Results 1 to 7 of 7

Thread: [growisofs]howto burn cd!!!

  1. #1
    Join Date
    Jul 2008
    Location
    ukraine/mk/pervomaysk
    Posts
    528

    Default [growisofs]howto burn cd!!!

    hi all
    i have one more question with growisofs command line burning tool

    so i could burn the some.iso iso9660 image to dvd +-rw media but i could not cd
    i offten burn dvd with this command

    growisofs -Z /dev/sr0=some.iso

    but when i put in dvd writer cdrw media it returnes with

    > growisofs -Z /dev/sr0=some.iso
    :-( /dev/sr0: media is not recognized as recordable DVD: 0
    or
    :-( /dev/sr0: media is not recognized as recordable DVD: A

    is in growisofs program something special to burn cdr(w) images
    intelGMA3100#amd|radeonHD4200+radeonHD5450@catalyst12.4
    WC5020B,PagePro1480MF,LBP2900,hpCP1510,PHOTO1290,Scanmaker3600,PerfectionV200

  2. #2
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: [growisofs]howto burn cd!!!

    DVD rewritable and CD rewritable media differ in characteristics. For one thing you will notice that DVD+-RW is purple while CD-RW is pale gold/silver (partly depends on the backing colour). Different dyes. CD-RW has to be blanked first, DVD+-RW doesn't; you can just overwrite the existing data. A format of a DVD+-RW is possible but normally not needed or recommended.

    So for blanking/writing CD-RW the CLI program to use is wodim, not growisofs.

    If you were using k3b or brasero these details would have been taken care of for you.

  3. #3
    Join Date
    Jul 2008
    Location
    ukraine/mk/pervomaysk
    Posts
    528

    Default Re: [growisofs]howto burn cd!!!

    Hi, ken_yap
    one more time thank you for your reply...
    cdrw is seems to be blanked... when I put it in dvdrw drive, nautilus window appears with burn:///

    ok, I blank one more with wodim blank=all command

    it now blanks...
    intelGMA3100#amd|radeonHD4200+radeonHD5450@catalyst12.4
    WC5020B,PagePro1480MF,LBP2900,hpCP1510,PHOTO1290,Scanmaker3600,PerfectionV200

  4. #4
    Join Date
    Jul 2008
    Location
    ukraine/mk/pervomaysk
    Posts
    528

    Default Re: [growisofs]howto burn cd!!!

    Code:
    > wodim blank=all
    wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.Device was not specified. Trying to find an appropriate drive...
    Detected CD-R drive: /dev/sr0
    Device type    : Removable CD-ROM
    Version        : 5
    Response Format: 2
    Capabilities   : 
    Vendor_info    : 'HL-DT-ST'
    Identification : 'DVD-RAM GSA-H55L'
    Revision       : '1.03'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
    Driver flags   : MMC-3 SWABAUDIO BURNFREE 
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Speed set to 1764 KB/s
    Starting to write CD/DVD at speed  10.0 in real BLANK mode for single session.
    Last chance to quit, starting real write in    0 seconds. Operation starts.
    >
    > ls -lh my*
    -rw-r--r-- 1 [user] users 674M Ноя  7 12:22 myisoimage.iso
    > growisofs -Z /dev/sr0=myisoimage.iso
    :-( /dev/sr0: media is not recognized as recordable DVD: A
    >
    the problem is here and same... I have no idea to solve the problem...
    intelGMA3100#amd|radeonHD4200+radeonHD5450@catalyst12.4
    WC5020B,PagePro1480MF,LBP2900,hpCP1510,PHOTO1290,Scanmaker3600,PerfectionV200

  5. #5
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: [growisofs]howto burn cd!!!

    Most of the time you don't need blank=all, blank=fast will do. Only when the calibration area is used up do you need to clear it with blank=all. Again this is something k3b takes care of for you.

    You need to use wodim to do both the blanking and the writing. Don't use growisofs for CDs.

  6. #6
    Join Date
    Jul 2008
    Location
    ukraine/mk/pervomaysk
    Posts
    528

    Default Re: [growisofs]howto burn cd!!!

    thank you
    i understand... i should use only wodim for writing cd's from command line...
    ok...
    --
    cheers
    intelGMA3100#amd|radeonHD4200+radeonHD5450@catalyst12.4
    WC5020B,PagePro1480MF,LBP2900,hpCP1510,PHOTO1290,Scanmaker3600,PerfectionV200

  7. #7
    Join Date
    Jul 2008
    Location
    ukraine/mk/pervomaysk
    Posts
    528

    Default Re: [growisofs]howto burn cd!!!

    i want to add some more
    i hope this helps somebody

    wodim myisoimage.iso

    this burn my CD from image myisoimage.iso

    it simple when you know
    intelGMA3100#amd|radeonHD4200+radeonHD5450@catalyst12.4
    WC5020B,PagePro1480MF,LBP2900,hpCP1510,PHOTO1290,Scanmaker3600,PerfectionV200

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •