Results 1 to 2 of 2

Thread: Trouble in Installing Request racker 3.6

  1. #1
    mysuselove NNTP User

    Smile Trouble in Installing Request racker 3.6

    Hi I am new to linux and learning it. Currently I have task to install the RT-3.6 in my openSuse 10.3. I tried installing the dependent perl modules and got stuck . here are the details.

    OS -- OpenSuse 10.3 .
    RT -- Version is 3.6.6

    STEP:1 --> I xtracted the software in /tmp folder and ran the command ./configure. and it went smoothly.

    STEP:2 --> Then I ran the "make testdeps" as in the installation guide and it showed both missing and found dependencies.

    Bandtel2:/tmp/rt-3.6.6 # make testdeps
    /usr/bin/perl ./sbin/rt-test-dependencies --verbose --with-mysql
    perl:
    >=5.8.3(5.00800...found
    users:
    rt group (www)...found
    bin owner (root)...found
    libs owner (root)...found
    libs group (bin)...found
    web owner (nobody)...found
    web group (www)...found
    CLI dependencies:
    Term::ReadKey...found
    Getopt::Long >=2.24...found
    HTTP::Request::Common...found
    Term::ReadLine...found
    Text:arseWords...found
    LWP...found
    CORE dependencies:
    Scalar::Util...found
    HTML::Scrubber >=0.08...found
    Class::ReturnValue >=0.40...found
    Text::Quoted 2.02...MISSING
    File::Spec >=0.8...found
    Calendar::Simple ...MISSING
    DBIx::SearchBuilder 1.50...MISSING
    ***************************************
    rest are omitted for brevity

    while I am trying to install the Text::Quoted I found that it depend on Text::Autoformat which in turn depend on Text::Reform .

    I installed Text::reform without any problem. When I tried to install the Text::Autoformat it gave an error that "break_at " was not exported by Text::reform . I tried to fix it after googling how to fix it but unable to do so.

    ************************************
    Below are the CLI details:

    But when I tried again to install the Text-Autoformat I got an error message which is pasted here for you view.

    noc2@Bandtel2:~/Desktop/Text-Autoformat-1.12> make test
    PERL_DL_NONLAZY=1 /usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
    1..1
    "break_at" is not exported by the Text::Reform module
    Can't continue after import errors at /usr/lib/perl5/site_perl/5.8.8/Text/Reform.pm line 43
    BEGIN failed--compilation aborted at blib/lib/Text/Autoformat.pm line 9.
    Compilation failed in require at test.pl line 13.
    BEGIN failed--compilation aborted at test.pl line 13.
    not ok 1
    make: *** [test_dynamic] Error 255


    --> I tried googling and tried to relplace the Reform.pm of Text-Reform 1.10 with the same version from CPAN and again with that of the Text-Reform-1.11 but failed on both occassion.

    ***************************

    FYI I have pasted the README file of the RT package below

    RT is an enterprise-grade issue tracking system. It allows organizations
    to keep track of what needs to get done, who is working on which tasks,
    what's already been done, and when tasks were (or weren't) completed.

    RT doesn't cost anything to use, no matter how much you use it; it
    is freely available under the terms of Version 2 of the GNU General
    Public License.

    RT is commercially-supported software. To purchase support, training,
    custom development, or professional services, please get in touch with
    us at sales@bestpractical.com.

    Jesse Vincent
    Best Practical Solutions, LLC
    March, 2005


    REQUIRED PACKAGES:
    ------------------

    o Perl 5.8.3 or later (Perl.com: The Source for Perl -- perl development, conferences).

    Perl versions prior to 5.8.3 contain bugs that could result
    in data corruption. We recommend strongly that you use 5.8.3
    or newer.

    o A supported SQL database

    Currently supported: Mysql 4.0.13 or later with InnoDB support.
    Postgres 7.2 or later.
    Oracle 9iR2 or later.
    SQLite 3.0. (Not recommended for production)

    o Apache version 1.3.x or 2.x (Welcome! - The Apache HTTP Server Project)
    with mod_perl -- (mod_perl: Welcome to the mod_perl world )
    or a webserver with FastCGI support (FastCGI Home)

    Compiling mod_perl on Apache 1.3.x as a DSO has been known
    to have massive stability problems and is not recommended.

    mod_perl 1.x must be built with EVERYTHING=1

    RT's FastCGI handler needs to access RT's configuration file.

    o Various and sundry perl modules
    A tool included with RT takes care of the installation of
    most of these automatically during the install process.

    The tool supplied with RT uses Perl's CPAN system
    (CPAN) to install modules. Some operating
    systems package all or some of the modules required, and
    you may be better off installing the modules that way.


    GENERAL INSTALLATION
    --------------------

    This is a rough guide to installing RT. For more detail, you'll
    want to read a more comprehensive installation guide at:

    InstallationGuides - RT Wiki

    1 Unpack this distribution other than where you want to install RT

    To do this cleanly, run the following command:

    tar xzvf rt.tar.gz -C /tmp

    2 Run the "configure" script.

    ./configure --help to see the list of options
    ./configure (with the flags you want)

    RT defaults to installing in /opt/rt3 with MySQL as its database. It
    tries to guess which of www-data, www, apache or nobody your webserver
    will run as, but you can override that behavior.

    3 Make sure that RT has everything it needs to run.

    Check for missing dependencies by running:

    make testdeps

    4 If the script reports any missing dependencies, install them by hand
    or run the following command as a user who has permission to install perl
    modules on your system:

    make fixdeps

    5 Check to make sure everything was installed properly.

    make testdeps

    It might sometimes be necessary to run "make fixdeps" several times
    to install all necessary perl modules.

    6 If this is a new installation:

    As a user with permission to install RT in your chosen directory, type:

    make install

    Set up etc/RT_SiteConfig.pm in your RT installation directory.
    You'll need to add any values you need to change from the defaults
    in etc/RT_Config.pm

    As a user with permission to read RT's configuration file, type:

    make initialize-database

    If the make fails, type:

    make dropdb

    and start over from step 6

    REST OF THE FILE ARE OMMITED FOR BREVITY

    ***********************************

    Is there any RPM package available for RT-3.6. or do we have to install it manually.

    I am blind from here and any help to proceed further would be appreciated

    Thanks and Regards
    mysuselove

    mysuselove is online now Report Post Reply With Quote

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,326
    Blog Entries
    15

    Default Re: Trouble in Installing Request racker 3.6

    Quote Originally Posted by mysuselove
    Hi I am new to linux and learning it. Currently I have task to install
    the RT-3.6 in my openSuse 10.3. I tried installing the dependent perl
    modules and got stuck . here are the details.

    OS -- OpenSuse 10.3 .
    RT -- Version is 3.6.6
    <big snip>
    Hi
    Why not just run cpan from the cli and install them that way, then you
    shouldn't get any dependency problems.

    --
    Cheers Malcolm (Linux Counter #276890)
    openSUSE 11.0 x86 Kernel 2.6.25.11-0.1-default
    up 0:03, 1 user, load average: 1.05, 1.12, 0.50
    GPU GeForce 6600 TE/6200 TE - Driver Version: 173.14.12


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •