Results 1 to 4 of 4

Thread: PHP scripts in HTML not working

  1. #1

    Default PHP scripts in HTML not working

    I originaly had a custom installation of Apache which i compiled from source when I set the server up. Recently I needed to add PHP capablitites. I had forgotten that I compiled Apache and installed PHP using YAST.

    When i could not get PHP working i relized I had installed Apache and PHP differently so I used YAST to uninstall PHP and some other appplications I had installed at the same time and deleted the Apachee2 folder, httpd.conf file and the htdocs folder.

    I then used YAST to install Apache and PHP5 at the same time. I haave tried this a couple of times and I still can not get PHP scripts to run.


    I would apppreicate any suggestions

    Below is a copy of my httpd.conf file

    #
    # /etc/apache2/httpd.conf
    #
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
    # the directives.

    # Based upon the default apache configuration file that ships with apache,
    # which is based upon the NCSA server configuration files originally by Rob
    # McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

    # If possible, avoid changes to this file. It does mainly contain Include
    # statements and global settings that can/should be overridden in the
    # configuration of your virtual hosts.

    # Quickstart guide:
    # http://www.opensuse.org/Apache_Howto_Quickstart


    # Overview of include files, chronologically:
    #
    # httpd.conf
    # |
    # |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
    # |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
    # |-- sysconfig.d/loadmodule.conf . . . . .[*] load these modules
    # |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
    # |-- mod_log_config.conf . . . . . . . . . define logging formats
    # |-- sysconfig.d/global.conf . . . . . . .[*] server-wide general settings
    # |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
    # |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
    # |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user tracking
    # |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
    # |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
    # |-- errors.conf . . . . . . . . . . . . . customize error responses
    # |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
    # |
    # |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
    # | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
    # | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
    # |
    # |-- sysconfig.d/include.conf . . . . . .[*] your include files
    # | (for each file to be included here, put its name
    # | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
    # |
    # `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
    # `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
    #
    #
    # Files marked[*] are created from sysconfig upon server restart: instead of
    # these files, you edit /etc/sysconfig/apache2



    # Filesystem layout:
    #
    # /etc/apache2/
    # |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
    # |-- conf.d/
    # | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
    # | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
    # | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
    # |-- default-server.conf
    # |-- errors.conf
    # |-- httpd.conf . . . . . . . . . . . . . top level configuration file
    # |-- listen.conf
    # |-- magic
    # |-- mime.types -> ../mime.types
    # |-- mod_autoindex-defaults.conf
    # |-- mod_info.conf
    # |-- mod_log_config.conf
    # |-- mod_mime-defaults.conf
    # |-- mod_perl-startup.pl
    # |-- mod_status.conf
    # |-- mod_userdir.conf
    # |-- mod_usertrack.conf
    # |-- server-tuning.conf
    # |-- ssl-global.conf
    # |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
    # |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
    # |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
    # |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
    # |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
    # |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
    # | |-- global.conf
    # | |-- include.conf
    # | `-- loadmodule.conf
    # |-- uid.conf
    # `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
    # |-- vhost-ssl.template
    # `-- vhost.template



    ### Global Environment ######################################################
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests.

    # run under this user/group id
    Include /etc/apache2/uid.conf

    # - how many server processes to start (server pool regulation)
    # - usage of KeepAlive
    Include /etc/apache2/server-tuning.conf

    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog /var/log/apache2/error_log

    # generated from APACHE_MODULES in /etc/sysconfig/apache2
    Include /etc/apache2/sysconfig.d/loadmodule.conf

    # IP addresses / ports to listen on
    Include /etc/apache2/listen.conf

    # predefined logging formats
    Include /etc/apache2/mod_log_config.conf

    # generated from global settings in /etc/sysconfig/apache2
    Include /etc/apache2/sysconfig.d/global.conf

    # optional mod_status, mod_info
    Include /etc/apache2/mod_status.conf
    Include /etc/apache2/mod_info.conf

    # optional cookie-based user tracking
    # read the documentation before using it!!
    Include /etc/apache2/mod_usertrack.conf

    # configuration of server-generated directory listings
    Include /etc/apache2/mod_autoindex-defaults.conf

    # associate MIME types with filename extensions
    TypesConfig /etc/apache2/mime.types
    DefaultType text/plain
    Include /etc/apache2/mod_mime-defaults.conf

    # set up (customizable) error responses
    Include /etc/apache2/errors.conf

    # global (server-wide) SSL configuration, that is not specific to
    # any virtual host
    Include /etc/apache2/ssl-global.conf

    # forbid access to the entire filesystem by default
    <Directory />
    Options None
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>

    # use .htaccess files for overriding,
    AccessFileName .htaccess
    # and never show them
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>

    # List of resources to look for when the client requests a directory
    DirectoryIndex index.html index.html.var index.php index.php5 index.php4 index.php3

    ### 'Main' server configuration #############################################
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    Include /etc/apache2/default-server.conf


    # Another way to include your own files
    #
    # The file below is generated from /etc/sysconfig/apache2,
    # include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
    # APACHE_CONF_INCLUDE_DIRS
    Include /etc/apache2/sysconfig.d/include.conf


    ### Virtual server configuration ############################################
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    #
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs-2.2/vhosts/>
    # for further details before you try to setup virtual hosts.
    #
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    #
    Include /etc/apache2/vhosts.d/*.conf


    # Note: instead of adding your own configuration here, consider
    # adding it in your own file (/etc/apache2/httpd.conf.local)
    # putting its name into APACHE_CONF_INCLUDE_FILES in
    # /etc/sysconfig/apache2 -- this will make system updates
    # easier


    Here is the page (test.html) i am trying to load

    <html><body><h1>It works! whoopie!!</h1><p> <?php echo '<p>Hello World</p>'; ?> </p><p> <?php
    echo $_SERVER['HTTP_USER_AGENT'];
    ?>
    </p>
    well?
    </body></html>


    Output from page

    It works! whoopie!!

    Hello World
    '; ?>

    well?

  2. #2
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: PHP scripts in HTML not working

    To be recognised as a PHP script by Apache, the filename has to end in .php. Also it goes without saying that you should access it through the web server, not directly.

  3. #3

    Default Re: PHP scripts in HTML not working

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Yes, unless there is a handler to have PHP parse .html files, which may be
    possible (doubtful). Rename your file to .php. Also it may useful to see
    what you have in /etc/apache2/sysconfig.d/loadmodule.conf to ensure PHP is
    loaded in there.

    Good luck.




    ken yap wrote:
    > To be recognised as a PHP script by Apache, the filename has to end in
    > .php. Also it goes without saying that you should access it through the
    > web server, not directly.
    >
    >

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v2.0.9 (GNU/Linux)
    Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

    iQIcBAEBAgAGBQJLMZ0kAAoJEF+XTK08PnB5wQ0P/2BHwGt+bCKZY6NYiKPpn2l9
    /gJ1gqL5zzEDRby8cmeNC0cJcAYcInXG2k0CqbCmw4qYFaLk5KSL5G8vc79PnaF/
    emKrklFaLwwAIzRz/R0sCn24jIBbaO5bHQvYwMphq/VgscSGZXn3OOnkM3MsU1Hz
    xo28nd3/pHsFzeWGKB0Y6TI7OW3kvYxeHRKVd6oXsO6fqqX2heZSSDRBpMrk3/5X
    JgdV1hDQY9zTTPB2IYkPqINaxvEOKmHhhB7/Rw3HllDR+1SDnNoo7/lIbQqcsJib
    gq7c9SmhD/5BQd/7VAQM11pGZJZ27Es2z5sdS8AzFWA0mF61c12OlsFjCv1femKp
    NbjXSdojuY+aZff1zbcJ2vpx9EuSC3/yNRZPYIV4PH4eskFRm48jyqXYZr+5Af/O
    dZQAcCjUhUp4qFM9D6j7Hv8V83zDoUFu3oRhCovJzq2WGgnn0zmrwXjFT/TqPTNn
    NCrdTu7W/fFpF9fAf0CoymfspgldAIJo/4bEm6sz7ALt9twY8i04Vbud5P7xJdE/
    /PMrq1o0iyNx/SLU1POCEUmtrPyndBWv5CPF688s6VaBc+H/NlxEMA4jOin1GnxU
    nFALFE4bL+34cb0orEpGIbtw3k3olD88ypJJbvY63wYixMbIRt1T/ZNUOESI8YUE
    WPUCIohtZmTVnJCbzByK
    =X9MJ
    -----END PGP SIGNATURE-----

  4. #4

    Default Re: PHP scripts in HTML not working

    Thanks. That was the issue. I renamed the test file test.php and it worked. I guess it has been longer than I realized since I did any PHP.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •