Results 1 to 3 of 3

Thread: Trying to update 10.3 to 11.0, setup can't detect Linux

Hybrid View

  1. #1

    Default Trying to update 10.3 to 11.0, setup can't detect Linux

    Hi
    I have a MSI P35 Neo2 motherboard.
    I'm running Intel Matrix Storage Manager RAID,
    I have two disks as RAID 1 and two disks as RAID 0.

    On the RAID 1 disk I have a Windows XP partition and a Linux ext3 partition where openSUSE 10.3 is installed.

    I want to update 10.3 to 11.0 but when I run the installation from the DVD it doesn't find anything to update, if I select an option called show all or something like that it shows a bunch of partitions and disk named Unknown and then Unknown Linux (ext3) and so on. So the installation cannot continue. What can I do to troubleshoot this?

    Thanks.

  2. #2
    Join Date
    Jun 2008
    Location
    Finland, European Union
    Posts
    1,879

    Default Re: Trying to update 10.3 to 11.0, setup can't detect Linux

    Can you boot to your existing 10.3 installation and check what drivers have been loaded?

    Perhaps the Intel Matrix driver needs to be loaded in the 11.0 upgrade for it to detect the drives properly.

  3. #3

    Default Re: Trying to update 10.3 to 11.0, setup can't detect Linux

    I didn't have to load any drivers when I installed 10.3.


    This is the output of lsmod

    Module Size Used by
    joydev 15616 0
    xt_tcpudp 7808 4
    xt_pkttype 6400 3
    ipt_LOG 10752 9
    xt_limit 7552 9
    bridge 61864 1
    netbk 101024 0 [permanent]
    netloop 11520 0
    blkbk 28600 0 [permanent]
    blktap 123732 2 [permanent]
    xenbus_be 8832 3 netbk,blkbk,blktap
    edd 14472 0
    snd_pcm_oss 55552 0
    snd_mixer_oss 21888 1 snd_pcm_oss
    snd_seq 62960 0
    snd_seq_device 13332 1 snd_seq
    af_packet 32396 2
    ipt_REJECT 9216 3
    xt_state 7040 4
    iptable_mangle 7424 0
    iptable_nat 12292 0
    nf_nat 25388 1 iptable_nat
    iptable_filter 7552 1
    nf_conntrack_ipv4 16528 6 iptable_nat
    nf_conntrack 71900 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
    nfnetlink 10936 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
    ip_tables 24792 3 iptable_mangle,iptable_nat,iptable_filter
    ip6_tables 18888 0
    x_tables 24584 9 xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
    microcode 8844 0
    firmware_class 15232 1 microcode
    binfmt_misc 17164 1
    apparmor 46256 0
    nls_utf8 6528 3
    ntfs 196944 3
    nls_iso8859_1 9600 1
    nls_cp437 11392 1
    vfat 18048 1
    fat 58544 1 vfat
    loop 24580 0
    sr_mod 21156 0
    cdrom 40104 1 sr_mod
    ata_generic 13060 0
    ohci1394 38984 0
    snd_hda_intel 356772 1
    ieee1394 104152 1 ohci1394
    floppy 67272 0
    rtc_cmos 13240 0
    sg 41272 0
    r8169 36744 0
    thermal 23824 0
    intel_agp 33184 0
    rtc_core 26380 1 rtc_cmos
    agpgart 44756 1 intel_agp
    i2c_i801 13340 0
    8250_pnp 16256 0
    pata_marvell 12544 0
    8250 36888 1 8250_pnp
    serial_core 27520 1 8250
    serio_raw 11780 0
    rtc_lib 7680 1 rtc_core
    i2c_core 31360 1 i2c_i801
    button 14240 0
    generic 10372 0 [permanent]
    processor 36144 1 thermal
    ide_core 153872 1 generic
    snd_pcm 98056 2 snd_pcm_oss,snd_hda_intel
    snd_timer 31112 2 snd_seq,snd_pcm
    snd 73080 9 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
    soundcore 13072 1 snd
    snd_page_alloc 15760 2 snd_hda_intel,snd_pcm
    ext3 144272 3
    jbd 76776 1 ext3
    mbcache 13960 1 ext3
    dm_mirror 20736 1
    dm_log 14592 2 dm_mirror
    sd_mod 33536 4
    usbhid 46128 0
    hid 31488 1 usbhid
    ff_memless 10248 1 usbhid
    ahci 32260 4
    libata 154896 3 ata_generic,pata_marvell,ahci
    scsi_mod 164504 4 sr_mod,sg,sd_mod,libata
    ehci_hcd 39052 0
    uhci_hcd 30368 0
    usbcore 145448 4 usbhid,ehci_hcd,uhci_hcd
    dm_snapshot 21832 0
    dm_mod 64864 27 dm_mirror,dm_log,dm_snapshot
    xenblk 23008 0
    xennet 33544 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •