Quote Originally Posted by caf4926 View Post
Until you get suse booting again that will be difficult.

Switching the boot flag to the extended partition is done with Parted Magic
My guess it's on sda1 now
But we didn't get to see your disk info. You can get that from parted magic too. Open the terminal and type: fdisk -l
(that's a lower case L)

You will have to toggle the flag of the current partition and set it to extended
Then carefully follow the grub guide to install grub again, adjusting the numbering as appropriate for your settings.

Actually - if you post the fdisk info and the part that answers (find /boot/grub/menu.lst) we can tell you exactly how to proceed if you can't figure it.
OK, here's the output of 'fdisk -l'
================================================
Disk /dev/sda: 320.0 GB, 320072933375 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifiers: 0xc20dd326

Device Boot Start End Blocks Id System
/dev/sda1 * 1 52 409600 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 52 19556 156672000 7 HPFS/NTFS
/dev/sda3 * 19557 38913 155485102+ f W95 Ext'd (LBA)
/dev/sda5 19557 19818 2104483+ 82 Linux swap / Solaris
/dev/sda6 19819 22429 20972826 83 Linux
/dev/sda7 22430 38913 132407698+ 83 Linux