Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: opensuse 11.1 on laptops + hard lock

  1. #1
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Unhappy opensuse 11.1 on laptops + hard lock

    dear all,
    i have been using opensuse for a long time, and in my laptop opensuse 11.0 was worked fine, then i updated to 11.1 and it started showing strange behavior.
    (my laptop is acer ASPIRE 5052 NWXMI)

    here are the problems i face

    1.Most of the time there will be a hard lock, and i had to force off, by pressing the power button.
    2.sound become very low.

    fooling around with the first problem, by disabling some wireless modules, some how i managed to get the machine up

    i found that whenever i start X window, it makes a hard lock.
    so every time i had to push the powerbutton for 20 sec to switch of and reboot again.

    did anyone experienced a same kind of problems??
    funny thing is i installed suse11.1 to a new sony vaio laptop,
    (vaio VGNCS115J) as soon as installed cheese, it locked the X, for some time i could move the mouse. keyboard dead.
    and sound very low
    so i disabled wireless and webcam modules and graphics is up

    did anyone had the same problem?
    will installing the security update solve the problem?

    if needed, i can upload my lsmod, lspci and dmesg outputs.

    my next aim wil be to compile a custom kernel and if doesnt work i had to stick with slackware.

    please !! any help is appreciated
    regards

  2. #2
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    26,563
    Blog Entries
    38

    Default Re: opensuse 11.1 on laptops + hard lock

    I have openSUSE-11.1 running fine on my Dell Studio 15 laptop. No hard lockups.

    Could it be that you have a problem (in both cases) with your graphic driver, causing X not to come up properly? Do you get the hard lock with safe settings (fail safe) ?

  3. #3
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Default Re: opensuse 11.1 on laptops + hard lock

    thank you,
    oldcpu, that you responded to the thread.
    i dont feel like going to 11.0 again, so please help me out.

    Even 10.3 and 11.0 worked well on this laptop.
    i installed 11.0 on a dell machine, and everything worked, even the web cam.

    safe setting also caused hardlock in the vaio laptop, which is having an intel graphix

    my acer laptop has an ati graphics, here is the lspci
    Code:
    00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
    00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
    00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
    00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
    00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
    00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
    00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
    00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
    00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
    00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
    08:01.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
    08:01.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
    08:01.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
    08:01.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
    08:01.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
    08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    lsmod output
    Code:
    Module                  Size  Used by
    nls_iso8859_1           3768  1 
    nls_cp437               5432  1 
    vfat                    9764  1 
    fat                    46376  1 vfat
    usb_storage            86716  1 
    binfmt_misc             7872  1 
    snd_pcm_oss            43300  0 
    snd_mixer_oss          14288  1 snd_pcm_oss
    snd_seq                52248  0 
    snd_seq_device          7168  1 snd_seq
    ipv6                  242608  18 
    cpufreq_conservative     6360  0 
    cpufreq_userspace       3112  0 
    cpufreq_powersave       1640  0 
    powernow_k8            13776  1 
    fuse                   52488  1 
    loop                   15028  0 
    dm_mod                 62236  0 
    pcmcia                 32884  0 
    snd_hda_intel         413232  0 
    sdhci_pci               7452  0 
    yenta_socket           22884  1 
    8139too                23020  0 
    snd_pcm                79096  2 snd_pcm_oss,snd_hda_intel
    sdhci                  17436  1 sdhci_pci
    fglrx                1954300  0 
    8139cp                 19152  0 
    rtc_cmos               11488  0 
    snd_timer              21132  2 snd_seq,snd_pcm
    i2c_piix4              10148  0 
    rsrc_nonstatic         10936  1 yenta_socket
    sr_mod                 13536  0 
    mii                     4968  2 8139too,8139cp
    mmc_core               55088  1 sdhci
    pcspkr                  2344  0 
    button                  6560  0 
    battery                11156  0 
    rtc_core               18048  1 rtc_cmos
    ati_agp                 6652  0 
    k8temp                  4156  0 
    cdrom                  32288  1 sr_mod
    snd_page_alloc          8184  2 snd_hda_intel,snd_pcm
    wmi                     6720  0 
    ac                      4452  0 
    pcmcia_core            33208  3 pcmcia,yenta_socket,rsrc_nonstatic
    serio_raw               5092  0 
    i2c_core               29972  1 i2c_piix4
    snd_hwdep               7144  1 snd_hda_intel
    rtc_lib                 2816  1 rtc_core
    shpchp                 28280  0 
    agpgart                32564  2 fglrx,ati_agp
    pci_hotplug            27392  1 shpchp
    snd                    57408  8 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
    sg                     29376  0 
    soundcore               6900  1 snd
    usbhid                 45908  0 
    hid                    35784  1 usbhid
    ff_memless              7244  1 usbhid
    ehci_hcd               48260  0 
    ohci_hcd               31800  0 
    sd_mod                 31424  5 
    crc_t10dif              1704  1 sd_mod
    usbcore               167604  5 usb_storage,usbhid,ehci_hcd,ohci_hcd
    edd                     8616  0 
    reiserfs              221528  1 
    fan                     4712  0 
    ide_pci_generic         3428  0 
    atiixp                  3384  0 
    ide_core               99412  2 ide_pci_generic,atiixp
    ata_generic             4484  0 
    thermal                19916  0 
    processor              44060  2 powernow_k8,thermal
    thermal_sys            11364  3 fan,thermal,processor
    hwmon                   3092  2 k8temp,thermal_sys
    pata_atiixp             4560  0 
    sata_sil                7808  2 
    libata                161148  3 ata_generic,pata_atiixp,sata_sil
    scsi_mod              149804  5 usb_storage,sr_mod,sg,sd_mod,libata
    dock                   11988  1 libata
    regards

  4. #4
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Default Re: opensuse 11.1 on laptops + hard lock

    dmesg output
    Code:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
     BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003be90000 (usable)
     BIOS-e820: 000000003be90000 - 000000003be9c000 (ACPI data)
     BIOS-e820: 000000003be9c000 - 000000003bf00000 (ACPI NVS)
     BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
     BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    DMI present.
    last_pfn = 0x3be90 max_arch_pfn = 0x1000000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    kernel direct mapping tables up to 38000000 @ 7000-c000
    NX (Execute Disable) protection: active
    RAMDISK: 37a80000 - 37fef13c
    ACPI: RSDP 000F8A20, 0014 (r0 PTLTD )
    ACPI: RSDT 3BE94E78, 003C (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
    ACPI: FACP 3BE9BBDC, 0074 (r1 ATI    Bowfin    6040000 ATI     F4240)
    ACPI: DSDT 3BE94EB4, 6D28 (r1    ATI    SB460  6040000 MSFT  2000002)
    ACPI: FACS 3BE9CFC0, 0040
    ACPI: SSDT 3BE9BC50, 0182 (r1 PTLTD  POWERNOW  6040000  LTP        1)
    ACPI: APIC 3BE9BDD2, 0054 (r1 PTLTD  	 APIC    6040000  LTP        0)
    ACPI: MCFG 3BE9BE26, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
    ACPI: BOOT 3BE9BE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
    ACPI: SLIC 3BE9BE8A, 0176 (r1 ACRSYS ACRPRDCT  6040000 acer        0)
    ACPI: DMI detected: Acer
    ACPI: Local APIC address 0xfee00000
    NUMA - single node, flat memory mode
    Node: 0, start_pfn: 0, end_pfn: 3be90
      Setting physnode_map array to node 0 for pfns:
      0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 
    node 0 pfn: [0 - 3be90]
    Reserving 2560 pages of KVA for lmem_map of node 0 at 3b400
    remove_active_range (0, 242688, 245248)
    Reserving total of a00 pages for numa KVA remap
    kva_start_pfn ~ 37000 max_low_pfn ~ 38000
    max_pfn = 3be90
    62MB HIGHMEM available.
    896MB LOWMEM available.
    max_low_pfn = 38000, highstart_pfn = 38000
    Low memory ends at vaddr f8000000
    node 0 will remap to vaddr f7000000 - f7a00000
    allocate_pgdat: node 0 NODE_DATA f7000000
    remap_numa_kva: node 0
    remap_numa_kva: f7000000 to pfn 0003b400
    remap_numa_kva: f7200000 to pfn 0003b600
    remap_numa_kva: f7400000 to pfn 0003b800
    remap_numa_kva: f7600000 to pfn 0003ba00
    remap_numa_kva: f7800000 to pfn 0003bc00
    High memory starts at vaddr f8000000
      mapped low ram: 0 - 38000000
      low ram: 00000000 - 38000000
      bootmap 0000b000 - 00012000
    (11 early reservations) ==> bootmem [0000000000 - 0038000000]
      #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
      #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
      #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
      #3 [0000100000 - 000066c45c]    TEXT DATA BSS ==> [0000100000 - 000066c45c]
      #4 [0037a80000 - 0037fef13c]          RAMDISK ==> [0037a80000 - 0037fef13c]
      #5 [000066d000 - 0000675000]    INIT_PG_TABLE ==> [000066d000 - 0000675000]
      #6 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
      #7 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
      #8 [003b400000 - 003be00000]          KVA RAM
      #9 [0037000000 - 0037a00000]           KVA PG ==> [0037000000 - 0037a00000]
      #10 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
    found SMP MP-table at [c00f8a50] 000f8a50
    Zone PFN ranges:
      DMA      0x00000000 -> 0x00001000
      Normal   0x00001000 -> 0x00038000
      HighMem  0x00038000 -> 0x0003be90
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
        0: 0x00000000 -> 0x0000009d
        0: 0x00000100 -> 0x0003b400
        0: 0x0003be00 -> 0x0003be90
    On node 0 totalpages: 242733
    free_area_init_node: node 0, pgdat f7000000, node_mem_map f7002000
      DMA zone: 3961 pages, LIFO batch:0
      Normal zone: 223300 pages, LIFO batch:31
      HighMem zone: 13315 pages, LIFO batch:3
    Using APIC driver default
    SB4X0 revision 0x83
    Ignoring ACPI timer override.
    If you got timer trouble try acpi_use_timer_override
    Detected use of extended apic ids on hypertransport bus
    ACPI: PM-Timer IO Port: 0x8008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
    PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
    Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    PERCPU: Allocating 39708 bytes of per cpu data
    NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 8
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 240576
    Policy zone: HighMem
    Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HTS541612J9SA00_SB2D04E4GXWMSE-part7  vga=0x317
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 1599.956 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Initializing HighMem for node 0 (00038000:0003be90)
    Memory: 948604k/981568k available (2396k kernel code, 22324k reserved, 1959k data, 328k init, 53824k highmem)
    virtual kernel memory layout:
        fixmap  : 0xff8b6000 - 0xfffff000   (7460 kB)
        pkmap   : 0xff400000 - 0xff600000   (2048 kB)
        vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
        lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
          .init : 0xc0548000 - 0xc059a000   ( 328 kB)
          .data : 0xc03571ab - 0xc0540f88   (1959 kB)
          .text : 0xc0100000 - 0xc03571ab   (2396 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399824)
    kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
    Security Framework initialized
    SELinux:  Disabled at boot.
    AppArmor: AppArmor initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU 0(2) -> Core 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using C1E aware idle routine
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    Parsing all Control Methods:
    Table [DSDT](id 0001) - 905 Objects with 58 Devices 202 Methods 29 Regions
    Parsing all Control Methods:
    Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
     tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
    evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
    Mapping cpu 0 to node 0
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
    Booting processor 1/1 ip 6000
    Initializing CPU#1
    Mapping cpu 1 to node 0
    Calibrating delay using timer specific routine.. 3200.18 BogoMIPS (lpj=6400379)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU 1(2) -> Core 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
    System has AMD C1E enabled
    Brought up 2 CPUs
    Switch to broadcast mode on CPU0
    Total of 2 processors activated (6400.10 BogoMIPS).
    CPU0 attaching sched-domain:
     domain 0: span 0-1 level CPU
      groups: 0 1
      domain 1: span 0-1 level NODE
       groups: 0-1
    CPU1 attaching sched-domain:
     domain 0: span 0-1 level CPU
      groups: 1 0
      domain 1: span 0-1 level NODE
       groups: 0-1
    Switch to broadcast mode on CPU1
    net_namespace: 1044 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    mtrr: your CPUs had inconsistent fixed MTRR settings
    mtrr: probably your BIOS does not setup all CPUs.
    mtrr: corrected configuration.
    evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
    ACPI: EC: Look up EC in DSDT
    Completing Region/Field/Buffer/Package initialization:.........................................................................................................................................
    Initialized 24/29 Regions 47/47 Fields 34/35 Buffers 32/33 Packages (922 nodes)
    Initializing Device/Processor/Thermal objects by executing _INI methods:...
    Executed 3 _INI methods requiring 0 _STA executions (examined 63 objects)
    evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 2 Runtime GPEs in this block
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:05.0: PME# disabled
    pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    PCI: 0000:00:12.0 reg 10 io port: [8440, 8447]
    PCI: 0000:00:12.0 reg 14 io port: [8434, 8437]
    PCI: 0000:00:12.0 reg 18 io port: [8438, 843f]
    PCI: 0000:00:12.0 reg 1c io port: [8430, 8433]
    PCI: 0000:00:12.0 reg 20 io port: [8400, 840f]
    PCI: 0000:00:12.0 reg 24 32bit mmio: [d0004000, d00041ff]
    PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 7ffff]
    pci 0000:00:12.0: supports D1
    pci 0000:00:12.0: supports D2
    PCI: 0000:00:13.0 reg 10 32bit mmio: [d0005000, d0005fff]
    PCI: 0000:00:13.1 reg 10 32bit mmio: [d0006000, d0006fff]
    PCI: 0000:00:13.2 reg 10 32bit mmio: [d0007000, d0007fff]
    pci 0000:00:13.2: supports D1
    pci 0000:00:13.2: supports D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.2: PME# disabled
    PCI: 0000:00:14.0 reg 10 io port: [8410, 841f]
    PCI: 0000:00:14.0 reg 14 32bit mmio: [fed00000, fed003ff]
    HPET not enabled in BIOS. You might try hpet=force boot option
    PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
    PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
    PCI: 0000:00:14.1 reg 18 io port: [0, 7]
    PCI: 0000:00:14.1 reg 1c io port: [0, 3]
    PCI: 0000:00:14.1 reg 20 io port: [8420, 842f]
    PCI: 0000:00:14.2 reg 10 64bit mmio: [d0000000, d0003fff]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.2: PME# disabled
    PCI: 0000:01:05.0 reg 10 32bit mmio: [d4000000, d7ffffff]
    PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
    PCI: 0000:01:05.0 reg 18 32bit mmio: [d0100000, d010ffff]
    PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:05.0: supports D1
    pci 0000:01:05.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [d0100000, d01fffff]
    PCI: bridge 0000:00:01.0 64bit mmio pref: [d4000000, d7ffffff]
    PCI: bridge 0000:00:04.0 io port: [0, fff]
    PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:05.0 io port: [0, fff]
    PCI: bridge 0000:00:05.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:06.0 io port: [0, fff]
    PCI: bridge 0000:00:06.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:07.0 io port: [0, fff]
    PCI: bridge 0000:00:07.0 32bit mmio: [0, fffff]
    PCI: 0000:08:01.0 reg 10 32bit mmio: [d0210000, d0210fff]
    pci 0000:08:01.0: supports D1
    pci 0000:08:01.0: supports D2
    pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:01.0: PME# disabled
    PCI: 0000:08:01.1 reg 10 32bit mmio: [d0211000, d021107f]
    pci 0000:08:01.1: supports D1
    pci 0000:08:01.1: supports D2
    pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot
    pci 0000:08:01.1: PME# disabled
    PCI: 0000:08:01.2 reg 10 32bit mmio: [d0211400, d02114ff]
    pci 0000:08:01.2: supports D1
    pci 0000:08:01.2: supports D2
    pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:08:01.2: PME# disabled
    PCI: 0000:08:01.3 reg 10 32bit mmio: [d0211800, d021187f]
    pci 0000:08:01.3: supports D1
    pci 0000:08:01.3: supports D2
    pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot
    pci 0000:08:01.3: PME# disabled
    PCI: 0000:08:01.4 reg 10 32bit mmio: [0, ff]
    pci 0000:08:01.4: supports D1
    pci 0000:08:01.4: supports D2
    pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot
    pci 0000:08:01.4: PME# disabled
    PCI: 0000:08:02.0 reg 10 io port: [a000, a0ff]
    PCI: 0000:08:02.0 reg 14 32bit mmio: [d0211c00, d0211cff]
    pci 0000:08:02.0: supports D1
    pci 0000:08:02.0: supports D2
    pci 0000:08:02.0: PME# supported from D1 D2 D3hot D3cold
    pci 0000:08:02.0: PME# disabled
    PCI: 0000:08:04.0 reg 10 32bit mmio: [d0200000, d020ffff]
    pci 0000:00:14.4: transparent bridge
    PCI: bridge 0000:00:14.4 io port: [a000, afff]
    PCI: bridge 0000:00:14.4 32bit mmio: [d0200000, d02fffff]

  5. #5
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Default Re: opensuse 11.1 on laptops + hard lock

    Code:
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    
    
    pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:06.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x2e-0x2f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x68-0x6f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x220-0x22f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x530-0x537) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:08: io resource (0x87f-0x87f) overlaps 0000:00:07.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:07.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
    pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
    pnp: PnP ACPI: found 10 devices

  6. #6
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Default Re: opensuse 11.1 on laptops + hard lock

    sometimes, when i pressed the power button, it got hard lock. i think there is a problem with acpi too

  7. #7
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    26,563
    Blog Entries
    38

    Default Re: opensuse 11.1 on laptops + hard lock

    I am just a regular user, and by no means am I knowledgeable in this area.

    But what might help the knowledgeable users, is for each of your laptops with this problem, for you to list:
    a. laptop model/manuf # (which you have)
    b. graphics (ie manufact/model# - don't force users trying to help to dig into your lspci if you can give a quick summary)
    c. what graphic driver you are using (vesa? openGL ? proprietary? and if proprietary, then what version ? )
    d. anything non-stock that you may have done to xorg ...
    e. which desktop you are using, and anything non-stock that you may have done to your desktop (such as updating kde-4.1.3 to 4.x or something like that).

  8. #8

    Default Re: opensuse 11.1 on laptops + hard lock

    hi,
    while installing opensuse 11.1(openSUSE-11.1-DVD-x86_64.iso),only the welcome screen comes and then the system hangs.....
    i pressed Ctrl+Alt+F2 ....the cursor stop after the line....
    starting udev... udevd-event[71]: "sbin/modprobe" abnormal exit
    .....

    i tried to reinstall it ,but this time i changed the kernel option from DEFAULT to NO ACPI...
    everything was working fine ....,i aborted the installation to find out the consequences of installing opensuse 11.1 with NO ACPI....

    if possible can u tell me my present problems with MODPROBE ,ACPI.....and how could i solve them....

    My system configuration....
    ASPIRE 5052nmxmi
    AMD TURION 64X2 MOBILE TECHNOLOGY
    ATI RADEON Xpress 1100
    1GB RAM

    THANKS IN ADVANCE......

  9. #9

    Default Re: opensuse 11.1 on laptops + hard lock

    plz help me slove this problem....

  10. #10
    Join Date
    Feb 2009
    Location
    india
    Posts
    26

    Talking solved!!

    thank you all
    finally i figured out the problem.
    when i tried a new account it worked

    first i checked with root account and then i found that it wasnt hardlocking. so i created a new account and there is no more hard lock.

    probably some configuration file in home dir might have caused the problem. or some temporary files in /tmp corresponding to the user might have caused the problem.

    now i am happy

Page 1 of 4 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •