Results 1 to 5 of 5

Thread: help to connect via putty

  1. #1
    azegurb NNTP User

    Default help to connect via putty

    hi, all
    i have installed SuSe linux into VMware (as virtual OS)
    i have set up network card IP to 192.168.1.50 in Linux
    then i gave the same IP to VMWare virtual machine adapter
    and then i opened putty, wrote IP address which i gave but it displayed error (fatal error)
    can you help me to solve this problem
    thank you beforehands

  2. #2
    Vahis NNTP User

    Default Re: help to connect via putty

    azegurb wrote:
    > hi, all
    > i have installed SuSe linux into VMware (as virtual OS)
    > i have set up network card IP to 192.168.1.50 in Linux
    > then i gave the same IP to VMWare virtual machine adapter
    > and then i opened putty, wrote IP address which i gave but it displayed
    > error (fatal error)
    > can you help me to solve this problem
    > thank you beforehands
    >
    >


    If I understand what you are saying it means that you have two machines
    (the host and the guest) with identical IP in your subnet. That can't work.

    Where are you trying to connect from?
    Where are you trying to connect to?
    Between Linux you don't need PuTTy, that's an ssh client and in Linux
    ssh is built in. You use command line to connect.

    In vmware you set the guest OS networking either bridged or nat.
    Which is it?

    Vahis
    --
    "Sunrise 7:52am (EEST), sunset 6:21pm (EEST) at Espoo, Finland (10:28
    hours daylight)"
    http://waxborg.servepics.com
    Linux 2.6.25.20-0.5-default #1 SMP 2009-08-14 01:48:11 +0200 x86_64
    10:54am up 19 days 17:34, 14 users, load average: 5.45, 4.49, 3.70

  3. #3

    Default Re: help to connect via putty

    I can not be sure about the general installation and setup regarding VMware with OpenSUSE as a virtual machine (for that you should anser Vahis questions) but regarding the connection "via putty" you should check also if sshd service is running and if the port is opened:

    1. is sshd service running

    Code:
    su rcsshd status
    also in YaST / Network Services / SSHD Server : YaST/Modules/SSHD Server - openSUSE

    2. is the sshd port (usually 22) opened in the suse firewall (from YaST / Security and users / Firewall ): YaST/Modules/Firewall - openSUSE

    Cheers.

  4. #4
    azegurb NNTP User

    Default Re: help to connect via putty

    In vmware i use bridged connection
    and i use SuSe in order to create database Oracle
    what i must do

  5. #5
    Join Date
    Mar 2008
    Location
    Bochum, Germany
    Posts
    3,587

    Default Re: help to connect via putty

    * azegurb wrote, On 10/11/2009 11:06 AM:
    > In vmware i use bridged connection


    Then the virtual machine needs its own IP from the same network as the host. Assign it manually inside the virtual machine or use DHCP (probably not the best ID for a database server).

    Uwe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •