Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Build failed during RPM installation with kernel-rt

  1. #1

    Unhappy Build failed during RPM installation with kernel-rt

    Hi, i'm trying to build an appliance with kernel-rt from
    the j.eng repository to build an openSUSE based audio OS
    for running on a notebook.
    Everything is fine (there are no errors shown in RPM Selection)
    until i try to build the appliance. Then i got the error
    message:

    "Build failed during RPM installation"

    Details:
    Code:
    error: Failed dependencies:
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by aaa_base-11.2-43.46.1.jen1.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by bind-libs-9.6.1P3-1.1.1.jen1.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by coreutils-7.1-3.2.jen2.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by iproute2-2.6.29.1-6.3.jen2.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by kernel-rt-2.6.33.2-jen97.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by ksupport-jeng-2.6.33.2-jen97.noarch
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by net-tools-1.60-734.1.jen2.i586
    rpmlib(PayloadIsXz) <= 5.2-1 is needed by tar-1.21-4.2.jen2.i586
    While searching the web i found that this could be happen
    because the rpm-Package is to old. So is SUSEstudio using
    an old rpm-Package? Is there a way to build my appliance
    anyway?

  2. #2
    Join Date
    Jul 2008
    Location
    Seattle, WA
    Posts
    17,043

    Default Re: Build failed during RPM installation with kernel-rt

    On Fri, 23 Apr 2010 08:46:01 +0000, zwenny wrote:

    > While searching the web i found that this could be happen because the
    > rpm-Package is to old. So is SUSEstudio using an old rpm-Package? Is
    > there a way to build my appliance anyway?


    Even if you could force the build to run, chances are it wouldn't work -
    dependencies are there for a reason, so I'd look to resolve that issue.

    You might want to talk to the owner of the repository you're using, as it
    seems that they're not fulfilling the dependencies needed to build a
    system using their setup.

    Jim



    --
    Jim Henderson
    openSUSE Forums Administrator

  3. #3

    Default Re: Build failed during RPM installation with kernel-rt

    I just hit same wall a few minutes ago. Since I'm a linux lame , but still interested in music production in suse, I pinged a creator of the realtime kernel. I'll let you know IF he responds.

    Let me know if you found any workarounds in the meantime.
    Regards;
    a

  4. #4

    Default Re: Build failed during RPM installation with kernel-rt

    Very nice of you. I'll post it here as soon as i know how to get this working.

  5. #5

    Default Re: Build failed during RPM installation with kernel-rt

    Hey. I got the answer from Jan Engelhardt, who provided the rt kernel.

    "...you need rpm-4.7 from openSUSE 11.2"

    Well, I have it on my list of packages. Still unable to build the image...

  6. #6

    Default Re: Build failed during RPM installation with kernel-rt

    Some more detailed info:

    My rpm.rpm is xz-compressed (PayloadIsXz). You cannot install that if you do not already have an rpm that supports xz, which is why you need to move to SUSE 11.2's rpm.rpm first which is still PayloadIsBz2.

    I'm not really sure if one can do this via susestudio. His rpm.rpm is automatically selected with his kernel. Adding the original rpm has no effect.
    I hate to give up, but remixes can't wait and I'll have to play with it the other day. Anyone pls let me know of any workaround. Thanks!

  7. #7

    Default Re: Build failed during RPM installation with kernel-rt

    Hi there,

    On 04/23/2010 10:46 AM, zwenny wrote:
    > Hi, i'm trying to build an appliance with kernel-rt from
    > the j.eng repository to build an openSUSE based audio OS
    > for running on a notebook.
    > Everything is fine (there are no errors shown in RPM Selection)
    > until i try to build the appliance. Then i got the error
    > message:
    >
    > "Build failed during RPM installation"


    I can take a look if you give me the link to your appliance.

    Cheers,
    James Tan
    Studio Dev

  8. #8

    Default Re: Build failed during RPM installation with kernel-rt

    On 05/03/2010 11:36 PM, cellulit wrote:
    > I hate to give up, but remixes can't wait and I'll have to play with it
    > the other day. Anyone pls let me know of any workaround. Thanks!


    Similarly I can take a look at your appliance if you provide the
    appliance URL (eg. http://susestudio.com/appliance/edit/xxxx).

    In general for a openSUSE 11.2 appliance you just need to add kernel-rt
    and remove kernel-default in the software tab, and you're good to go.
    I've just tried that again to confirm that it works.

    Cheers,
    James Tan
    Studio Dev

  9. #9

    Question Re: Build failed during RPM installation with kernel-rt

    Quote Originally Posted by jatan11 View Post
    On 05/03/2010 11:36 PM, cellulit wrote:
    > I hate to give up, but remixes can't wait and I'll have to play with it
    > the other day. Anyone pls let me know of any workaround. Thanks!


    Similarly I can take a look at your appliance if you provide the
    appliance URL (eg. Sign in &ndash; SUSE Studio).

    In general for a openSUSE 11.2 appliance you just need to add kernel-rt
    and remove kernel-default in the software tab, and you're good to go.
    I've just tried that again to confirm that it works.

    Cheers,
    James Tan
    Studio Dev
    I think that was the fault:
    When you add kernel-rt, kernel-default is added, too.
    You need to ban all the other standard kernels
    (kernel-desktop, kernel-default, kernel-pae, kernel-debug).
    But why these kernels are added by default?
    Even though there is an info message:
    "It is not recommended to install more than one kernel".
    If you choose kernel-rt in YaST on an installed System
    these kernels are not chosen to be installed, too.

  10. #10

    Default Re: Build failed during RPM installation with kernel-rt

    On 05/06/2010 11:06 AM, zwenny wrote:
    > I think that was the fault: When you add kernel-rt, kernel-default is
    > added, too. You need to ban all the other standard kernels
    > (kernel-desktop, kernel-default, kernel-pae, kernel-debug). But why
    > these kernels are added by default? Even though there is an info
    > message: "It is not recommended to install more than one kernel". If
    > you choose kernel-rt in YaST on an installed System these kernels are
    > not chosen to be installed, too.


    No adding kernel-rt does not add any other kernels. One needs to remove
    kernel-default after adding kernel-rt because it is already there (it is
    the default kernel ;-)).

    One also does not need to ban the other kernels (desktop, default, pae,
    debug, etc).

    Cheers,
    James

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •