Results 1 to 8 of 8

Thread: Can burn DVDs but cannot mount them

  1. #1
    Join Date
    Jan 2010
    Location
    Montreal, Quebec
    Posts
    103

    Unhappy Can burn DVDs but cannot mount them

    Hello,

    I am able to burn DVDs with either Brasero or k3b, but opensuse then cannot mount them .

    Those DVDs do contain the burned data since I can see it and read it on a Mac...

    On openSUSE, I get the following error when inserting the DVD :



    I added my user to 'disk' and 'cdrom' groups, but to no avail.

    Here's the output from dmesg :

    Code:
    [275598.245976] Buffer I/O error on device sr0, logical block 0
    [275598.246011] Buffer I/O error on device sr0, logical block 1
    [275598.246039] Buffer I/O error on device sr0, logical block 2
    [275598.246065] Buffer I/O error on device sr0, logical block 3
    [275598.246091] Buffer I/O error on device sr0, logical block 4
    [275598.246117] Buffer I/O error on device sr0, logical block 5
    [275598.246154] Buffer I/O error on device sr0, logical block 6
    [275598.246180] Buffer I/O error on device sr0, logical block 7
    [275598.246206] Buffer I/O error on device sr0, logical block 8
    [275598.246232] Buffer I/O error on device sr0, logical block 9
    [276105.945033] ISO 9660 Extensions: Microsoft Joliet Level 3
    [276167.383424] ISO 9660 Extensions: Microsoft Joliet Level 3
    [276170.589536] ISO 9660 Extensions: Microsoft Joliet Level 3
    [276216.141607] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [276216.141648] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] 
    [276216.141682] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
    [276216.141715] end_request: I/O error, dev sr0, sector 0
    [276216.141742] __ratelimit: 22 callbacks suppressed
    [276216.141767] Buffer I/O error on device sr0, logical block 0
    [276216.143910] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [276216.143944] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] 
    [276216.143975] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
    [276216.144008] end_request: I/O error, dev sr0, sector 0
    [276216.144033] Buffer I/O error on device sr0, logical block 0
    [276216.169403] cdrom: This disc doesn't have any tracks I recognize!
    [276216.226117] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [276216.226133] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] 
    [276216.226142] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
    [276216.226151] end_request: I/O error, dev sr0, sector 0
    [276216.226159] Buffer I/O error on device sr0, logical block 0
    [276216.227566] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [276216.227576] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] 
    [276216.227585] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
    [276216.227593] end_request: I/O error, dev sr0, sector 0
    [276216.227600] Buffer I/O error on device sr0, logical block 0
    [276790.609380] ISO 9660 Extensions: Microsoft Joliet Level 3
    [277233.224373] ISO 9660 Extensions: Microsoft Joliet Level 3
    [277253.801169] ISO 9660 Extensions: Microsoft Joliet Level 3
    [277831.155852] ISO 9660 Extensions: Microsoft Joliet Level 3
    [277953.164179] ISO 9660 Extensions: Microsoft Joliet Level 3
    What could the problem be? Thanks for helping me solve it...

  2. #2
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    20,579
    Blog Entries
    1

    Default Re: Can burn DVDs but cannot mount them

    Without pretending to know the definitive answer, what is the output of

    /usr/sbin/hwinfo --cdrom

    In particular, the driver info may be relevant here.

    A thread which may or may not be relevant:

    FS#11652 : DVDs can't be mounted with IDE drives and HOOK pata

    Hopefully, someone else can offer further support with this...

  3. #3
    Join Date
    Jan 2010
    Location
    Montreal, Quebec
    Posts
    103

    Default Re: Can burn DVDs but cannot mount them

    Quote Originally Posted by deano_ferrari View Post
    Without pretending to know the definitive answer, what is the output of

    /usr/sbin/hwinfo --cdrom

    In particular, the driver info may be relevant here.
    There it is :

    Code:
    28: SCSI 400.0: 10602 CD-ROM (DVD)                              
      [Created at block.247]
      UDI: /org/freedesktop/Hal/devices/storage_model_DVD_RW__DVR_118L
      Unique ID: KD9E.swV7UB_oqN2
      Parent ID: Eu86.2W9rRjjY4f3
      SysFS ID: /class/block/sr0
      SysFS BusID: 4:0:0:0
      SysFS Device Link: /devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0
      Hardware Class: cdrom
      Model: "PIONEER DVD-RW  DVR-118L"
      Vendor: "PIONEER"
      Device: "DVD-RW  DVR-118L"
      Revision: "1.00"
      Driver: "pata_atiixp", "sr"
      Driver Modules: "pata_atiixp"
      Device File: /dev/sr0 (/dev/sg1)
      Device Files: /dev/sr0, /dev/block/11:0, /dev/scd0, /dev/disk/by-path/pci-0000:00:14.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw
      Device Number: block 11:0 (char 21:1)
      Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+DL, DVDRAM
      Drive status: no medium
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #13 (IDE interface)
      Drive Speed: 40
    Quote Originally Posted by deano_ferrari View Post
    A thread which may or may not be relevant:

    FS#11652 : DVDs can't be mounted with IDE drives and HOOK pata

    Hopefully, someone else can offer further support with this...
    Since I can, in general, mount other DVDs successfully, do you think the settings used when burning a DVD are somehow wrong? I used the default settings provided by Brasero or k3b.

    Thanks,

  4. #4
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    20,579
    Blog Entries
    1

    Default Re: Can burn DVDs but cannot mount them

    Could well be the problem. I would try using an alternative dvd burn utility like dvdrecord or dvd+rw-format to check.

    How To: Burn DVD's from the command line | Debian/Ubuntu Tips & Tricks

  5. #5
    Join Date
    Jan 2010
    Location
    Montreal, Quebec
    Posts
    103

    Default Re: Can burn DVDs but cannot mount them

    I found a solution, at least for CD-RW. Will have to test on DVD-R, and hopefully it will work as well.

    Instead of choosing 'Linux/Unix + Windows' as the File System in k3b, I now choose 'Linux/Unix' and the burned CD is then mounted correctly (and oddly enough, readable on Mac and Windows ).

    So for some reason, the default setting for Brasero seems to be 'Linux/Unix + Windows' as well, or something similar. That's quite unexpected. A newbie like me expects to be able to read a DVD that has freshly been burned!

    Thanks for your support,
    Ben

  6. #6
    Join Date
    Jun 2008
    Location
    Berlin
    Posts
    2,061

    Default Re: Can burn DVDs but cannot mount them

    You should report that behaviour to the K3B-team - seems like a bug to me.

  7. #7
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: Can burn DVDs but cannot mount them

    Quote Originally Posted by oysterboy View Post
    I found a solution, at least for CD-RW. Will have to test on DVD-R, and hopefully it will work as well.

    Instead of choosing 'Linux/Unix + Windows' as the File System in k3b, I now choose 'Linux/Unix' and the burned CD is then mounted correctly (and oddly enough, readable on Mac and Windows ).

    So for some reason, the default setting for Brasero seems to be 'Linux/Unix + Windows' as well, or something similar. That's quite unexpected. A newbie like me expects to be able to read a DVD that has freshly been burned!

    Thanks for your support,
    Ben
    That's really weird. Linux/Unix + Windows has always worked for me. The Windows part only consists of Joliet support and doesn't affect the Linux/Unix Rock Ridge support, they are independent. Without Windows support, you still have the native ISO9660 directory information, so the CD/DVD is still readable by Windows, just that you may not see the filename as intended. Something similar to DOS 8.3 shortnames I believe. See the man page for cdrecord for these terms. Sorry I don't have an explanation for your weird result.

  8. #8
    Join Date
    Jul 2008
    Location
    Santa Cruz, CA
    Posts
    255

    Default Re: Can burn DVDs but cannot mount them

    I just downloaded the 11.3 ISO image, burned it and have this very problem. Selecting the burning tool won't help because the layout is already in the .iso image. I've check summed the image and validated the burned disk. No joy. I can loop mount the image, I just cannot mount the physical disk. It is the mount code.
    Jul 15 14:26:46 bkorb-dt kernel: loop: loaded (max 8 devices)
    Jul 15 14:27:25 bkorb-dt kernel: attempt to access beyond end of device
    Jul 15 14:27:25 bkorb-dt kernel: sr0: rw=0, want=68, limit=4
    Jul 15 14:27:25 bkorb-dt kernel: isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
    Jul 15 14:48:03 bkorb-dt kernel: attempt to access beyond end of device
    Jul 15 14:48:03 bkorb-dt kernel: sr0: rw=0, want=68, limit=4
    Jul 15 14:48:03 bkorb-dt kernel: attempt to access beyond end of device
    ......
    Jul 15 14:51:17 bkorb-dt kernel: sr0: rw=0, want=68, limit=4
    Jul 15 14:51:17 bkorb-dt kernel: isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
    Jul 15 14:55:35 bkorb-dt kernel: sr0: CDROM not ready. Make sure there is a disc in the drive.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •