Results 1 to 2 of 2

Thread: SUSE 11 RAID 0

Hybrid View

  1. #1
    direktor_sv3mira NNTP User

    Default SUSE 11 RAID 0

    Hi,

    I'm installing SuSe11 on my configuration (asus p5e mobo).
    I have 4HDs. 2 of which are set up to raid 0 (BIOS setup).
    When I install suse it prompts me with a warning that it needs to have a boot partition in order to boot normaly. So the config is: / partition is on the raid, so is the /boot.
    /home partition is on one of the other drives (non raid).

    When install finishes, it boots the OS (without restarting) and it works fine. Problem is when I reboot the system i get the generic "no system found insert bootable disk and press any key).

    So ,obviously, the boot loader does not get installed as it should. When i try fixing the system using suse's DVD repair system feature, it scans my harddrives and says "no proper root partition found" (or something like that)


    So the problem is: system gets installed fine, starts normaly for the first time, but on the first reboot the ***** hits the fan and all goes to hell.

    Am I misconfiguring my RAID?

  2. #2

    Default Re: SUSE 11 RAID 0

    I would recommend putting the boot partition on a partition other than the raid. And install your bootloader on the boot sector of that partition.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •