Unable to update Suse 11

[Ingvar tc]

Hello all,

I'm running into a problem with updates. I have a yellow triangle where
the update button should be and I get the following message when I press
it:

Problem loading data from '/11.1/repo/oss' Error reading solv-file:
/var/cache/zypp/solv/_11.1_repo_oss/solv Try 'zypper refresh', or even
'zypper clean -m' before doing so.

There are many more lines similar to this one in the message,
apparently for each for each repository.
I followed the instructions given here to the best of my ability. I
opened a "run command" window, switched user to root, and checked "run
in a terminal window". Then I ran "zypper refresh" first and "zypper
clean-m" second. They had no noticeable effect. On my last successful
update there was a message that popped up about updating Yast and some
instructions but I didn't get a chance to read them. I get a different
error when I log into the Yast control centre and click on "online
update": "error while creating client module online update". Any help
would be appreciated. Thanks in advance.

Ingvar


--
Ingvar_tc
------------------------------------------------------------------------
Ingvar_tc's Profile: http://forums.opensuse.org/member.php?userid=15824
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[caf4926]

We can assume you have an active internet connection??

Use zypper in a terminal again
but first do this

rpmdb --rebuilddb

now

zypper ref

zypper up

What does it do?


--
Box: Linux 2.6.25.18-0.2 x86_64 | OS 11.0 | (KDE4.1.86) "5.1" | M2N4-SLI
| AMD 64 X2 5200+ | nVidia 8500GT | 2GB RAM
http://tinyurl.com/985fp2
------------------------------------------------------------------------
caf4926's Profile: http://forums.opensuse.org/member.php?userid=204
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[Ingvar tc]

Hello Caf4296

Thanks for the reply. Yes I am connected to the Internet. I think it
may be useful for you to assume I know almost nothing, because that is
close to true, especially when it comes to Linux. I did what you
instructed. It seems to do nothing.I opened a terminal program window
(Konsole) from the start button, then switched user (su root) and typed
my password. Then I cut and pasted the first command you gave in your
reply. It did nothing. But I tried the other two and still nothing
happened. ,,,,,



Well, I need to change that. Something is happening now. It just
refreshed my repositories it seems. I'm getting the message in the
terminal window. I also ran the commands by right clicking on the
desktop and using the "run command" option. I have always assumed that
was basically the same as running Konsole. Not sure if that is true
though. Right now the Konsole window is displaying a Java license
window. It may be downloading something also. I'm not sure. Actually, it
is downloading stuff.I just figured out how to get past the license.
I'll just post this for now. Thanks again for your reply.

Ingvar


--
Ingvar_tc
------------------------------------------------------------------------
Ingvar_tc's Profile: http://forums.opensuse.org/member.php?userid=15824
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[caf4926]

Let us know how you get on

FYI

zypper up (= update)

'Zypper/Usage/11.1 - openSUSE' (http://en.opensuse.org/Zypper/Usage)


--
Box: Linux 2.6.25.18-0.2 x86_64 | OS 11.0 | (KDE4.1.86) "5.1" | M2N4-SLI
| AMD 64 X2 5200+ | nVidia 8500GT | 2GB RAM
http://tinyurl.com/985fp2
------------------------------------------------------------------------
caf4926's Profile: http://forums.opensuse.org/member.php?userid=204
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[Ingvar tc]

Thank you again.It seems to be a very big update. Could I be updating to
11.1? It's not what I planned for the night but I can do it.I had
started this evening with 11.0 and didn't feel any need to update it
particularly. But it's not a disaster or anything. I had planned to back
things up before I upgraded, that's all. I dual boot so most of my
important stuff is also on my windows partition.

Ingvar


--
Ingvar_tc
------------------------------------------------------------------------
Ingvar_tc's Profile: http://forums.opensuse.org/member.php?userid=15824
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[caf4926]

Don't try and stop it now.

The update? well that will depend on your enabled repo's.

we have to assume you know what you are doing here.

If this is a fresh install of 11.0
Then expect a BIG update.


--
Box: Linux 2.6.25.18-0.2 x86_64 | OS 11.0 | (KDE4.1.86) "5.1" | M2N4-SLI
| AMD 64 X2 5200+ | nVidia 8500GT | 2GB RAM
http://tinyurl.com/985fp2
------------------------------------------------------------------------
caf4926's Profile: http://forums.opensuse.org/member.php?userid=204
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[Ingvar tc]

Ok,,,,. I don't think you can assume that I know what I'm doing. I had a
few repositories added in for 11.1, but not all the necessary ones from
what I understood. I was hoping at one point for it to upgrade
automatically but when it didn't work I gave up. I just assumed Suse
wouldn't do anything as big as upgrading to 11.1 without telling me
clearly and distinctly that it was doing specifically that.

Well, never mind. I've hit a snag. Here's the error message:

Abort, retry, ignore? [A/r/i]: r
Installing: libavfilter0-0.4.9.16144-1.1 [error]
Installation of libavfilter0-0.4.9.16144-1.1 failed:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed:
error: open of /var/cache/zypp/packages/VideoLan failed: No such file or
directory
error: open of Repository/i586/libavfilter0-0.4.9.16144-1.1.i586.rpm
failed: No such file or directory


Abort, retry, ignore? [A/r/i]:


I've done retry once twice to no effect, but it's Videolan. I don't
think there is anything crucial on that repository. So I think ignore
would be safe for now. What should I do? It looks like something I can
probably get later.

Ingvar


--
Ingvar_tc
------------------------------------------------------------------------
Ingvar_tc's Profile: http://forums.opensuse.org/member.php?userid=15824
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[caf4926]

OK. This does not sound so good now. Yes, skip.

But having 11.1 repos and 11.0 together !

It is possible to update but not like this.

Let it run and see. Are you running in X? You know - a desktop GUI?


--
Box: Linux 2.6.25.18-0.2 x86_64 | OS 11.0 | (KDE4.1.86) "5.1" | M2N4-SLI
| AMD 64 X2 5200+ | nVidia 8500GT | 2GB RAM
http://tinyurl.com/985fp2
------------------------------------------------------------------------
caf4926's Profile: http://forums.opensuse.org/member.php?userid=204
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[Ingvar tc]

Yes, I'm running KDE, if I understand your question. My computer is
running well. I'm surfing the net, reading, and checking on the progress
of things as we speak. I'm posting this on the computer that is
"updating". I have a good fast Internet connection sometimes 600 or more
k per second. So whatever is happening is happening.

Ingvar


--
Ingvar_tc
------------------------------------------------------------------------
Ingvar_tc's Profile: http://forums.opensuse.org/member.php?userid=15824
View this thread: http://forums.opensuse.org/showthread.php?t=403551

[caf4926]

Fine leave it to run
Don't reboot

When it finishes - see if you can open Yast - Software Repositories

you need to end up with either all 11.0 or 11.1 - Not a mix.

If you decide to go for 11.1 (fine)
Put in the equivalent of the 11.0 ones you have

When done you need to press
Ctrl-Alt-F1
login as root at the CLI

then type:
init 3
(hit the enter key once then again)

You are logged in as root to level3 so now do

zypper ref

then

zypper dup

when done reboot
and hope


--
Box: Linux 2.6.25.18-0.2 x86_64 | OS 11.0 | (KDE4.1.86) "5.1" | M2N4-SLI
| AMD 64 X2 5200+ | nVidia 8500GT | 2GB RAM
http://tinyurl.com/985fp2
------------------------------------------------------------------------
caf4926's Profile: http://forums.opensuse.org/member.php?userid=204
View this thread: http://forums.opensuse.org/showthread.php?t=403551