Everytime I start Kmail, Akonadi tries to start a server and it fails (I removed the first 5 tests that were correct because otherwise this post would be to long).

This is the report it gives:
Code:
Akonadi Server Self-Test Report
===============================


Test 6:  SUCCESS
--------

MySQL server custom configuration found.
Details: The custom configuration for the MySQL server was found and is readable at <a href='/home/ikkefc3/.config/akonadi/mysql-local.conf'>/home/ikkefc3/.config/akonadi/mysql-local.conf</a>

File content of '/home/ikkefc3/.config/akonadi/mysql-local.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
skip_grant_tables
skip_networking

# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
#sql_mode=strict_trans_tables

# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# case-insensitive table names, avoids trouble on windows
lower_case_table_names=1
character_set_server=latin1
collation_server=latin1_general_ci
table_cache=200
thread_cache_size=3
log_bin=mysql-bin
expire_logs_days=3
#sync_bin_log=0
# error log file name, relative to datadir
log_error=mysql.err
log_warnings=2
# log all queries, useful for debugging but generates an enormous amount of data
#log=mysql.full
# log queries slower than n seconds, log file name relative to datadir
log_slow_queries=mysql.slow
long_query_time=1
# log queries not using indices, debug only, disable for production use
log_queries_not_using_indexes=1
# maximum blob size
max_allowed_packet=32M
max_connections=256
# makes sense when having the same query multiple times
# makes no sense with prepared statements and/or transactions
query_cache_type=0
query_cache_size=0

innodb_file_per_table=1
innodb_log_buffer_size=1M
innodb_additional_mem_pool_size=1M
# messure database size and adjust
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
innodb_buffer_pool_size=80M
# size of average write burst, keep Innob_log_waits small, keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
innodb_log_file_size=64M
innodb_flush_log_at_trx_commit=2



Test 7:  SUCCESS
--------

MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/ikkefc3/.local/share/akonadi/mysql.conf'>/home/ikkefc3/.local/share/akonadi/mysql.conf</a> and is readable.

File content of '/home/ikkefc3/.local/share/akonadi/mysql.conf':
#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
skip_grant_tables
skip_networking

# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
#sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
#sql_mode=strict_trans_tables

# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# case-insensitive table names, avoids trouble on windows
lower_case_table_names=1
character_set_server=latin1
collation_server=latin1_general_ci
table_cache=200
thread_cache_size=3
log_bin=mysql-bin
expire_logs_days=3
#sync_bin_log=0
# error log file name, relative to datadir
log_error=mysql.err
log_warnings=2
# log all queries, useful for debugging but generates an enormous amount of data
#log=mysql.full
# log queries slower than n seconds, log file name relative to datadir
log_slow_queries=mysql.slow
long_query_time=1
# log queries not using indices, debug only, disable for production use
log_queries_not_using_indexes=1
# maximum blob size
max_allowed_packet=32M
max_connections=256
# makes sense when having the same query multiple times
# makes no sense with prepared statements and/or transactions
query_cache_type=0
query_cache_size=0

innodb_file_per_table=1
innodb_log_buffer_size=1M
innodb_additional_mem_pool_size=1M
# messure database size and adjust
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
innodb_buffer_pool_size=80M
# size of average write burst, keep Innob_log_waits small, keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
innodb_log_file_size=64M
innodb_flush_log_at_trx_commit=2

#
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
#
# Based on advice by Kris Köhntopp <kris@mysql.com>
#
[mysqld]
skip_grant_tables
skip_networking

# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
#sql_mode=strict_trans_tables

# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# case-insensitive table names, avoids trouble on windows
lower_case_table_names=1
character_set_server=latin1
collation_server=latin1_general_ci
table_cache=200
thread_cache_size=3
log_bin=mysql-bin
expire_logs_days=3
#sync_bin_log=0
# error log file name, relative to datadir
log_error=mysql.err
log_warnings=2
# log all queries, useful for debugging but generates an enormous amount of data
#log=mysql.full
# log queries slower than n seconds, log file name relative to datadir
log_slow_queries=mysql.slow
long_query_time=1
# log queries not using indices, debug only, disable for production use
log_queries_not_using_indexes=1
# maximum blob size
max_allowed_packet=32M
max_connections=256
# makes sense when having the same query multiple times
# makes no sense with prepared statements and/or transactions
query_cache_type=0
query_cache_size=0

innodb_file_per_table=1
innodb_log_buffer_size=1M
innodb_additional_mem_pool_size=1M
# messure database size and adjust
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
innodb_buffer_pool_size=80M
# size of average write burst, keep Innob_log_waits small, keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
innodb_log_file_size=64M
innodb_flush_log_at_trx_commit=2



Test 8:  SUCCESS
--------

akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.2.61


Test 9:  ERROR
--------

Akonadi control process not registered at D-Bus.
Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 10:  ERROR
--------

Akonadi server process not registered at D-Bus.
Details: The Akonadi server process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup.

Test 11:  SUCCESS
--------

Nepomuk search service registered at D-Bus.
Details: The Nepomuk search service is registered at D-Bus which typically indicates it is operational.

Test 12:  ERROR
--------

Nepomuk search service uses inappropriate backend.
Details: The Nepomuk search service uses the 'virtuosobackend' backend, which is not recommended for use with Akonadi.

Test 13:  SKIP
--------

Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.

Test 14:  ERROR
--------

No resource agents found.
Details: No resource agents have been found, Akonadi is not usable without at least one. This usually means that no resource agents are installed or that there is a setup problem. The following paths have been searched: '/usr/share/akonadi/agents'. The XDG_DATA_DIRS environment variable is set to '/usr/share', make sure this includes all paths where Akonadi agents are installed to.

Directory listing of '/usr/share/akonadi/agents':
nepomukemailfeeder.desktop

Environment variable XDG_DATA_DIRS is set to '/usr/share'

Test 15:  ERROR
--------

Current Akonadi server error log found.
Details: The Akonadi server did report error during startup into <a href='/home/ikkefc3/.local/share/akonadi/akonadiserver.error'>/home/ikkefc3/.local/share/akonadi/akonadiserver.error</a>.

File content of '/home/ikkefc3/.local/share/akonadi/akonadiserver.error':
"[
0: akonadiserver(_Z11akBacktracev+0x39) [0x40b869]
1: akonadiserver [0x40bdb2]
2: /lib64/libc.so.6 [0x7f1d441af560]
3: /lib64/libc.so.6(gsignal+0x35) [0x7f1d441af4e5]
4: /lib64/libc.so.6(abort+0x180) [0x7f1d441b09b0]
5: /usr/lib64/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x74) [0x7f1d4535f404]
6: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xa8) [0x40cda8]
7: /usr/lib64/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x78) [0x7f1d453eddb8]
8: /usr/lib64/libQtCore.so.4 [0x7f1d453ff0a9]
9: /usr/lib64/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7f1d454001fb]
10: /usr/lib64/libakonadiprivate.so.1(_ZN6QDebugD1Ev+0x4e) [0x7f1d457bbb5e]
11: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0x178a) [0x7f1d457c323a]
12: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServerC1EP7QObject+0x69) [0x7f1d457c57f9]
13: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer8instanceEv+0x4a) [0x7f1d457c6aea]
14: akonadiserver(main+0x3a4) [0x406424]
15: /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f1d4419ba7d]
16: akonadiserver [0x405f89]
]
" 


Test 16:  ERROR
--------

Previous Akonadi server error log found.
Details: The Akonadi server did report error during its previous startup into <a href='/home/ikkefc3/.local/share/akonadi/akonadiserver.error.old'>/home/ikkefc3/.local/share/akonadi/akonadiserver.error.old</a>.

File content of '/home/ikkefc3/.local/share/akonadi/akonadiserver.error.old':
"[
0: akonadiserver(_Z11akBacktracev+0x39) [0x40b869]
1: akonadiserver [0x40bdb2]
2: /lib64/libc.so.6 [0x7fbd797b0560]
3: /lib64/libc.so.6(gsignal+0x35) [0x7fbd797b04e5]
4: /lib64/libc.so.6(abort+0x180) [0x7fbd797b19b0]
5: /usr/lib64/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x74) [0x7fbd7a960404]
6: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xa8) [0x40cda8]
7: /usr/lib64/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x78) [0x7fbd7a9eedb8]
8: /usr/lib64/libQtCore.so.4 [0x7fbd7aa000a9]
9: /usr/lib64/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3b) [0x7fbd7aa011fb]
10: /usr/lib64/libakonadiprivate.so.1(_ZN6QDebugD1Ev+0x4e) [0x7fbd7adbcb5e]
11: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0x178a) [0x7fbd7adc423a]
12: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServerC1EP7QObject+0x69) [0x7fbd7adc67f9]
13: /usr/lib64/libakonadiprivate.so.1(_ZN7Akonadi13AkonadiServer8instanceEv+0x4a) [0x7fbd7adc7aea]
14: akonadiserver(main+0x3a4) [0x406424]
15: /lib64/libc.so.6(__libc_start_main+0xfd) [0x7fbd7979ca7d]
16: akonadiserver [0x405f89]
]
" 


Test 17:  SUCCESS
--------

No current Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its current startup.

Test 18:  SUCCESS
--------

No previous Akonadi control error log found.
Details: The Akonadi control process did not report any errors during its previous startup.
What can I do to let it start correctly, or is there a way to disable Akonadi? It's very annoying that every time I start Kmail, Akonadi attempts to start.