Results 1 to 4 of 4

Thread: USB mouse not working, though recognised after sax2 config

  1. #1

    Default USB mouse not working, though recognised after sax2 config

    Hi,

    i'm using OpenSuse 11.0 on a Dell Inspiron 6400.

    History/Problem description:

    As i wanted to configure sax2 in order to use 2 monitors (as one big screen, xinerama mode - which didn't work - but thats a different and currently less important problem), i played with the configuration for a while in order to get that xinerama mode working. But then after a reboot of the X11-Server i noticed that my usb mouse didn't work any more - just my mousepad did its job like before.

    Anyone an idea how to get my usb mouse working again ?
    I restarted several times now, so thats probably not going to change anything .

    Some output that might help you:

    lsusb:
    Bus 005 Device 002: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse

    hwinfo --mouse :
    30: USB 00.0: 10503 USB Mouse
    [Created at usb.122]
    UDI: /org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0
    Unique ID: KRJj.Jezymlx7L2A
    Parent ID: uIhY.gkSaZmjGyhD
    SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
    SysFS BusID: 3-1:1.0
    Hardware Class: mouse
    Model: "Logitech USB Optical Mouse"
    Hotplug: USB
    Vendor: usb 0x046d "Logitech, Inc."
    Device: usb 0xc019 "USB Optical Mouse"
    Revision: "43.01"
    Compatible to: int 0x0210 0x0028
    Driver: "usbhid"
    Driver Modules: "usbhid"
    Device File: /dev/input/mice (/dev/input/mouse1)
    Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
    Device Number: char 13:63 (char 13:33)
    Speed: 1.5 Mbps
    Module Alias: "usb:v046DpC019d4301dc00dsc00dp00ic03isc01ip02"
    Driver Info #0:
    Buttons: 8
    Wheels: 2
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
    Config Status: cfg=no, avail=yes, need=no, active=unknown
    Attached to: #34 (Hub)

    38: PS/2 00.0: 10500 PS/2 Mouse
    [Created at input.183]
    UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input
    Unique ID: AH6Q.aaw02jN0uv2
    Hardware Class: mouse
    Model: "SynPS/2 Synaptics TouchPad"
    Vendor: 0x0002
    Device: 0x0007 "SynPS/2 Synaptics TouchPad"
    Compatible to: int 0x0210 0x0003
    Device File: /dev/input/mice (/dev/input/mouse0)
    Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
    Device Number: char 13:63 (char 13:32)
    Driver Info #0:
    Buttons: 3
    Wheels: 0
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    Thanks in advance,
    aza

  2. #2

    Default Re: USB mouse not working, though recognised after sax2 conf

    ok, i'm sorry - it works again - i don't know why, but as i configured my sax2 again, the mouse suddenly responded.

  3. #3
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    20,925
    Blog Entries
    14

    Default Re: USB mouse not working, though recognised after sax2 conf

    Next time: unplug it, plug back in. Done.
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  4. #4

    Default Re: USB mouse not working, though recognised after sax2 conf

    No, i tried that of course - i didn't work !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •