anomex
September 19, 2009, 7:12pm
1
Hello All,
I have recently installed OpenSUSE 11.1 (64 bit) on my new HP Pavilion DV6-1240SA. There a few bits and pieces not working as hoped though mainly I’m having trouble with the driver for my ATI Radeon HD 4530 graphics card.
I have installed the ATI Proprietary drivers via their website and using the auto-install facility. It appears that the correct resolution has been set etc. though when scrolling through web pages for example, the screen is ‘jerky’.
Any help is greatly appreciated. Thanks in advance!
Kind Regards,
Paul Smith.
anomex
September 20, 2009, 8:03pm
3
Result:
# /.../
# SaX generated X11 config file
# Created on: 2009-09-19T16:16:05+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection
Section "Module"
Load "dri"
Load "dbe"
Load "freetype"
Load "extmod"
Load "glx"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "gb"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Mouse[1]"
Driver "synaptics"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "HorizScrollDelta" "0"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse[3]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Generic Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
VendorName "Unknown"
ModelName "Unknown"
UseModes "Modes[0]"
DisplaySize 344 193
HorizSync 30.0 - 40.0
VertRefresh 50.0 - 75.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device[0]"
Driver "fbdev"
VendorName "VESA"
BoardName "Framebuffer Graphics"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Thanks ‘caf4926’.
caf4926
September 20, 2009, 8:30pm
4
Go to Yast - Hardware - Graphics and Monitor and set up in there.
If you use a LCD probably the best monitor option is the generic -->LCD and resolution for your screen
Currently your xorg file is showing you still using vesa:
Section "Device"
Identifier "Device[0]"
Driver "fbdev"
VendorName "VESA"
BoardName "Framebuffer Graphics"
Also check here for help
ATI - openSUSE
anomex
September 21, 2009, 7:01pm
5
Hello,
Having started from scratch I followed the OpenSUSE ATI guide that you told me about and all is working well. Thanks again for your help!
Regards,
Paul.