dev/sda6           17229       18273     8378287+  82  Linux swap / Solaris
    /dev/sda7           18273       25847    60846080   83  Linux
    /dev/sda8           25848       38902   104855552   83  Linux
    Partition table entries are not in disk order

    Disk /dev/dm-0: 62.3 GB, 62305333248 bytes
    255 heads, 63 sectors/track, 7574 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000

    Disk /dev/dm-0 doesn't contain a valid partition table


    and the another thing is that I can access my windows drive from /root/windows
    Last edited by caf4926; 13-Dec-2010 at 05:41.

  8. #8
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,763
    Blog Entries
    14

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    Hi,

    Could you please put output between [code]YOUR OUTPUT HERE[/code]? Makes it much more readable.

    Also, post the output Caf4926 asked for. I don't quite understand how you got to having an fstab like this. Something went wrong during the partitioning stage of the install. And......like DenverD says, do not start trying things in the mean time. You might cause (serious) damage.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  9. #9
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,729
    Blog Entries
    20

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    Some strange device mapper results
    I can't decide if the OP is using LVM or not

    Equally strange, the windows entries look OK.

    Please people... If you do strange stuff - expect strange happenings.
    Leap 15.1_KDE
    My Articles Was I any help? If yes: Click the star below

  10. #10
    Join Date
    Jun 2008
    Location
    Earth - Denmark
    Posts
    10,730

    Default Re: Problem with opening my drives ( ext4 & ntfs)

    amirsanaii wrote:
    > /dev/sda1 on /windows/C type fuseblk
    > /dev/sda2 on /windows/D type fuseblk
    > /dev/sda3 on /windows/E type fuseblk
    > /dev/sda5 on /windows/G type fuseblk


    what kind of hair-brain file system has Mr. Bill let loose on the
    world this time?

    my manual for mount doesn't say i can read the "fuseblk" file system,
    does yours?

    --
    DenverD
    CAVEAT: http://is.gd/bpoMD [posted via NNTP w/openSUSE 10.3]

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •