Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Problem burning CD and DVD with K3B

  1. #1
    Join Date
    Jun 2008
    Location
    Managua, Nicaragua
    Posts
    417

    Default Problem burning CD and DVD with K3B

    I am having problems burning CD and DVD with K3B and Nero, with nero it close just after the burning process has started, and k3b stops at the 50 % of the process, note that I don't have an internet connection in this PC, the only changes that I have made to this system is the installation of VLC 1.0 and the removal of a 250 GB IDE Hard drive, after trying to burn a cd or DVD KDE crash constantly with a kio_media_mounthelper failure.

    this is the output for K3B:

    HTML Code:
    eduardo@suse-blue:~> k3b
    eduardo@suse-blue:~> (K3bDevice::HalConnection) initializing HAL >= 0.5
    Mapping udi /org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH10N to device /dev/sr0
    /dev/sr0 resolved to /dev/sr0
    /dev/sr0 is block device (0)
    /dev/sr0 seems to be cdrom
    bus: 3, id: 0, lun: 0
    (K3bDevice::Device) /dev/sr0: init()
    (K3bDevice::Device) /dev/sr0 feature: CD Mastering
    (K3bDevice::Device) /dev/sr0 feature: CD Track At Once
    (K3bDevice::Device) /dev/sr0 feature: CD-RW Media Write Support
    (K3bDevice::Device) /dev/sr0 feature: DVD Read (MMC5)
    (K3bDevice::Device) /dev/sr0 feature: DVD+R
    (K3bDevice::Device) /dev/sr0 feature: DVD+RW
    (K3bDevice::Device) /dev/sr0 feature: DVD+R Double Layer
    (K3bDevice::Device) /dev/sr0 feature: DVD-R/-RW Write
    (K3bDevice::Device) /dev/sr0 feature: Rigid Restricted Overwrite
    (K3bDevice::Device) /dev/sr0 feature: Layer Jump Recording
    (K3bDevice::Device) /dev/sr0 unknown profile: 2
    (K3bDevice::Device) /dev/sr0: dataLen: 60
    (K3bDevice::Device) /dev/sr0: checking for TAO
    (K3bDevice::Device) /dev/sr0: checking for SAO
    (K3bDevice::Device) /dev/sr0: checking for SAO_R96P
    (K3bDevice::Device) /dev/sr0: checking for SAO_R96R
    (K3bDevice::Device) /dev/sr0: checking for RAW_R16
    (K3bDevice::Device) /dev/sr0: checking for RAW_R96P
    (K3bDevice::Device) /dev/sr0: checking for RAW_R96R
    (K3bDevice::DeviceManager) setting current write speed of device /dev/sr0 to 706
    /dev/sr0 resolved to /dev/sr0
    (K3bDevice::DeviceManager) dev /dev/sr0 already found
    (K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST DVD-RAM GH10N
    DiskInfo:
    Mediatype:       CD-RW
    Current Profile: CD-RW
    Disk state:      incomplete
    Empty:           0
    Rewritable:      1
    Appendable:      1
    Sessions:        1
    Tracks:          1
    Layers:          1
    Capacity:        79:57:74 (LBA 359849) (736970752 Bytes)
    Remaining size:  38:14:11 (LBA 172061) (352380928 Bytes)
    Used Size:       41:43:63 (LBA 187788) (384589824 Bytes)
    Session |  ADR   | CONTROL|  TNO   | POINT  |  Min   |  Sec   | Frame  |  Zero  |  PMIN  |  PSEC  | PFRAME |
          1 |      1 |      4 |      0 |     a0 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
          1 |      1 |      4 |      0 |     a1 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
          1 |      1 |      4 |      0 |     a2 |      0 |      0 |      0 |      0 |     41 |     13 |     63 |
          1 |      1 |      4 |      0 |      1 |      0 |      0 |      0 |      0 |      0 |      2 |      0 |
          1 |      5 |      4 |      0 |     b0 |     43 |     43 |     63 |      3 |     79 |     59 |     74 |
          1 |      5 |      4 |      0 |     c0 |    162 |      0 |    140 |      0 |     97 |     10 |      0 |
          1 |      5 |      4 |      0 |     c1 |      4 |    148 |     96 |      0 |      0 |      0 |      0 |
    (K3bDevice::Device) found invalid bcd values. No bcd toc.
    /dev/sr0: setting last sector of last track to 185387
    (K3bDevice::Device) /dev/sr0:  Number of supported write speeds via 2A: 1
    (K3bDevice::Device) /dev/sr0 : 706 KB/s
    Devices:
    ------------------------------
    Blockdevice:    /dev/sr0
    Generic device:
    Vendor:         HL-DT-ST
    Description:    DVD-RAM GH10N
    Version:        EX02
    Write speed:    22160
    Profiles:       DVD-ROM, DVD-R secuencial, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RAM, DVD-RW sobreescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-ROM, CD-R, CD-RW
    Read Cap:       DVD-ROM, DVD-R, DVD-R secuencial, DVD-R doble capa, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RW, DVD-RW sobreescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+RW doble capa, DVD+R doble capa, CD-ROM, CD-R, CD-RW
    Write Cap:      DVD-R, DVD-R secuencial, DVD-R doble capa, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RW, DVD-RW sobreescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-R, CD-RW
    Writing modes:  SAO, TAO, En bruto, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescritura restringida, Salto de capa
    Reader aliases: /dev/sr0
    ------------------------------
    Session |  ADR   | CONTROL|  TNO   | POINT  |  Min   |  Sec   | Frame  |  Zero  |  PMIN  |  PSEC  | PFRAME |
          1 |      1 |      4 |      0 |     a0 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
          1 |      1 |      4 |      0 |     a1 |      0 |      0 |      0 |      0 |      1 |      0 |      0 |
          1 |      1 |      4 |      0 |     a2 |      0 |      0 |      0 |      0 |     41 |     13 |     63 |
          1 |      1 |      4 |      0 |      1 |      0 |      0 |      0 |      0 |      0 |      2 |      0 |
          1 |      5 |      4 |      0 |     b0 |     43 |     43 |     63 |      3 |     79 |     59 |     74 |
          1 |      5 |      4 |      0 |     c0 |    162 |      0 |    140 |      0 |     97 |     10 |      0 |
          1 |      5 |      4 |      0 |     c1 |      4 |    148 |     96 |      0 |      0 |      0 |      0 |
    (K3bDevice::Device) found invalid bcd values. No bcd toc.
    /dev/sr0: setting last sector of last track to 185387
    (K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH10N
    (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH10N
    removing udi /org/freedesktop/Hal/devices/volume_label_ROKOLA
    (K3bDevice::Device) /dev/sr0 current profile 0. Checking current profile list instead.
    (K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
    ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (376)

    I have tried with different media CD and DVD.

  2. #2
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,857
    Blog Entries
    20

    Default Re: Problem burning CD and DVD with K3B

    What was on the 250GB drive?

    Post result from su terminal of:

    Code:
    fdisk -l
    Tumbleweed_KDE
    My Articles Was I any help? If yes: Click the star below

  3. #3
    Join Date
    Jun 2008
    Location
    Managua, Nicaragua
    Posts
    417

    Default Re: Problem burning CD and DVD with K3B

    This is the output of fdisk -l

    Code:
     
    suse-blue:/home/eduardo # fdisk -l
    
    Disco /dev/sda: 160.0 GB, 160041885696 bytes
    255 heads, 63 sectors/track, 19457 cylinders
    Units = cilindros of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x26f2c5a5
    
    Disposit. Inicio    Comienzo      Fin      Bloques  Id  Sistema
    /dev/sda1               2         262     2096482+  82  Linux swap / Solaris
    /dev/sda2   *         263        2872    20964825   83  Linux
    /dev/sda3            2873       19457   133219012+  83  Linux
    suse-blue:/home/eduardo #

    I believe that it is a mounting/unmounting problem, if I reboot the pc I am able to burn a cd, but if I try to burn another cd without rebooting I get the error, I have to reboot to be able to burn a cd or DVD, konkeror and even the command line output errors.

  4. #4
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    20,925
    Blog Entries
    14

    Default Re: Problem burning CD and DVD with K3B

    Can you post the content of /etc/fstab as well ?
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  5. #5
    Join Date
    Jun 2008
    Location
    Managua, Nicaragua
    Posts
    417

    Default Re: Problem burning CD and DVD with K3B

    Code:
     
    
    /dev/disk/by-id/ata-WDC_WD1600AAJS-08WAA0_WD-WCAS25475368-part1 swap                 swap       defaults              0 0
    /dev/disk/by-id/ata-WDC_WD1600AAJS-08WAA0_WD-WCAS25475368-part2 /                    ext3       acl,user_xattr        1 1
    /dev/disk/by-id/ata-WDC_WD1600AAJS-08WAA0_WD-WCAS25475368-part3 /home                ext3       acl,user_xattr        1 2
    proc                 /proc                proc       defaults              0 0
    sysfs                /sys                 sysfs      noauto                0 0
    debugfs              /sys/kernel/debug    debugfs    noauto                0 0
    usbfs                /proc/bus/usb        usbfs      noauto                0 0
    devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
    /dev/disk/by-id/ata-Hitachi_HCS725025VLAT80_VF6104R635TS6W-part1 /master              ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=es_ES.UTF-8 0 0

    I have deleted the last entry and the problem still persist, now other applications like vlc, kaffeine and mplayer crash too after trying to burn a cd, I have also reinstalled k3b and nero and also deleted the .nero folder in home.

    The burner is new, before I had an IDE and now it is a SATA but it was burning fine.

  6. #6
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,857
    Blog Entries
    20

    Default Re: Problem burning CD and DVD with K3B

    Post the result of this:

    Code:
    rpm -qi k3b k3b-codecs
    Tumbleweed_KDE
    My Articles Was I any help? If yes: Click the star below

  7. #7
    Join Date
    Jun 2008
    Location
    Managua, Nicaragua
    Posts
    417

    Default Re: Problem burning CD and DVD with K3B

    It seems that it was a memory problem, yesterday I was unable to use the pc, everything crashed, I wasn`t able to do a backup or even boot from the live dvd, so I reseated the memory and now the problem is gone, the only problem that I have with k3b now is that it is not verifying the compilations, but is burning fine, when I check the option to verify it stays at the 50 % and eject the disk when the burning session ends buy it does not verify the compilation.

  8. #8
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,857
    Blog Entries
    20

    Default Re: Problem burning CD and DVD with K3B

    I think a couple of us were thinking along memory (swap) because you had mentioned removing a drive.
    But happy it's basically ok. I never use the verify myself.
    Tumbleweed_KDE
    My Articles Was I any help? If yes: Click the star below

  9. #9
    Join Date
    Jun 2008
    Location
    Managua, Nicaragua
    Posts
    417

    Default Re: Problem burning CD and DVD with K3B

    I think a couple of us were thinking along memory (swap) because you had mentioned removing a drive.
    you say in the case that the swap was in the removed drive?

  10. #10
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,857
    Blog Entries
    20

    Default Re: Problem burning CD and DVD with K3B

    Quote Originally Posted by Easgs View Post
    you say in the case that the swap was in the removed drive?
    I was wondering that and @Knurpht was I think having similar thoughts, that's why we wanted to see fstab also. Just because fdisk shows a swap doesn't mean it's configured to use that in fstab.
    Tumbleweed_KDE
    My Articles Was I any help? If yes: Click the star below

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •