Results 1 to 5 of 5

Thread: rd1000

  1. #1
    ottrose NNTP User

    Default rd1000

    I have an internal RD100 using SATA that i am trying to use for backup. I also have a usb RD100. the usb mounts using automount and is /dev/sbc1. I can't seem to find the internal one at all. how do i find it. here is my lspci and mount info

    mount
    /dev/mapper/system-root_lv on / type reiserfs (rw,acl,user_xattr)
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw)
    udev on /dev type tmpfs (rw)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    /dev/sda3 on /boot type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-opt_lv on /opt type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-srv_lv on /srv type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-tmp_lv on /tmp type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-usr_lv on /usr type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-var_lv on /var type reiserfs (rw,acl,user_xattr)
    /dev/mapper/system-home_lv on /home type reiserfs (rw,acl,user_xattr)
    /dev/sdb1 on /ahsay1 type reiserfs (rw,acl,user_xattr)
    securityfs on /sys/kernel/security type securityfs (rw)
    /dev/sdc1 on /media/RD1000-160GB type ntfs (rw,nosuid,nodev,uid=1000)


    lspci
    00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to ESI Port (rev 13)
    00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 (rev 13)
    00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 (rev 13)
    00:04.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 4 (rev 13)
    00:05.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 5 (rev 13)
    00:06.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 6 (rev 13)
    00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 (rev 13)
    00:09.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 (rev 13)
    00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System Management Registers (rev 13)
    00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers (rev 13)
    00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers (rev 13)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
    00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
    01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
    03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
    05:00.0 PCI bridge: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge (rev bc)
    06:08.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev c1)
    08:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
    09:03.0 VGA compatible controller: Matrox Graphics, Inc. Unknown device 0532 (rev 0a)

  2. #2
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,743
    Blog Entries
    20

    Default Re: rd1000

    Whatever RD100 is?

    Try su terminal

    Code:
    fdisk -l
    Leap 15.1_KDE
    My Articles Was I any help? If yes: Click the star below

  3. #3
    ottrose NNTP User

    Default Re: rd1000

    MD1000 is like a backup tape. Dell PowerVault RD1000/114X RD1000 Removable Disk Backup



    Its attached via internal SATA cable


    fdisk -l
    Disk /dev/sda: 146.1 GB, 146163105792 bytes
    255 heads, 63 sectors/track, 17769 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 1 9 72261 de Dell Utility
    /dev/sda2 10 1054 8393962+ 8e Linux LVM
    /dev/sda3 * 1055 1080 208845 83 Linux
    /dev/sda4 1081 17769 134054392+ f W95 Ext'd (LBA)
    /dev/sda5 1081 1342 2104483+ 82 Linux swap / Solaris
    /dev/sda6 1343 17769 131949846 8e Linux LVM

    Disk /dev/sdb: 5994.7 GB, 5994700603392 bytes
    255 heads, 63 sectors/track, 728814 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot Start End Blocks Id System
    /dev/sdb1 1 267350 2147483647+ ee EFI GPT

    Disk /dev/dm-0: 4294 MB, 4294967296 bytes
    255 heads, 63 sectors/track, 522 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-0 doesn't contain a valid partition table

    Disk /dev/dm-1: 4294 MB, 4294967296 bytes
    255 heads, 63 sectors/track, 522 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-1 doesn't contain a valid partition table

    Disk /dev/dm-2: 4294 MB, 4294967296 bytes
    255 heads, 63 sectors/track, 522 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-2 doesn't contain a valid partition table

    Disk /dev/dm-3: 3221 MB, 3221225472 bytes
    255 heads, 63 sectors/track, 391 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-3 doesn't contain a valid partition table

    Disk /dev/dm-4: 8589 MB, 8589934592 bytes
    255 heads, 63 sectors/track, 1044 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-4 doesn't contain a valid partition table

    Disk /dev/dm-5: 3221 MB, 3221225472 bytes
    255 heads, 63 sectors/track, 391 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-5 doesn't contain a valid partition table

    Disk /dev/dm-6: 8594 MB, 8594128896 bytes
    255 heads, 63 sectors/track, 1044 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/dm-6 doesn't contain a valid partition table

    Disk /dev/sdc: 160.0 GB, 160037691392 bytes
    255 heads, 63 sectors/track, 19456 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot Start End Blocks Id System
    /dev/sdc1 1 19456 156280288+ 7 HPFS/NTFS


    the last device is the usb RD1000 that is automounting

  4. #4
    brassy NNTP User

    Default Re: rd1000

    hmmmmm...is this server hardware? did it come with SUSE on it?

    if so, i guess you are not running openSUSE but rather SUSE Enterprise
    Linux Server (SLES) or Desktop (SLED)

    you can find out for sure by, doing this in a terminal:

    cat /etc/SuSE-release

    *IF* you are running SLED/SLES then i highly recommend you ignore all
    advice here and ask again in the _real_ forum for Novell's
    _commercial_ offerings at forums.novell.com

    the reasons are many...well, yes openSUSE and SLED/SLES are related,
    but most folks here have never run the commercial version and there
    ARE some differences....and, second if you are getting regular updates
    then you have a service contract of some sort and at the VERY least
    you will be welcomed into their forums...

    all that said: your first post seems to ask where your internal rd1000
    is, and it seems clear to me (from the output of the mount command in
    your first posting) that it is an ntfs disk mounted on
    /media/RD1000-160GB as seen here:

    /dev/sdc1 on /media/RD1000-160GB type ntfs (rw,nosuid,nodev,uid=1000)

    i guess if you put this in a terminal
    cat /etc/fstab

    you will see the same there...

    and
    cat /etc/mtab

    will show it also

    ohhh...i have no idea about all of those "doesn't contain a valid
    partition table" in your second post...

    have fun!

    --
    brassy

  5. #5
    ottrose NNTP User

    Default Re: rd1000

    Your are right its Enterprise edition. it came with our dell. I will have to switch to the Novell forum. the RD1000 you see is the usb one. I did find it in dmesg using dmesg | grep RD1000. and the usb one was not plugged in on startup. Thanks for the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •