Results 1 to 9 of 9

Thread: Suse Linux 10.3 Port configuration.

  1. #1
    Join Date
    Jun 2008
    Location
    South-West France
    Posts
    1,331

    Default Suse Linux 10.3 Port configuration.

    How to open port (ie 139 ) for specific software when you don't use the Suse firewall and when nmap show that the port is not open ?

    LINUX-SRV:~ # nmap -p 1-65535 127.0.0.1

    Starting Nmap 4.20 ( Insecure.Org - Nmap Free Security Scanner, Tools & Hacking resources ) at 2008-07-18 19:43 CEST
    Interesting ports on localhost (127.0.0.1):
    Not shown: 65528 closed ports
    PORT STATE SERVICE
    22/tcp open ssh
    23/tcp open telnet
    25/tcp open smtp
    80/tcp open http
    111/tcp open rpcbind
    631/tcp open ipp
    901/tcp open samba-swat

    Nmap finished: 1 IP address (1 host up) scanned in 6.014 seconds
    LINUX-SRV:~ #

  2. #2
    Join Date
    Jun 2008
    Location
    Taiwan
    Posts
    150

    Default Re: Suse Linux 10.3 Port configuration.

    Can you try to following procedure to configure sambe server.
    http://lifestory-eng.blogspot.com/20...for-linux.html
    Regards,
    Bryan Yu
    http://lifestory.moqin.com/

  3. #3
    ab@novell.com NNTP User

    Default Re: Suse Linux 10.3 Port configuration.

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Yast: Security and Users: Firewall: Allowed Services: add whatever you
    need: Next: Finish.

    Good luck.





    jcdole wrote:
    | How to open port (ie 139 ) for specific software when you don't use the
    | Suse firewall and when nmap show that the port is not open ?
    |
    | LINUX-SRV:~ # nmap -p 1-65535 127.0.0.1
    |
    | Starting Nmap 4.20 ( 'Insecure.Org - Nmap Free Security Scanner, Tools
    | & Hacking resources' (http://insecure.org) ) at 2008-07-18 19:43 CEST
    | Interesting ports on localhost (127.0.0.1):
    | Not shown: 65528 closed ports
    | PORT STATE SERVICE
    | 22/tcp open ssh
    | 23/tcp open telnet
    | 25/tcp open smtp
    | 80/tcp open http
    | 111/tcp open rpcbind
    | 631/tcp open ipp
    | 901/tcp open samba-swat
    |
    | Nmap finished: 1 IP address (1 host up) scanned in 6.014 seconds
    | LINUX-SRV:~ #
    |
    |
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.2 (GNU/Linux)
    Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

    iD8DBQFIgOCd3s42bA80+9kRAmv2AJ9eRZQyv6rrNaetrGD3eIIza/O3RwCfRt7A
    xsw68J01TXmXkkHFANhzziY=
    =bRHi
    -----END PGP SIGNATURE-----

  4. #4
    Join Date
    Jun 2008
    Location
    South-West France
    Posts
    1,331

    Default Re: Suse Linux 10.3 Port configuration.

    Hi.

    The problem is not configuring samba.

    The problem is why port are closed, and how to open them. I never had this problem before with suse 10.0 on x86 processor.
    This time I use suse 10.3 on X64 processor.

    I don't want to use the firewall.

    I have install an other small linux on a new partition on the same PC ( with no firewall, no SAMBA, nothing but the minimum ).
    I am unable to telnet on any port.

    I think that the problem is to open port when not using the firewall. Isn't it ?

    I need help please .



    LINUX-SRV:~ # echo "hello" | telnet localhost 110
    Trying 127.0.0.1...
    telnet: connect to address 127.0.0.1: Connection refused
    Trying ::1...
    LINUX-SRV:~ #


    LINUX-SRV:~ # echo "hello" | telnet localhost
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    Connection closed by foreign host.
    LINUX-SRV:~ #

    LINUX-SRV:~ # echo "hello" | telnet localhost 139
    Trying 127.0.0.1...
    telnet: connect to address 127.0.0.1: Connection refused
    Trying ::1...
    LINUX-SRV:~ #


    LINUX-SRV:~ # echo "hello" | telnet localhost
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    Connection closed by foreign host.
    LINUX-SRV:~ #
    Reply With Quote

  5. #5
    ab@novell.com NNTP User

    Default Re: Suse Linux 10.3 Port configuration.

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    There are better ways to get lists of open ports:

    netstat -anp | grep 'LISTEN'

    Good luck.





    jcdole wrote:
    | Hi.
    |
    | The problem is not configuring samba.
    |
    | The problem is why port are closed, and how to open them. I never had
    | this problem before with suse 10.0 on x86 processor.
    | This time I use suse 10.3 on X64 processor.
    |
    | I don't want to use the firewall.
    |
    | I have install an other small linux on a new partition on the same PC (
    | with no firewall, no SAMBA, nothing but the minimum ).
    | I am unable to telnet on any port.
    |
    | I think that the problem is to open port when not using the firewall.
    | Isn't it ?
    |
    | I need help please .
    |
    |
    |
    | LINUX-SRV:~ # echo "hello" | telnet localhost 110
    | Trying 127.0.0.1...
    | telnet: connect to address 127.0.0.1: Connection refused
    | Trying ::1...
    | LINUX-SRV:~ #
    |
    |
    | LINUX-SRV:~ # echo "hello" | telnet localhost
    | Trying 127.0.0.1...
    | Connected to localhost.
    | Escape character is '^]'.
    | Connection closed by foreign host.
    | LINUX-SRV:~ #
    |
    | LINUX-SRV:~ # echo "hello" | telnet localhost 139
    | Trying 127.0.0.1...
    | telnet: connect to address 127.0.0.1: Connection refused
    | Trying ::1...
    | LINUX-SRV:~ #
    |
    |
    | LINUX-SRV:~ # echo "hello" | telnet localhost
    | Trying 127.0.0.1...
    | Connected to localhost.
    | Escape character is '^]'.
    | Connection closed by foreign host.
    | LINUX-SRV:~ #
    | Reply With Quote
    |
    |
    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.4.2 (GNU/Linux)
    Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

    iD8DBQFIgQY33s42bA80+9kRAkjpAJ9LZwcAfByBGFnTwQobyJ9c7Gs1+QCeNlcU
    xXeSyuhpUL4lx3kInxSHv4Y=
    =w5rP
    -----END PGP SIGNATURE-----

  6. #6
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,683
    Blog Entries
    4

    Default Re: Suse Linux 10.3 Port configuration.

    Looks like you aren't even running samba since 139 doesn't even show up on a scan of localhost. BTW, it's pointless to scan localhost to see what ports other hosts can see since some services only run on localhost and the scan gives a false impression that they are public. You should scan your own IP address (private or public, just not an address from the 127.x.x.x range).

  7. #7
    Join Date
    Jun 2008
    Location
    South-West France
    Posts
    1,331

    Default Re: Suse Linux 10.3 Port configuration.

    hi.

    I want just to test samba.

    Following samba documentation, it is said to test it by netstat and telnet.
    Netstat does not show port 137, 138, 139, 445.
    And telnet show an error on port 139

    LINUX-SRV:~ # echo "Bonjour" | telnet localhost 139
    Trying 127.0.0.1...
    telnet: connect to address 127.0.0.1: Connection refused
    Trying ::1...
    LINUX-SRV:~ #

    This the reason for posting.
    ( For detail, see on this forum : "Samba - Unable to connect - port 139 is not open" )

  8. #8
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,683
    Blog Entries
    4

    Default Re: Suse Linux 10.3 Port configuration.

    Yes but you don't have samba running, apparently. So nothing is listening on the port. Get the samba service running first.

  9. #9
    Join Date
    Jun 2008
    Location
    South-West France
    Posts
    1,331

    Default Re: Suse Linux 10.3 Port configuration.

    Hi.

    Have removed samba, ldap.

    Have install last version of samba and ldap.

    Have remove all 32 bits softwares ( running an X64 processor )

    Samba is running, and ports are in action :

    LINUX-SRV:~ # netstat -tdlupn |egrep '(137|138|139|445)'
    tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 3278/smbd
    tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 3278/smbd
    udp 0 0 192.168.169.200:137 0.0.0.0:* 2668/nmbd
    udp 0 0 0.0.0.0:137 0.0.0.0:* 2668/nmbd
    udp 0 0 192.168.169.200:138 0.0.0.0:* 2668/nmbd
    udp 0 0 0.0.0.0:138 0.0.0.0:* 2668/nmbd
    LINUX-SRV:~ #

    LINUX-SRV:~ # echo "bonjour" | telnet localhost 139
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    Connection closed by foreign host.
    LINUX-SRV:~ #

    Thank you for your help.

    This thread should be closed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •