Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: knetwork manager craps when eth0 is used

  1. #1
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Exclamation knetwork manager craps when eth0 is used

    don't know where to start looking first. but, knetworkmanager works fine until i plug in eth0. after that wireless is no longer useable; even after I remove cable, reboot, and etc.
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  2. #2
    Join Date
    Oct 2008
    Location
    Stuttgart - Germany
    Posts
    163

    Default Re: knetwork manager craps when eth0 is used

    So knetworkmanager works fine with WLAN and doesn't work any more when you plug in a network cable?
    Have you checked /var/log/messages for any suspicious messages?

  3. #3
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Default Re: knetwork manager craps when eth0 is used

    Yep. after I plug the cable in the first time it just kills the ability to use networkmanager after that.
    Messages didn't give much help here's what I got in messages. this from after I disconnect eth0 to plugging the wlan adapter in.

    Code:
    Aug 31 20:13:33 bitslip kernel: b44: eth0: Link is down.
    Aug 31 20:13:33 bitslip avahi-daemon[3101]: Withdrawing address record for 192.168.1.3 on eth0.
    Aug 31 20:13:33 bitslip avahi-daemon[3101]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3.
    Aug 31 20:13:33 bitslip avahi-daemon[3101]: Interface eth0.IPv4 no longer relevant for mDNS.
    Aug 31 20:13:33 bitslip nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/autofs' exited with error status 1.
    Aug 31 20:13:33 bitslip dbus-daemon: Rejected send message, 8 matched rules; type="method_return", sender=":1.36" (uid=0 pid=4544 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.11" (uid=0 pid=3488 comm="/usr/sbin/NetworkManager "))
    Aug 31 20:13:37 bitslip nmbd[2746]: [2009/08/31 20:13:37,  0] nmbd/nmbd.c:reload_interfaces(285)
    Aug 31 20:13:37 bitslip nmbd[2746]:   reload_interfaces: No subnets to listen to. Waiting..
    Aug 31 20:14:13 bitslip kernel: usb 5-3: new high speed USB device using ehci_hcd and address 9
    Aug 31 20:14:14 bitslip kernel: usb 5-3: configuration #1 chosen from 1 choice
    Aug 31 20:14:14 bitslip kernel: usb 5-3: New USB device found, idVendor=148f, idProduct=2573
    Aug 31 20:14:14 bitslip kernel: usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Aug 31 20:14:14 bitslip kernel: usb 5-3: Product: 802.11 bg WLAN
    Aug 31 20:14:14 bitslip kernel: usb 5-3: Manufacturer: Ralink
    Aug 31 20:14:14 bitslip kernel: phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
    Aug 31 20:14:14 bitslip kernel: phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
    Aug 31 20:14:14 bitslip kernel: usbcore: registered new interface driver rt2500usb
    Aug 31 20:14:14 bitslip kernel: phy1: Selected rate control algorithm 'pid'
    Aug 31 20:14:15 bitslip kernel: Registered led device: rt73usb-phy1::radio
    Aug 31 20:14:15 bitslip kernel: Registered led device: rt73usb-phy1::assoc
    Aug 31 20:14:15 bitslip kernel: Registered led device: rt73usb-phy1::quality
    Aug 31 20:14:15 bitslip kernel: usbcore: registered new interface driver rt73usb
    Aug 31 20:14:15 bitslip ifup: interface 'wmaster0' is a wlan helper interface. Exiting.
    Aug 31 20:14:15 bitslip ifup: Network interface is managed from NetworkManager
    Aug 31 20:14:15 bitslip ifup: NetworkManager will be advised to set up wlan0
    Aug 31 20:14:15 bitslip ifup: but it cannot be assured from here.
    Aug 31 20:14:19 bitslip kernel: firmware: requesting rt73.bin
    Aug 31 20:14:19 bitslip kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Aug 31 20:16:26 bitslip su: (to psyber.netik) psyber.netik on /dev/pts/1
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  4. #4
    goldie NNTP User

    Default Re: knetwork manager craps when eth0 is used

    potty mouth

    --
    goldie

  5. #5
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Default Re: knetwork manager craps when eth0 is used

    Quote Originally Posted by goldie View Post
    potty mouth

    --
    goldie
    o.O? Noobasaurusrex....
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  6. #6
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Default Re: knetwork manager craps when eth0 is used

    bump bump bump
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  7. #7
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Unhappy Re: knetwork manager craps when eth0 is used

    bump bump bump
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  8. #8
    Join Date
    Mar 2009
    Location
    London
    Posts
    426

    Default Re: knetwork manager craps when eth0 is used

    Hi,

    Have you checked your network devices settings in YaST?

    What is the output of
    Code:
    ifconfig
    ?

    Regards,
    Barry.

  9. #9
    Join Date
    May 2009
    Location
    On a rock in the middle of the world's biggest puddle.
    Posts
    162

    Default Re: knetwork manager craps when eth0 is used

    yes I have... It see's everything as being controlled by knetworkmanager...

    When I do an IFCONFIG nothing happens. That's to say no packets, IP, or connectivity. I'd try to use yast to setup the config, but it doesn't have the option for me to use WPA(TKIP).
    [****... What'd I do to break this **** thing...]
    Acer Aspire 5610Z (OpenSUSE 11.3) / Gateway Solo 9550 (OpenSUSE 11.3) / Gateway Solo 9550 (Trisquel 4.0.1 TARANIS) / Toshiba Satellite (WIN7)
    FSF Member #8193
    DC808-1 / 2600 Honolulu

  10. #10

    Default Re: knetwork manager craps when eth0 is used

    Quote Originally Posted by psybernetik View Post
    yes I have... It see's everything as being controlled by knetworkmanager...

    When I do an IFCONFIG nothing happens. That's to say no packets, IP, or connectivity. I'd try to use yast to setup the config, but it doesn't have the option for me to use WPA(TKIP).
    Have you tried using Kinternet???
    --
    Vivek Bhat
    Linux User #496540
    Dell 620 S Desktop, 8GB, Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz, openSuSE Leap 42.1
    +Plasma 5, Kernel 4.1.20-11-default x86_64

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •