Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Building Blitz++ issue

  1. #1

    Default Building Blitz++ issue

    Hi!

    I'm trying to build Blitz++ on my openSuse11 machine and it just doesn't build the library for it. I think this might be due to a compiler misconfiguration, but I'm still new to compiling on linux so I need any help on this. When I make the lib I get the following output:

    make[1]: Entering directory `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    if /bin/sh ../libtool --mode=compile --tag=CXX c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF ".deps/globals.Tpo" -c -o globals.lo `test -f '../src/globals.cpp' || echo './'`../src/globals.cpp; \
    then mv -f ".deps/globals.Tpo" ".deps/globals.Plo"; else rm -f ".deps/globals.Tpo"; exit 1; fi
    c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF .deps/globals.Tpo -c ../src/globals.cpp -o globals.o
    In file included from ../blitz/applics.h:400,
    from ../blitz/vecexpr.h:32,
    from ../blitz/vecpick.cc:16,
    from ../blitz/vecpick.h:293,
    from ../blitz/vector.h:449,
    from ../blitz/tinyvec.h:430,
    from ../blitz/indexexpr.h:30,
    from ../src/globals.cpp:11:
    ../blitz/mathfunc.h: In static member function 'static long int blitz::_bz_abs<long int>::apply(long int)':
    ../blitz/mathfunc.h:45: error: 'labs' is not a member of 'std'
    In file included from ../blitz/array/funcs.h:29,
    from ../blitz/array/newet.h:29,
    from ../blitz/array/et.h:27,
    from ../blitz/array-impl.h:2515,
    from ../blitz/array.h:32,
    from ../src/globals.cpp:13:
    ../blitz/funcs.h: In static member function 'static int blitz::Fn_abs<int>::apply(int)':
    ../blitz/funcs.h:509: error: call of overloaded 'abs(int&)' is ambiguous
    /usr/include/c++/4.3/cmath:99: note: candidates are: double std::abs(double)
    /usr/include/c++/4.3/cmath:103: note: float std::abs(float)
    /usr/include/c++/4.3/cmath:107: note: long double std::abs(long double)
    ../blitz/funcs.h: In static member function 'static long int blitz::Fn_abs<long int>::apply(long int)':
    ../blitz/funcs.h:530: error: 'labs' is not a member of 'std'
    make[1]: *** [globals.lo] Error 1
    make[1]: Leaving directory `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    make: *** [blitz-library] Error 1
    stafford@linux-er3h:~/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9> make check-testsuite
    make[1]: Entering directory `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    if /bin/sh ../libtool --mode=compile --tag=CXX c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF ".deps/globals.Tpo" -c -o globals.lo `test -f '../src/globals.cpp' || echo './'`../src/globals.cpp; \
    then mv -f ".deps/globals.Tpo" ".deps/globals.Plo"; else rm -f ".deps/globals.Tpo"; exit 1; fi
    c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF .deps/globals.Tpo -c../src/globals.cpp -o globals.o
    In file included from ../blitz/applics.h:400,
    from ../blitz/vecexpr.h:32,
    from ../blitz/vecpick.cc:16,
    from ../blitz/vecpick.h:293,
    from ../blitz/vector.h:449,
    from ../blitz/tinyvec.h:430,
    from ../blitz/indexexpr.h:30,
    from ../src/globals.cpp:11:
    ../blitz/mathfunc.h: In static member function 'static long int blitz::_bz_abs<long int>::apply(long int)':
    ../blitz/mathfunc.h:45: error: 'labs' is not a member of 'std'
    In file included from ../blitz/array/funcs.h:29,
    from ../blitz/array/newet.h:29,
    from ../blitz/array/et.h:27,
    from ../blitz/array-impl.h:2515,
    from ../blitz/array.h:32,
    from ../src/globals.cpp:13:
    ../blitz/funcs.h: In static member function 'static int blitz::Fn_abs<int>::apply(int)':
    ../blitz/funcs.h:509: error: call of overloaded 'abs(int&)' is ambiguous
    /usr/include/c++/4.3/cmath:99: note: candidates are: double std::abs(double)
    /usr/include/c++/4.3/cmath:103: note: float std::abs(float)
    /usr/include/c++/4.3/cmath:107: note: long double std::abs(long double)
    ../blitz/funcs.h: In static member function 'static long int blitz::Fn_abs<long int>::apply(long int)':
    ../blitz/funcs.h:530: error: 'labs' is not a member of 'std'
    make[1]: *** [globals.lo] Error 1
    make[1]: Leaving directory `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    make: *** [blitz-library] Error 1
    What could I have done wrong? I just followed the steps of the install note and my openSuse is not strongly modified. I'd appreciate any help,


    Phong

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by NhatPhongTran
    Hi!

    I'm trying to build Blitz++ on my openSuse11 machine and it just
    doesn't build the library for it. I think this might be due to a
    compiler misconfiguration, but I'm still new to compiling on linux so I
    need any help on this. When I make the lib I get the following output:

    > make[1]: Entering directory
    > `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    >
    > if /bin/sh ../libtool --mode=compile --tag=CXX c++ -DHAVE_CONFIG_H
    > -I.. -I.. -MT globals.lo -MD -MP -MF ".deps/globals.Tpo" -c -o
    > globals.lo `test -f '../src/globals.cpp' || echo
    > './'`../src/globals.cpp; \
    > then mv -f ".deps/globals.Tpo" ".deps/globals.Plo"; else rm -f
    > ".deps/globals.Tpo"; exit 1;
    > fi
    >
    > c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF
    > .deps/globals.Tpo -c ../src/globals.cpp -o
    > globals.o
    >
    > In file included
    > from ../blitz/applics.h:400,
    >
    > from ../blitz/vecexpr.h:32,
    >
    > from ../blitz/vecpick.cc:16,
    >
    > from ../blitz/vecpick.h:293,
    >
    > from ../blitz/vector.h:449,
    >
    > from ../blitz/tinyvec.h:430,
    >
    > from ../blitz/indexexpr.h:30,
    >
    > from ../src/globals.cpp:11:
    >
    > ../blitz/mathfunc.h: In static member function 'static long int
    > blitz::_bz_abs<long int>::apply(long
    > int)':
    >
    > ../blitz/mathfunc.h:45: error: 'labs' is not a member of
    > 'std'
    >
    > In file included
    > from ../blitz/array/funcs.h:29,
    >
    > from ../blitz/array/newet.h:29,
    >
    > from ../blitz/array/et.h:27,
    >
    > from ../blitz/array-impl.h:2515,
    >
    > from ../blitz/array.h:32,
    >
    > from ../src/globals.cpp:13:
    >
    > ../blitz/funcs.h: In static member function 'static int
    > blitz::Fn_abs<int>::apply(int)':
    >
    > ../blitz/funcs.h:509: error: call of overloaded 'abs(int&)' is
    > ambiguous
    > /usr/include/c++/4.3/cmath:99: note: candidates are: double
    > std::abs(double)
    > /usr/include/c++/4.3/cmath:103: note: float
    > std::abs(float)
    > /usr/include/c++/4.3/cmath:107: note: long double
    > std::abs(long
    > double)
    >
    > ../blitz/funcs.h: In static member function 'static long int
    > blitz::Fn_abs<long int>::apply(long
    > int)':
    >
    > ../blitz/funcs.h:530: error: 'labs' is not a member of
    > 'std'
    >
    > make[1]: *** [globals.lo] Error
    > 1
    >
    > make[1]: Leaving directory
    > `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    >
    > make: *** [blitz-library] Error
    > 1
    >
    > stafford@linux-er3h:~/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9>
    > make check-testsuite
    > make[1]: Entering directory
    > `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    >
    > if /bin/sh ../libtool --mode=compile --tag=CXX c++ -DHAVE_CONFIG_H
    > -I.. -I.. -MT globals.lo -MD -MP -MF ".deps/globals.Tpo" -c -o
    > globals.lo `test -f '../src/globals.cpp' || echo
    > './'`../src/globals.cpp; \
    > then mv -f ".deps/globals.Tpo" ".deps/globals.Plo"; else rm -f
    > ".deps/globals.Tpo"; exit 1; fi
    > c++ -DHAVE_CONFIG_H -I.. -I.. -MT globals.lo -MD -MP -MF
    > .deps/globals.Tpo -c../src/globals.cpp -o globals.o
    > In file included from ../blitz/applics.h:400,
    > from ../blitz/vecexpr.h:32,
    > from ../blitz/vecpick.cc:16,
    > from ../blitz/vecpick.h:293,
    > from ../blitz/vector.h:449,
    > from ../blitz/tinyvec.h:430,
    > from ../blitz/indexexpr.h:30,
    > from ../src/globals.cpp:11:
    > ../blitz/mathfunc.h: In static member function 'static long int
    > blitz::_bz_abs<long int>::apply(long int)':
    > ../blitz/mathfunc.h:45: error: 'labs' is not a member of 'std'
    > In file included from ../blitz/array/funcs.h:29,
    > from ../blitz/array/newet.h:29,
    > from ../blitz/array/et.h:27,
    > from ../blitz/array-impl.h:2515,
    > from ../blitz/array.h:32,
    > from ../src/globals.cpp:13:
    > ../blitz/funcs.h: In static member function 'static int
    > blitz::Fn_abs<int>::apply(int)':
    > ../blitz/funcs.h:509: error: call of overloaded 'abs(int&)' is
    > ambiguous
    > /usr/include/c++/4.3/cmath:99: note: candidates are: double
    > std::abs(double)
    > /usr/include/c++/4.3/cmath:103: note: float
    > std::abs(float)
    > /usr/include/c++/4.3/cmath:107: note: long double
    > std::abs(long double)
    > ../blitz/funcs.h: In static member function 'static long int
    > blitz::Fn_abs<long int>::apply(long int)':
    > ../blitz/funcs.h:530: error: 'labs' is not a member of 'std'
    > make[1]: *** [globals.lo] Error 1
    > make[1]: Leaving directory
    > `/home/stafford/Documents/HOT_src_1.0rc6/src/3rdparty/src/blitz-0.9/lib'
    > make: *** [blitz-library] Error 1


    What could I have done wrong? I just followed the steps of the install
    note and my openSuse is not strongly modified. I'd appreciate any help,


    Phong
    Hi
    More than likely it needs patching to use gcc 4.3

    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 1 day 4:22, 2 users, load average: 0.05, 0.10, 0.14
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


  3. #3

    Default Re: Building Blitz++ issue

    Do you think then I might able to compile it with gcc4.2? If yes, how am I supposed to downgrade to 4.2?

  4. #4
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by NhatPhongTran
    Do you think then I might able to compile it with gcc4.2? If yes, how am
    I supposed to downgrade to 4.2?
    Hi
    No, it's better to patch, if you would like I can build an rpm for you
    based on the fc9 version?

    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 1 day 6:38, 2 users, load average: 0.22, 0.28, 0.39
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


  5. #5

    Default Re: Building Blitz++ issue

    Well the thing is that I need Blitz as a 3rd party library for something else I want to compile (Houdini Ocean Toolkit. The Houdini Ocean Toolkit &mdash; Houdini Ocean Toolkit v1.0rc6 documentation). And probably that also needs gcc4.2 to compile correctly. So I think it would be better to downgrade to gcc4.2 then right?

  6. #6
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by Malcolm
    Quote Originally Posted by NhatPhongTran
    Do you think then I might able to compile it with gcc4.2? If yes, how am
    I supposed to downgrade to 4.2?
    Hi
    No, it's better to patch, if you would like I can build an rpm for you
    based on the fc9 version?
    Hi
    If you search here Get
    It
    for blitz there should be builds for 11 and 11.1 if you grab a
    src rpm and extract it you can see the patch details.

    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 2 days 0:18, 3 users, load average: 0.28, 0.14, 0.10
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


  7. #7
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by NhatPhongTran
    Well the thing is that I need Blitz as a 3rd party library for something
    else I want to compile (Houdini Ocean Toolkit. 'The Houdini Ocean
    Toolkit &mdash; Houdini Ocean Toolkit v1.0rc6 documentation'
    (http://anusf.anu.edu.au/~drw900/houdini/ocean/docs/)). And probably
    that also needs gcc4.2 to compile correctly. So I think it would be
    better to downgrade to gcc4.2 then right?
    Hi
    It may not make a difference, you have 4.3, 4.1 and 3.3 to choose from.
    The patch should be good for 4.1 as well, just need export the gcc and
    g++ so it uses them.

    I can rebuild the rpm against that if you want?

    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 2 days 1:39, 2 users, load average: 0.11, 0.06, 0.01
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


  8. #8
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by Malcolm
    Quote Originally Posted by NhatPhongTran
    Well the thing is that I need Blitz as a 3rd party library for something
    else I want to compile (Houdini Ocean Toolkit. 'The Houdini Ocean
    Toolkit &mdash; Houdini Ocean Toolkit v1.0rc6 documentation'
    (http://anusf.anu.edu.au/~drw900/houdini/ocean/docs/)). And probably
    that also needs gcc4.2 to compile correctly. So I think it would be
    better to downgrade to gcc4.2 then right?
    Hi
    It may not make a difference, you have 4.3, 4.1 and 3.3 to choose from.
    The patch should be good for 4.1 as well, just need export the gcc and
    g++ so it uses them.

    I can rebuild the rpm against that if you want?
    Hi
    Had a look at the HOT src, in my 11.1 setup if you install gcc-4.1 and
    g++-4.1 and then export it all compiles without errors including
    blitz0.9;

    Code:
    export CC=/usr/bin/gcc-4.1
    export CXX=/usr/bin/g++-4.1
    ../build_linux.sh
    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 2 days 2:11, 2 users, load average: 0.45, 0.93, 0.71
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


  9. #9

    Default Re: Building Blitz++ issue

    Malcolm you are just great!!
    I'll try installing gcc and g++ then. But installing g++ seems to be a quite hard task, I just had a look on the installation notes and there were so many things to consider! Isn't there anything like an installer for it without needing to configure things first?

  10. #10
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,123
    Blog Entries
    15

    Default Re: Building Blitz++ issue

    Quote Originally Posted by NhatPhongTran
    Malcolm you are just great!!
    I'll try installing gcc and g++ then. But installing g++ seems to be a
    quite hard task, I just had a look on the installation notes and there
    were so many things to consider! Isn't there anything like an installer
    for it without needing to configure things first?
    Hi
    You should be able to just use zypper to install them?
    Code:
    sudo zypper in gcc41 gcc41-c++
    --
    Cheers Malcolm (Linux Counter #276890)
    SUSE Linux Enterprise Desktop 11 (x86_64) Kernel 2.6.27.25-0.1-default
    up 2 days 23:29, 3 users, load average: 1.65, 1.75, 1.54
    GPU GeForce 8600 GTS Silent - Driver Version: 185.18.14


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •