Results 1 to 8 of 8

Thread: Konfuguration of USB-DVB-T

  1. #1

    Default Konfuguration of USB-DVB-T

    Does anyone know how to make a Terratec "Cinergy DT USB XS" run on SUSE 11.0. Are there somewhere useful configuration guidelines that even a linux-newbie can handle? Thanks !!

  2. #2
    Join Date
    Mar 2008
    Location
    Bochum, Germany
    Posts
    3,587

    Default Re: Konfuguration of USB-DVB-T

    * sep57u60,

    check http://www.linuxtv.org/wiki/index.ph...B_XS_Diversity

    There's a good chance that the driver is in the kernel being used with Opensuse 11, but make sure you get the firmware.

    Uwe

  3. #3

    Default Re: Konfuguration of USB-DVB-T

    Thats the page I used. By executing the 'make' I get the following message:
    make -C /home/v4l-dvb/v4l
    make[1]: Entering directory `/home/v4l-dvb/v4l'
    creating symbolic links...
    Kernel build directory is /lib/modules/2.6.25.11-0.1-pae/build
    make -C /lib/modules/2.6.25.11-0.1-pae/build SUBDIRS=/home/dwebert/v4l-dvb/v4l modules
    make: Entering an unknown directory
    make: *** /lib/modules/2.6.25.11-0.1-pae/build: No such file or directory. Stop.
    make: Leaving an unknown directory
    make[1]: *** [default] Fehler 2
    make[1]: Leaving directory `/home/v4l-dvb/v4l'
    make: *** [all] Fehler 2

    Either the guide is not correct or something else must be configured beforehand.

  4. #4
    Join Date
    Jun 2008
    Location
    Finland, European Union
    Posts
    1,879

    Default Re: Konfuguration of USB-DVB-T

    Install kernel-source.

  5. #5

    Default Re: Konfuguration of USB-DVB-T

    kernel-source is already installed !!

  6. #6
    Join Date
    Jun 2008
    Location
    Brisbane Australia
    Posts
    30

    Default Re: Konfuguration of USB-DVB-T

    Dont rush off to compile drivers. Check to make sure that you have fireware installed first. My PCI card needed the firmware to get going and was not recognized by YAST first up. The drivers with SUSE11 are upto date

  7. #7

    Default Re: Konfuguration of USB-DVB-T

    Do you have this stick running on your machine?

  8. #8
    Join Date
    Jun 2008
    Location
    Brisbane Australia
    Posts
    30

    Default Re: Konfuguration of USB-DVB-T

    No my card is a PCI unit that creates its own USB connection - a Huppaguage twin HDTV card. It just needed firmware to get it up and running. I suspect that you will need the same as the firmware will not be "open" and therefor cannot be provided with openSUSE. I got mine from LinuxTV.org - Television with Linux

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •