Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: SuSE 11.2 & K3B burning Problems

  1. #1

    Default SuSE 11.2 & K3B burning Problems

    Having problems with K3B burning data and ISO files.

    Can someone please help me with this.

    Disc Media: Datawrite DVD & CD Discs


    Old Box

    OS: WinXP Pro SP3 32bit
    Burning Software: Nero 7.0.1.4

    Mobo: Asrock P4V88+
    Processor: AMD AthlonXP 2800+ Single Core CPU
    Memory: 2GB DDR
    Optical Drive: NEC DVD RW ND-4550A (2x, 4x & 8x write speeds)



    New Box

    OS: SuSE Linux 11.2 64bit
    Burning Software: K3B 1.0.5 using KDE 3.5.10 release 32

    Mobo: Gigabyte GA-MA770T-UD3P
    Processor: AMD Phenom II X4 965 SKT AM3 Quad Core
    Memory: 8GB DDR3 PC3-1200 1600HHZ
    Optical Drive: LG GH22LS50 (4x & 8x write speeds)


    My Current / Old box (WinXP)can burn 2.9GB of data over a LAN from a mapped drive using Nero in 7 minutes and maintain file & directory names as they are complete with upper and lower characters, spaces between words and special characters without shortening file / directory names out of the box.

    My new box (SuSE 11.2) was initially incapable of burning anything, Access Denied I added the user to the cdrom group this allowed the burning of data but the process changed file and directory names. It changed all letters to capitols, replaced blank spaces and special characters with underscores. I still cant burn ISO files, Access Denied. The time it took to burn the 2.9GB of data on the hard drive of the SuSE install was sort of acceptable but a full 5 to 6 minutes longer and I was forced to shorten file names too.

    I changed a setting to allow the full ascii character set hoping this would preserve file and directory names as they are during the burn process. I changed a setting to allow long file names too.

    I now have another problem, on starting the burn process and after a minute'sh K3B displayed the fact that it was going to take over 1 hours to finish! Yikes. After an hour it was going to take a further 2hrs and 10mins. This didn't include read varify.

    I aborted the burn process, this cant be correct.

    I placed the LG drive in my old box, burn process took a second or two less than 7mins to complete using the same data over the same LAN. I've tested the drive for hardware errors, the drive is perfect.

    Am i missing something, failing to do something or doing things wrong. Is the optical drive or some other component incompatible in some way.

    I'll be burning many gigabytes of data on a daily basis and i'm hoping to be able to burn a full DVD disc of mixed data types in less than 10mins whilst preserving the full ascii character set, file & directory names inc special characters and blank spaces. I still need to resolve my "access denied" problem when trying to burn ISO files too.

    Hoping somebody can help me here.

    Mark

  2. #2
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: SuSE 11.2 & K3B burning Problems

    Sorry not much help, but the k3b 1.69 that goes with the stock KDE4 works just fine. Do you have to use KDE3.5?

  3. #3

    Default Re: SuSE 11.2 & K3B burning Problems

    Hi,

    Thank you for your response.

    "Do you have to use KDE3.5? "

    No idea, forgive me, KDE 3.5 was installed by default. Whatever i do here must not change anything regarding the running of Apache2, Sshd, VSftpd and the Samba servers or Dazukofs or Avira Antivir.

    I ask that i am treated as a complete beginer with this although i have had a SuSE box for several years running a number of servers i have never really used Linux as a daily user at all whatsoever.

    Mark

  4. #4
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: SuSE 11.2 & K3B burning Problems

    To get KDE3.5 with 11.2 you would have had to specially install it yourself. The default KDE that comes with 11.2 is KDE4. Are you sure you don't really have KDE4?

  5. #5

    Default Re: SuSE 11.2 & K3B burning Problems

    How do i find out?

    I only know what K3B tells me when i click on Help > About KDE or Help > About K3B.

    SuSE 11.2 64bit was downloaded from the OpenSuSE website roughly 3 weeks ago.

    Mark

  6. #6

    Default Re: SuSE 11.2 & K3B burning Problems

    If i open Help from the start menu and click help > about KDE i get KDE 4.3.1 release 6

  7. #7
    Join Date
    Jun 2008
    Posts
    1,825
    Blog Entries
    1

    Default Re: SuSE 11.2 & K3B burning Problems

    I would recommend the K3B from packman. PackMan :: Search results

    See this for adding the packman repo if you don't already have it. Repositories/Packman - openSUSE-Community

    Read this Zypper/Usage/11.2 - openSUSE to learn how to use zypper.
    You can also use YaST YaST/Modules/Software Repositories - openSUSE and YaST/Modules/Software Management - openSUSE

    If you have more questions, please don't hesitate to ask.
    ______________________________________________________________________________________
    Don't ask "if" something can be done, for it can always be done. Rather instead ask "How" can it be done.

  8. #8

    Default Re: SuSE 11.2 & K3B burning Problems

    Thank you for all your help thus far.

    Downloaded K3B and it installed with an error, "k3b -arts could not be installed. However i now have a different version of KDE when i use K3B now.

    tried to burn a data DVD disc, i quickly get:

    "cdrecord has no permission to open the drive"

    with the following debug info

    Devices
    -----------------------
    HL-DT-ST DVDRAM GH22LS50 TL01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

    K3b::IsoImager
    -----------------------
    mkisofs print size result: 1511531 (3095615488 bytes)

    System
    -----------------------
    K3b Version: 1.69.0
    KDE Version: 4.3.1 (KDE 4.3.1) "release 6"
    QT Version: 4.5.3
    Kernel: 2.6.31.5-0.1-desktop

    Used versions
    -----------------------
    mkisofs: 1.1.9
    cdrecord: 1.1.9

    cdrecord
    -----------------------
    /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.9
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 1 = CD-ROM
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'HL-DT-ST'
    Identification : 'DVDRAM GH22LS50 '
    Revision : 'TL01'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x001B (DVD+R)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x001A (DVD+RW)
    Profile: 0x001B (DVD+R) (current)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x0009 (CD-R)
    Profile: 0x000A (CD-RW)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
    Driver flags : SWABAUDIO BURNFREE
    Supported modes: PACKET SAO
    Drive buf size : 1048576 = 1024 KB
    Drive DMA Speed: 16712 kB/s 94x CD 12x DVD
    FIFO size : 4194304 = 4096 KB
    Speed set to 11080 KB/s
    Track 01: data 2952 MB
    Total size: 3390 MB (335:53.74) = 1511531 sectors
    Lout start: 3390 MB (335:55/56) = 1511531 sectors
    Current Secsize: 2048
    HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
    Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 783573
    Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
    1 seconds.
    0 seconds.
    Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Sending CUE sheet...
    Starting new track at sector: 0
    Track 01: 0 of 2952 MB written.
    Track 01: 1 of 2952 MB written (fifo 100%) [buf 99%] 0.2x.
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 02 2E 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0E 21 02 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.132s timeout 200s
    /usr/bin/wodim: The current problem looks like a buffer underrun.
    /usr/bin/wodim: Try to use 'driveropts=burnfree'.
    /usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
    write track data: error after 1142784 bytes
    Writing time: 26.095s
    Average write speed 111.0x.
    Min drive buffer fill was 99%
    Fixating...
    Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
    CDB: 5B 00 02 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 5B 35 30 0E 72 03 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in session) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.590s timeout 1000s
    Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
    CDB: 35 00 00 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 35 72 03 0E A0 80 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0xA0 Qual 0x80 (vendor unique sense code 0xA0) [No matching qualifier] Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.006s timeout 1000s
    Trouble flushing the cache
    Fixating time: 0.609s
    /usr/bin/wodim: fifo had 82 puts and 19 gets.
    /usr/bin/wodim: fifo was 0 times empty and 4 times full, min fill was 90%.

    cdrecord command:
    -----------------------
    /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=1511531s -

    mkisofs
    -----------------------
    Warning: creating filesystem that does not conform to ISO-9660.
    1511531
    Warning: creating filesystem that does not conform to ISO-9660.
    Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
    I: -input-charset not specified, using utf-8 (detected in locale settings)
    Using ABBEY - MAKE A PAYMENT RECEIPT000.URL for Beaty/Favorites/Abbey - Make a Payment receipt M&S.url (Abbey - Make a Payment receipt M&S Nov.url)
    Using ABBEY - MAKE A PAYMENT RECEIPT001.URL for Beaty/Favorites/Abbey - Make a Payment receipt debs.url (Abbey - Make a Payment receipt Debs Nov.url)
    Using MARKS AND SPENCER CHECKOUT THA000.URL for Beaty/Favorites/Links/Marks and Spencer Checkout Thank You.url (Marks and Spencer Checkout Thank You (2).url)
    Using NETGEAR FORUMS VIEW TOPIC - D000.URL for Beaty/Favorites/Router topics/Netgear Forums View topic - DG834G Signal drops - drops connection.url (Netgear Forums View topic - DG834G Reboots spontaneously.url)
    Using XVIDEOS_COM - MOTHER ****S HER000.FLV for Beaty/My Documents/My Videos/RealPlayer Downloads/XVIDEOS.COM - Mother ****s Her Sons Best Friend - XVIDEOS3.flv (XVIDEOS.COM - Mother ****s Her Sons Best Friend - XVIDEOS2.flv)
    Using XVIDEOS_COM - MOTHER ****S HER001.FLV for Beaty/My Documents/My Videos/RealPlayer Downloads/XVIDEOS.COM - Mother ****s Her Sons Best Friend - XVIDEOS2.flv (XVIDEOS.COM - Mother ****s Her Sons Best Friend - XVIDEOS.flv)
    0.03% done, estimate finish Mon Jan 4 22:59:02 2010
    0.07% done, estimate finish Mon Jan 4 22:34:56 2010
    0.10% done, estimate finish Mon Jan 4 22:26:24 2010
    0.13% done, estimate finish Mon Jan 4 22:22:17 2010
    0.17% done, estimate finish Tue Jan 5 01:41:01 2010

    mkisofs calculate size command:
    -----------------------
    /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Beaty -volset -appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-akwe-xavante/k3bE27413.tmp -rational-rock -hide-list /tmp/kde-akwe-xavante/k3bV27413.tmp -no-cache-inodes -full-iso9660-filenames -relaxed-filenames -max-iso9660-filenames -disable-deep-relocation -iso-level 3 -path-list /tmp/kde-akwe-xavante/k3bY27413.tmp

    mkisofs command:
    -----------------------
    /usr/bin/genisoimage -gui -graft-points -volid Beaty -volset -appid K3B THE CD KREATOR (C) 1998-2009 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-akwe-xavante/k3bo27413.tmp -rational-rock -hide-list /tmp/kde-akwe-xavante/k3bB27413.tmp -no-cache-inodes -full-iso9660-filenames -relaxed-filenames -max-iso9660-filenames -disable-deep-relocation -iso-level 3 -path-list /tmp/kde-akwe-xavante/k3bE27413.tmp

  9. #9

    Default Re: SuSE 11.2 & K3B burning Problems

    Please note the data being burned is not my data but the data belonging to a customer.

    Just noticed the rather dodgy files listed for burning!!!!!!!!!!!!!!

  10. #10

    Default Re: SuSE 11.2 & K3B burning Problems

    Burn process started at approx 22:10

    Note the expected finish time of 01:41!!!!!!!!!!

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •