Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: stretched screen

  1. #1

    Default stretched screen

    Hi there,

    I got myself an Acer Aspire One 751 netbook yesterday and installed suse 11.1 today. I used the dvd image on a pendrive for installation and as far as I've checked (didn't bother getting internet and such working, I've got a suse 11.1 desktop here as well) nearly everything seems fine.

    Except for the screen size. The complete screen is being filled, but everything is stretched in the horizontal direction. The screen has a 16:9 ratio and it seems fine in the already installed Windows XP, but with linux it doesn't.

    I did follow the instructions mentioned here, that is, change
    Code:
    DISPLAYMANAGER_RANDR_MODE_VGA="auto"
    into
    Code:
    DISPLAYMANAGER_RANDR_MODE_VGA=""
    in /etc/sysconfig/displaymanager, but that didn't do the trick. In fact, "auto" was already gone when I first opened the file, but I tried both (with and without "auto"). Also I cannot make sax2 adjust the screen shape to solve it.

    Does anyone have an idea how to change it?

    Cheers,
    Vinay

  2. #2
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    20,925
    Blog Entries
    14

    Default Re: stretched screen

    What's the video card / chip in the laptop? You might need proprietary drivers to get this working.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  3. #3

    Default Re: stretched screen

    Hi,

    thank you for your reply. It says "Vesa framebuffer graphics" in Sax2, not too sure if that is what you're after. The graphics card is on-board. The processor is Intel Atom Z520, if that is of any help.

    Cheers,
    Vinay

  4. #4

    Default Re: stretched screen

    Hi,

    this may be the info you were looking for:
    Code:
    13: PCI 02.0: 0300 VGA compatible controller (VGA)
      [Created at pci.318]
      UDI: /org/freedesktop/Hal/devices/pci_8086_8108
      Unique ID: _Znp.mMhpgw3h8oF
      SysFS ID: /devices/pci0000:00/0000:00:02.0
      SysFS BusID: 0000:00:02.0
      Hardware Class: graphics card
      Model: "Intel System Controller Hub (SCH Poulsbo) Graphics Controller"
      Vendor: pci 0x8086 "Intel Corporation"
      Device: pci 0x8108 "System Controller Hub (SCH Poulsbo) Graphics Controller"
      SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
      SubDevice: pci 0x0244 
      Revision: 0x07
      Memory Range: 0xb0080000-0xb00fffff (rw,non-prefetchable)
      I/O Ports: 0x1800-0x1807 (rw)
      Memory Range: 0xc0000000-0xcfffffff (rw,non-prefetchable)
      Memory Range: 0xb0000000-0xb003ffff (rw,non-prefetchable)
      IRQ: 7 (no events)
      I/O Ports: 0x3c0-0x3df (rw)
      Module Alias: "pci:v00008086d00008108sv00001025sd00000244bc03sc00i00"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
    As for the screen itself:
    Code:
    52: None 00.0: 10000 Monitor
      [Created at fb.71]
      Unique ID: rdCR.EY_qmtb9YY0
      Hardware Class: monitor
      Model: "Generic Monitor"
      Vendor: "Generic"
      Device: "Monitor"
      Resolution: 1024x768@76Hz
      Driver Info #0:
        Max. Resolution: 1024x768
        Vert. Sync Range: 50-90 Hz
        Hor. Sync Range: 31-61 kHz
      Config Status: cfg=new, avail=yes, need=no, active=unknown
    The acer website mentions resolution should be 1366x768, by the way.

    Cheers,
    Vinay

  5. #5

    Default Re: stretched screen

    Hi,

    still haven't got it to work, but I noticed that the Grub screen has "vga=0x317" as boot option for linux, which seems to relate to 1024x768. I've been looking into some tables but can't find anything for 16bit 1366x768. In sax2 I now also chose LCD, which allows me to chose for the proper resolution, but the drop down menu below still only has the 1024x768 and 800x600 options.

    By the way I have had it connected to the internet and ran the updates, but that didn't solve the issue either.

    I also tried to change
    Code:
    DISPLAYMANAGER_RANDR_MODE_VGA=""
    in /etc/sysconfig/displaymanager to
    Code:
    DISPLAYMANAGER_RANDR_MODE_VGA="1366x768_60 1368 1440 1584 1800 768 769 772 795"
    but even that doesn't help one bit (and fortunately doesn't make it any worse either).

    I'm a bit disappointed as I got myself exactly the same Acer Aspire 751 with SuSE 11.1 as described in the instructions I refer to in my first post. The author there apparently got it to work so that got me surprised that for me it doesn't. Same software, same hardware, it should be doable, right?

    Anyone some good advice? I don't use my computer for movies and such (never tried whether it works either) and for typing and such I can live perfectly fine with the stretched screen, but for making drawings and such it is important that the screen ratio is right.

    Thank you,
    Vinay

  6. #6
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    20,925
    Blog Entries
    14

    Default Re: stretched screen

    Don't expect too much from the Intel video chip. Widescreen resolution in GRUB is not yet possible. What you want is the desktop to be in the right resolution.
    Start sax2 and adjust the preferred mode if possible. If not, change monitor to LCD with proper resolution and refresh rate. Check if preferred mode now is OK. Save and exit.

    Please let us know the results.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  7. #7
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,698
    Blog Entries
    1

    Default Re: stretched screen

    As Knurpht mentioned, you may need to install proprietary drivers if you have ATI or NVIDIA chipset. For Intel chipsets, careful monitor selection is required, and sometimes manual xorg.conf tuning may also be required.

    Can you post the output of one of the following commands?

    /sbin/lspci -k |grep VGA -A2
    /usr/sbin/hwinfo --gfxcard
    Edit: I missed the fact that you have Intel graphics chipset. If you still have problems with display after monitor configuration (as per Knurpht's advice), please post your /etc/X11/xorg.conf contents for us to have a look at. Good luck.

  8. #8

    Default Re: stretched screen

    Hi Knurpht and Deano,

    thank you for your response.

    I already chose for the LCD 1366x768@60HZ in sax2. Yet still the drop down menu below still only allows me to choose between 800x600 and 1024x768.

    Please see xorg.conf below:
    Code:
    # /.../
    # SaX generated X11 config file
    # Created on: 2009-09-17T14:29:47+0200.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
      Option       "ZapWarning" "on"
    EndSection
    
    Section "Module"
      Load         "freetype"
      Load         "dbe"
      Load         "dri"
      Load         "glx"
      Load         "extmod"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "us"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
    EndSection
    
    
    Section "InputDevice"
      Driver       "mouse"
      Identifier   "Mouse[1]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Name" "Logitech Premium Optical Wheel Mouse"
      Option       "Protocol" "explorerps/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
      Driver       "synaptics"
      Identifier   "Mouse[3]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Emulate3Buttons" "on"
      Option       "HorizScrollDelta" "0"
      Option       "InputFashion" "Mouse"
      Option       "Name" "Synaptics;Touchpad"
      Option       "Protocol" "explorerps/2"
      Option       "SHMConfig" "on"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    
    Section "Monitor"
      Option       "CalcAlgorithm" "XServerPool"
      DisplaySize  270 152
      HorizSync    46-49
      Identifier   "Monitor[0]"
      ModelName    "1366X768@60HZ"
      Option       "DPMS"
      Option       "PreferredMode" "1366x768"
      VendorName   "--> LCD"
      VertRefresh  59-61
      UseModes     "Modes[0]"
    EndSection
    
    
    Section "Modes"
      Identifier   "Modes[0]"
    EndSection
    
    
    Section "Screen"
      SubSection "Display"
        Depth      15
        Modes      "default" 
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "default" 
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "default" 
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "default" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    
    Section "Device"
      BoardName    "Framebuffer Graphics"
      Driver       "fbdev"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "VESA"
    EndSection
    
    
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      InputDevice  "Mouse[3]" "SendCoreEvents"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    
    Section "Extensions"
    EndSection
    and the requested shell output:
    Code:
    vinay@linux-k9gh:~/Documents/computer> /sbin/lspci -k |grep VGA -A2
    00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07)
    00:1b.0 Audio device: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller (rev 07)
            Kernel driver in use: HDA Intel
    
    linux-k9gh:/home/vinay/Documents/computer # /usr/sbin/hwinfo -gfxcard
    oops: don't know what to do with "gfxcard"
    The latter may not give you the info you were looking for, but the two boxes in my last post yesterday are extracts from hwinfo. Perhaps these are of any help.

    Thanks again,
    Vinay

  9. #9
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    20,925
    Blog Entries
    14

    Default Re: stretched screen

    De video driver in xorg.conf is 'fbdev'. That's not going to bring the resolutions you need. AFAIK you need the intel driver to be used by Xorg. Logout, Ctrl-Alt-F1 to go to console, login with username and password, and do:

    su -c 'init 3'

    su -c 'sax2 -r -m0=intel'

    Pick Change Configuration to check the new values, adjust where needed, save and exit.

    su -c 'init 5 && exit'

    Each command will ask you for the root password.

    Good luck and keep up the faith, it will work.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  10. #10

    Default Re: stretched screen

    Hi again,

    thank you for your help. After the step "su -c 'sax2 -r -m0=intel'", sax mentioned there was a problem and refers to /var/log/SaX.log, so here it comes:

    Code:
    /*************
    SaX2 log     : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17
    **************
    SVN RELEASE  : 1870
                 :
    DESCRIPTION  : X11 configuration log file to collect information
                 : about detection, startup and configuration.
                 : There are three parts of logging:
                 : ---
                 : 1) INIT     ( detection, 3D )
                 : 2) STARTUP  ( xorg.conf, X11 log, glxinfo )
                 : 3) CONFIG   ( config actions )
                 : ---
                 :
    VERSION      : SaX2 compiled for: [OTHER]
    PARAMETER    : -r -m0=intel -r
                 :
    LOG DATE     : Thu Sep 17 16:41:31 CEST 2009
    *************/
    ============================
    Framebuffer Info:
    ----------------------------
    Framebuffer is active
    
    17-Sep 16:41:32 <I> Initializing...
    17-Sep 16:41:33 <I> [ Sysp: Mouse detection data
    	Mouse0    =>  Protocol   : explorerps/2
    	Mouse0    =>  Device     : /dev/input/mice
    	Mouse0    =>  Buttons    : 5
    	Mouse0    =>  Wheel      : 1
    	Mouse0    =>  Emulate    : 0
    	Mouse0    =>  Name       : Logitech Premium Optical Wheel Mouse
    	Mouse0    =>  VendorID   : 0x046d
    	Mouse0    =>  DeviceID   : 0xc03e
    	Mouse0    =>  Profile    : <undefined>
    	Mouse0    =>  RealDevice : /dev/input/by-path/pci-0000:00:1d.1-usb-0:1.2:1.0-event-mouse
    	Mouse0    =>  NutShell   : 0
    	
    	Mouse1    =>  Protocol   : explorerps/2
    	Mouse1    =>  Device     : /dev/input/mice
    	Mouse1    =>  Buttons    : 5
    	Mouse1    =>  Wheel      : 1
    	Mouse1    =>  Emulate    : 0
    	Mouse1    =>  Name       : SynPS/2 Synaptics TouchPad
    	Mouse1    =>  VendorID   : 0x0002
    	Mouse1    =>  DeviceID   : 0x0007
    	Mouse1    =>  Profile    : synaptics
    	Mouse1    =>  RealDevice : /dev/input/by-path/platform-i8042-serio-2-event-mouse
    	Mouse1    =>  NutShell   : 0
    ]
    17-Sep 16:41:34 <I> [ Sysp: Keyboard detection data
    	Keyboard0 =>  XkbModel   : microsoftpro
    	Keyboard0 =>  XkbLayout  : us
    	Keyboard0 =>  Name       : Ortek USB Keyboard Hub
    	Keyboard0 =>  VendorID   : 0x05a4
    	Keyboard0 =>  DeviceID   : 0x9862
    	Keyboard0 =>  Profile    : <undefined>
    	Keyboard0 =>  RealDevice : /dev/input/input3
    	
    	Keyboard1 =>  XkbModel   : microsoftpro
    	Keyboard1 =>  XkbLayout  : us
    	Keyboard1 =>  Name       : AT Translated Set 2 keyboard
    	Keyboard1 =>  VendorID   : 0x0001
    	Keyboard1 =>  DeviceID   : 0x0001
    	Keyboard1 =>  Profile    : <undefined>
    	Keyboard1 =>  RealDevice : /dev/input/event0
    ]
    17-Sep 16:41:34 <I> [ Sysp: Server detection data
    	Card0     =>  DomainId   : 0x0
    	Card0     =>  BusId      : 0x0
    	Card0     =>  SlotId     : 0x02
    	Card0     =>  FuncId     : 0x0
    	Card0     =>  Vendor     : VESA
    	Card0     =>  Device     : Framebuffer Graphics
    	Card0     =>  VID        : 0x8086
    	Card0     =>  DID        : 0x8108
    	Card0     =>  Module     : intel
    	Card0     =>  BusType    : PCI
    	Card0     =>  Detected   : 1
    	Card0     =>  Flag       : DEFAULT
    	Card0     =>  SUB-VID    : 0x1025
    	Card0     =>  SUB-DID    : 0x0244
    	Card0     =>  DrvProfile : Depth24,Intel,AIGLX,Composite,Virtual2k
    ]
    17-Sep 16:41:47 <I> [ Sysp: XStuff detection data
    	Card0     =>  DDC        : AUO205C
    	Card0     =>  Name       : AUO LCD Monitor
    	Card0     =>  Vendor     : AUO
    	Card0     =>  Primary    : 00-02-0
    	Card0     =>  Chipset    : <undefined>
    	Card0     =>  Vsync      : 60
    	Card0     =>  Hsync      : 66
    	Card0     =>  Vesa       : 1366 768 66 60
    	Card0     =>  Dacspeed   : 220
    	Card0     =>  Modeline   : <undefined>
    	Card0     =>  Memory     : 4096
    	Card0     =>  RandR      : <undefined>
    	Card0     =>  Current    : 00-02-0
    	Card0     =>  RawDef     : None
    	Card0     =>  Option     : None
    	Card0     =>  Extension  : None
    	Card0     =>  Module     : intel
    	Card0     =>  Display    : LCD/TFT
    	Card0     =>  VesaBios   : 3.0
    	Card0     =>  FBBoot     : 800 600 16 788
    	Card0     =>  FBBoot     : 800 600 24 789
    	Card0     =>  FBBoot     : 800 600 8 771
    	Card0     =>  FBBoot     : 1024 768 8 773
    	Card0     =>  FBBoot     : 1024 768 16 791
    	Card0     =>  FBBoot     : 1024 768 24 792
    ]
    17-Sep 16:41:51 <I> [ Sysp: 3D detection data
    	Card3D0   =>  Install    : <none>
    	Card3D0   =>  Remove     : <none>
    	Card3D0   =>  Packages   : <none>
    	Card3D0   =>  Active     : 1
    	Card3D0   =>  Answer     : no
    	Card3D0   =>  ScriptReal : <none>
    	Card3D0   =>  ScriptSoft : <none>
    	Card3D0   =>  Flag       : <none>
    ]
    17-Sep 16:41:55 <X> Startup...
    17-Sep 16:41:55 <X> Startup on new Server: <:0.0>
    17-Sep 16:41:55 <X> Logging File contents: /tmp/sax2-3632/xorg.conf [
    	# /.../
    	# SaX generated X11 config file
    	# Created on: 2009-09-17T16:41:55+0200.
    	#
    	# Version: 8.1
    	# Contact: Marcus Schaefer <sax@suse.de>, 2005
    	# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    	#
    	# Automatically generated by [SaX2] (8.1)
    	# PLEASE DO NOT EDIT THIS FILE!
    	#
    	
    	Section "Files"
    	  FontPath     "/usr/share/fonts/misc:unscaled"
    	  FontPath     "/usr/share/fonts/local"
    	  FontPath     "/usr/share/fonts/75dpi:unscaled"
    	  FontPath     "/usr/share/fonts/100dpi:unscaled"
    	  FontPath     "/usr/share/fonts/Type1"
    	  FontPath     "/usr/share/fonts/URW"
    	  FontPath     "/usr/share/fonts/Speedo"
    	  FontPath     "/usr/share/fonts/PEX"
    	  FontPath     "/usr/share/fonts/cyrillic"
    	  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
    	  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
    	  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
    	  FontPath     "/usr/share/fonts/latin2/Type1"
    	  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
    	  FontPath     "/usr/share/fonts/baekmuk:unscaled"
    	  FontPath     "/usr/share/fonts/japanese:unscaled"
    	  FontPath     "/usr/share/fonts/kwintv"
    	  FontPath     "/usr/share/fonts/truetype"
    	  FontPath     "/usr/share/fonts/uni:unscaled"
    	  FontPath     "/usr/share/fonts/CID"
    	  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
    	  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
    	  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
    	  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
    	  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
    	  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
    	  FontPath     "/usr/share/fonts/hellas/Type1"
    	  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
    	  FontPath     "/usr/share/fonts/xtest"
    	  FontPath     "/opt/kde3/share/fonts"
    	  InputDevices "/dev/gpmdata"
    	  InputDevices "/dev/input/mice"
    	EndSection
    	
    	Section "Module"
    	  Load         "dri"
    	  Load         "dbe"
    	  Load         "freetype"
    	  Load         "extmod"
    	  Load         "glx"
    	EndSection
    	
    	Section "ServerFlags"
    	  Option       "AIGLX" "on"
    	  Option       "AllowMouseOpenFail" "on"
    	  Option       "ZapWarning" "on"
    	EndSection
    	
    	Section "InputDevice"
    	  Driver       "kbd"
    	  Identifier   "Keyboard[0]"
    	  Option       "Protocol" "Standard"
    	  Option       "XkbLayout" "us"
    	  Option       "XkbModel" "microsoftpro"
    	  Option       "XkbRules" "xfree86"
    	EndSection
    	
    	Section "InputDevice"
    	  Driver       "mouse"
    	  Identifier   "Mouse[1]"
    	  Option       "Buttons" "5"
    	  Option       "Device" "/dev/input/mice"
    	  Option       "Name" "Logitech Premium Optical Wheel Mouse"
    	  Option       "Protocol" "explorerps/2"
    	  Option       "Vendor" "Sysp"
    	  Option       "ZAxisMapping" "4 5"
    	EndSection
    	
    	Section "InputDevice"
    	  Driver       "synaptics"
    	  Identifier   "Mouse[3]"
    	  Option       "Buttons" "5"
    	  Option       "Device" "/dev/input/mice"
    	  Option       "Emulate3Buttons" "on"
    	  Option       "HorizScrollDelta" "0"
    	  Option       "InputFashion" "Mouse"
    	  Option       "Name" "Synaptics;Touchpad"
    	  Option       "Protocol" "explorerps/2"
    	  Option       "SHMConfig" "on"
    	  Option       "Vendor" "Sysp"
    	  Option       "ZAxisMapping" "4 5"
    	EndSection
    	
    	
    	Section "Monitor"
    	  DisplaySize  340 270
    	  HorizSync    30-66
    	  Identifier   "Monitor[0]"
    	  ModelName    "AUO LCD MONITOR"
    	  Option       "DPMS"
    	  Option       "PreferredMode" "1366x768"
    	  VendorName   "AUO"
    	  VertRefresh  43-60
    	  UseModes     "Modes[0]"
    	EndSection
    	
    	
    	Section "Modes"
    	  Identifier   "Modes[0]"
    	  Modeline 	"1366x768" 85.86 1368 1440 1584 1800 768 769 772 795
    	  Modeline 	"1360x768" 70.75 1360 1408 1440 1520 768 771 776 790 +HSync -Vsync
    	EndSection
    	
    	
    	Section "Device"
    	  BoardName    "Framebuffer Graphics"
    	  Driver       "intel"
    	  Identifier   "Device[0]"
    	  VendorName   "VESA"
    	EndSection
    	
    	
    	Section "Screen"
    	  DefaultDepth 24
    	  SubSection "Display"
    	    Depth      15
    	    Modes      "1366x768" 
    	    Virtual    2048 1200
    	  EndSubSection
    	  SubSection "Display"
    	    Depth      16
    	    Modes      "1366x768" 
    	    Virtual    2048 1200
    	  EndSubSection
    	  SubSection "Display"
    	    Depth      24
    	    Modes      "1366x768" 
    	    Virtual    2048 1200
    	  EndSubSection
    	  SubSection "Display"
    	    Depth      8
    	    Modes      "1366x768" 
    	    Virtual    2048 1200
    	  EndSubSection
    	  Device       "Device[0]"
    	  Identifier   "Screen[0]"
    	  Monitor      "Monitor[0]"
    	EndSection
    	
    	
    	Section "ServerLayout"
    	  Identifier   "Layout[all]"
    	  InputDevice  "Keyboard[0]" "CoreKeyboard"
    	  InputDevice  "Mouse[1]" "CorePointer"
    	  InputDevice  "Mouse[3]" "SendCoreEvents"
    	  Screen       "Screen[0]"
    	EndSection
    It is too much text for the forum, so I split it. The remainder is in the next post.

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •