Results 1 to 5 of 5

Thread: Help Please!!!

  1. #1

    Unhappy Help Please!!!

    Hello everybody!
    I'm having some trouble because my opensuse 11.1 crashes and i dont know why. It crashes sometimes very soon and sometimes it works fine a couple of days and then crashes... i think it has something to do with my wireless card cos of the /var/log/messages... can somebody help me please?
    this is an extract of the /log/messages from the last time it crashed

    Code:
    Jul  6 14:56:37 UltimateLinux dhcpcd[6785]: wlan0: removing IP address 169.254.217.226/16
    Jul  6 14:56:37 UltimateLinux avahi-daemon[3447]: Withdrawing address record for 169.254.217.226 on wlan0.
    Jul  6 14:56:37 UltimateLinux avahi-daemon[3447]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 169.254.217.226.
    Jul  6 14:56:37 UltimateLinux avahi-daemon[3447]: Interface wlan0.IPv4 no longer relevant for mDNS.
    Jul  6 14:56:37 UltimateLinux dhcpcd[6785]: wlan0: exiting
    Jul  6 14:56:37 UltimateLinux avahi-daemon[3447]: Withdrawing address record for fe80::219:5bff:fe2d:77ec on wlan0.
    Jul  6 14:56:37 UltimateLinux kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jul  6 14:56:37 UltimateLinux kernel: wlan0: deauthenticating by local choice (reason=3)
    Jul  6 14:56:38 UltimateLinux dhcpcd[6926]: eth0: dhcpcd not running
    Jul  6 14:56:38 UltimateLinux dhcpcd[6926]: eth0: exiting
    Jul  6 14:56:38 UltimateLinux kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Jul  6 14:56:38 UltimateLinux dhcpcd[6933]: wlan0: dhcpcd not running
    Jul  6 14:56:38 UltimateLinux dhcpcd[6933]: wlan0: exiting
    Jul  6 14:56:38 UltimateLinux kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jul  6 14:56:39 UltimateLinux dhcpcd[6944]: wlan0: dhcpcd 3.2.3 starting
    Jul  6 14:56:39 UltimateLinux dhcpcd[6944]: wlan0: hardware address = 00:19:5b:2d:77:ec
    Jul  6 14:56:39 UltimateLinux dhcpcd[6944]: wlan0: broadcasting for a lease
    Jul  6 14:56:39 UltimateLinux kernel: wlan0: authenticate with AP 00:c0:a8:b4:5d:a1
    Jul  6 14:56:39 UltimateLinux kernel: wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
    Jul  6 14:56:39 UltimateLinux kernel: wlan0: authenticated
    Jul  6 14:56:39 UltimateLinux kernel: wlan0: associate with AP 00:c0:a8:b4:5d:a1
    Jul  6 14:56:39 UltimateLinux kernel: wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association
    Jul  6 14:56:40 UltimateLinux kernel: wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
    Jul  6 14:56:59 UltimateLinux dhcpcd[6944]: wlan0: timed out
    Jul  6 14:56:59 UltimateLinux dhcpcd[6944]: wlan0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-wlan0.info'
    Jul  6 14:56:59 UltimateLinux dhcpcd[6944]: wlan0: lease information file `/var/lib/dhcpcd/dhcpcd-wlan0.info' does not exist
    Jul  6 14:56:59 UltimateLinux dhcpcd[6944]: wlan0: probing for an IPV4LL address
    Jul  6 14:57:00 UltimateLinux dhcpcd[6944]: wlan0: using IPV4LL address 169.254.136.76
    Jul  6 14:57:00 UltimateLinux dhcpcd[6944]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:57:00 UltimateLinux avahi-daemon[3447]: Joining mDNS multicast group on interface wlan0.IPv4 with address 169.254.136.76.
    Jul  6 14:57:00 UltimateLinux dhcpcd[6944]: wlan0: exiting
    Jul  6 14:57:00 UltimateLinux avahi-daemon[3447]: New relevant interface wlan0.IPv4 for mDNS.
    Jul  6 14:57:00 UltimateLinux avahi-daemon[3447]: Registering new address record for 169.254.136.76 on wlan0.IPv4.
    Jul  6 14:57:02 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:57:02 UltimateLinux dhcpcd[5348]: wlan0: removing IP address 169.254.217.226/16
    Jul  6 14:57:02 UltimateLinux dhcpcd[5348]: wlan0: netlink: Cannot assign requested address
    Jul  6 14:57:31 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:57:33 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:58:02 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:58:04 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:58:33 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:58:35 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:59:04 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:59:06 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:59:35 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 14:59:37 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:00:06 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:00:08 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:00:08 UltimateLinux pulseaudio[6224]: module-alsa-sink.c: Increasing wakeup watermark to 39,66 ms
    Jul  6 15:00:37 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:00:39 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:00:51 UltimateLinux sudo: perroloco : TTY=unknown ; PWD=/usr/lib ; USER=root ; COMMAND=/usr/lib/configscript.py 0 wireless
    Jul  6 15:00:52 UltimateLinux kernel: python[7343]: segfault at 8 ip b75d52f8 sp bfbe4a20 error 4 in libgtk-x11-2.0.so.0.1400.4[b74df000+3ec000]
    Jul  6 15:00:58 UltimateLinux sudo: perroloco : TTY=unknown ; PWD=/usr/lib ; USER=root ; COMMAND=/usr/lib/configscript.py 0 wireless
    Jul  6 15:00:59 UltimateLinux kernel: python[7354]: segfault at 8 ip b75e42f8 sp bfef3530 error 4 in libgtk-x11-2.0.so.0.1400.4[b74ee000+3ec000]
    Jul  6 15:01:00 UltimateLinux sudo: perroloco : TTY=unknown ; PWD=/usr/lib ; USER=root ; COMMAND=/usr/lib/configscript.py 0 wireless
    Jul  6 15:01:00 UltimateLinux kernel: python[7359]: segfault at 8 ip b74b42f8 sp bfac5900 error 4 in libgtk-x11-2.0.so.0.1400.4[b73be000+3ec000]
    Jul  6 15:01:08 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:01:10 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:01:39 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:01:41 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:02:10 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:02:12 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:02:41 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:02:43 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:03:12 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:03:14 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:03:43 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:03:44 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:04:14 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:04:15 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:04:45 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:04:46 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:05:17 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:05:17 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:05:18 UltimateLinux smartd[4083]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 52 to 53
    Jul  6 15:05:18 UltimateLinux smartd[4083]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 48 to 47
    Jul  6 15:05:18 UltimateLinux smartd[4083]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 74 to 72
    Jul  6 15:05:19 UltimateLinux smartd[4083]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 112 to 111
    Jul  6 15:05:19 UltimateLinux smartd[4083]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 53 to 54
    Jul  6 15:05:19 UltimateLinux smartd[4083]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 47 to 46
    Jul  6 15:05:19 UltimateLinux smartd[4083]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 71 to 66
    Jul  6 15:05:48 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:05:49 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:06:19 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:06:20 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:06:50 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:06:51 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:07:21 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:07:22 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:07:52 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:07:53 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:08:05 UltimateLinux kernel: usb 7-2: new high speed USB device using ehci_hcd and address 5
    Jul  6 15:08:05 UltimateLinux kernel: usb 7-2: configuration #1 chosen from 1 choice
    Jul  6 15:08:06 UltimateLinux kernel: usb 7-2: New USB device found, idVendor=0573, idProduct=a400
    Jul  6 15:08:06 UltimateLinux kernel: usb 7-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
    Jul  6 15:08:06 UltimateLinux kernel: usb 7-2: Product: KU990
    Jul  6 15:08:06 UltimateLinux kernel: usb 7-2: Manufacturer: LG
    Jul  6 15:08:06 UltimateLinux kernel: usb 7-2: SerialNumber:  
    Jul  6 15:08:06 UltimateLinux kernel: Initializing USB Mass Storage driver...
    Jul  6 15:08:06 UltimateLinux kernel: scsi6 : SCSI emulation for USB Mass Storage devices
    Jul  6 15:08:06 UltimateLinux kernel: usb-storage: device found at 5
    Jul  6 15:08:06 UltimateLinux kernel: usb-storage: waiting for device to settle before scanning
    Jul  6 15:08:06 UltimateLinux kernel: usbcore: registered new interface driver usb-storage
    Jul  6 15:08:06 UltimateLinux kernel: USB Mass Storage support registered.
    Jul  6 15:08:07 UltimateLinux kernel: scsi 6:0:0:0: Direct-Access     LG       KU990            000  PQ: 0 ANSI: 2
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] 1983744 512-byte hardware sectors: (1.01GB/968MiB)
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Write Protect is off
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] 1983744 512-byte hardware sectors: (1.01GB/968MiB)
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Write Protect is off
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
    Jul  6 15:08:07 UltimateLinux kernel:  sdc: sdc1
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: [sdc] Attached SCSI removable disk
    Jul  6 15:08:07 UltimateLinux kernel: sd 6:0:0:0: Attached scsi generic sg4 type 0
    Jul  6 15:08:07 UltimateLinux kernel: usb-storage: device scan complete
    Jul  6 15:08:07 UltimateLinux hald: mounted /dev/sdc1 on behalf of uid 1000
    Jul  6 15:08:07 UltimateLinux gnome-keyring-daemon[6045]: adding removable location: volume_part1_size_1015549440 at /media/disk
    Jul  6 15:08:23 UltimateLinux dhcpcd[6980]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:08:24 UltimateLinux kernel: wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
    Jul  6 15:08:24 UltimateLinux dhcpcd[5348]: wlan0: adding IP address 169.254.136.76/16
    Jul  6 15:08:29 UltimateLinux kernel: wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
    Jul  6 15:08:34 UltimateLinux kernel: wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
    /* sebastianbreit.com */

  2. #2
    brassy NNTP User

    Default Re: Help Please!!!

    > Jul 6 15:08:06 UltimateLinux kernel: usb 7-2: New USB device found, idVendor=0573, idProduct=a400
    > Jul 6 15:08:06 UltimateLinux kernel: usb 7-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
    > Jul 6 15:08:06 UltimateLinux kernel: usb 7-2: Product: KU990
    > Jul 6 15:08:06 UltimateLinux kernel: usb 7-2: Manufacturer: LG


    near the bottom of your messages it show you plugged in a memory stick
    or something made by LG..

    does your machine always "crash" when you plug that device in?

    explain what you mean when you say "my opensuse 11.1 crashes"?

    -that is, what do you see?

    -does the screen go black? white?

    -or suddenly have pink stripes all over? crazy? (how so?)

    -do the shiftlock and numlock LEDs on the keyboard go out, or flash?

    -if you press the shiftlock key does the shiftlock LED turn on/off?

    -the hard drive light, does it go on and stay on?

    -or, does it go dark and stay dark?

    -if you could hear the fan(s) turning, when it crashes does that stop?

    -is this a laptop? what brand and model? how much RAM? graphic card?

    --
    brassy

  3. #3

    Default Re: Help Please!!!

    thanx for the answer! ok here we go:

    Code:
    near the bottom of your messages it show you plugged in a memory stick
    or something made by LG..
    
    does your machine always "crash" when you plug that device in?
    Its my mobile phone... i didnt think of that, ill figure it out..

    Code:
    explain what you mean when you say "my opensuse 11.1 crashes"?
    
    -that is, what do you see?
    
    -does the screen go black? white?
    
    -or suddenly have pink stripes all over? crazy? (how so?)
    
    -do the shiftlock and numlock LEDs on the keyboard go out, or flash?
    i cant move the mouse, i cant switch consoles (atrl-alt-fx), the shiftlock and numlock leds stay as they were and i cant switch them... i see my desktop but i cant do anything. the hard drive doesnt work anymore... its like it freezes and stays so.

    Code:
    -if you press the shiftlock key does the shiftlock LED turn on/off?
    no.

    Code:
    -the hard drive light, does it go on and stay on?
    
    -or, does it go dark and stay dark?
    it goes dark and stays dark.

    Code:
    -if you could hear the fan(s) turning, when it crashes does that stop?
    i dont know... :S

    Code:
    -is this a laptop? what brand and model? how much RAM? graphic card?
    its not a laptop. i got 4gb RAM, core 2 duo...its a good desktop computer...
    /* sebastianbreit.com */

  4. #4
    Join Date
    Nov 2008
    Location
    N. Wales
    Posts
    1,028

    Default Re: Help Please!!!

    asystat adjusted his/her AFDB on Friday 31 Jul 2009 20:36 to write:

    >
    > its not a laptop. i got 4gb RAM, core 2 duo...its a good desktop
    > computer...
    >
    >


    can we have some more hardware info please?

    graphics, sound, mobo, etc..

    And which drivers for graphics if they are Nvidia, ATI or Intel ( standard
    or propriety )

    You could also enable the SysRq key in Yast>System>Sysconfig Editor

    Just use the search function and then read here:

    http://en.wikipedia.org/wiki/Magic_SysRq_key

    At least you might not suffer as much data loss and have to sit through a
    fsck on reboot unless this is a full blown kernel panic/crash and it might
    write some useful info into the logs that might help in diagnosing what it
    happening.


    HTH
    --
    Mark
    Caveat emptor
    Nullus in verba
    Nil illegitimi carborundum

  5. #5
    goldie NNTP User

    Default Re: Help Please!!!

    asysat, i agree with baskitcaise that this is probably a software
    problem, and i guess most likely a graphics driver problem...so, you
    have to cough up some hardware info to get the help you want..

    --
    goldie

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •