Results 1 to 10 of 10

Thread: USB error: Panasonic camera dont connect

  1. #1
    pissin NNTP User

    Thumbs down USB error: Panasonic camera dont connect

    Hi, i upgrade (reinstall) my system to OpenSuse 11 (after to use OpenSuse 10.3), i connect my Panasonic camera in old version much times (Panasonic Lumix).

    In Openusese 11.0 i plug the camera, the system (KDE 3.5) open the box, identify the usb mass storage, but font acces de phots, dont access the SD.

    System messages:
    dmesg
    usb 1-1: USB disconnect, address 2
    hub 5-0:1.0: unable to enumerate USB device on port 1
    usb 1-1: new full speed USB device using uhci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    scsi5 : SCSI emulation for USB Mass Storage devices
    usb 1-1: New USB device found, idVendor=04da, idProduct=2372
    usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-1: Product: DMC-FX10
    usb 1-1: Manufacturer: Panasonic
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning

    messages:
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: new full speed USB device using uhci_hcd and address 3
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: configuration #1 chosen from 1 choice
    Jul 14 09:20:33 pizzabook kernel: scsi5 : SCSI emulation for USB Mass Storage devices
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: New USB device found, idVendor=04da, idProduct=2372
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: Product: DMC-FX10
    Jul 14 09:20:33 pizzabook kernel: usb 1-1: Manufacturer: Panasonic
    Jul 14 09:20:33 pizzabook kernel: usb-storage: device found at 3
    Jul 14 09:20:33 pizzabook kernel: usb-storage: waiting for device to settle before scanning
    Jul 14 09:29:01 pizzabook kernel: usb 1-1: USB disconnect, address 3

    UDEVADM MONITOR:
    UEVENT[1216041633.450964] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/usb_endpoint/usbdev1.3_ep01 (usb_endpoint)
    UEVENT[1216041633.451463] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/usb_endpoint/usbdev1.3_ep82 (usb_endpoint)
    UDEV [1216041633.452172] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1 (usb)
    UDEV [1216041633.459206] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/usb_endpoint/usbdev1.3_ep00 (usb_endpoint)
    UDEV [1216041633.511612] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0 (usb)
    UDEV [1216041633.518509] add /class/scsi_host/host5 (scsi_host)
    UDEV [1216041633.523072] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/usb_endpoint/usbdev1.3_ep01 (usb_endpoint)
    UDEV [1216041633.531186] add /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/usb_endpoint/usbdev1.3_ep82 (usb_endpoint)
    UEVENT[1216041633.622396] remove /class/scsi_host/host5 (scsi_host)
    UDEV [1216041633.623328] remove /class/scsi_host/host5 (scsi_host)

    I try in my notebbok and my home machine, and the same results.

    Anybody help-me?

  2. #2

    Default Re: USB error: Panasonic camera dont connect

    I also have this problem. I have a Panasonic DMC-FZ5 digital camera that works fine in every other linux distribution, but i'm unable to access it under OpenSUSE 11 (KDE 3.5). It is set to "PC mode", the OS should see the SD card in the camera as standard "usb mass storage device", in other distributions it is automatically mounted as /media/disk1.

    When I connect my camera the standard "what to do" KDE window pops up. If I select Open in new window, it tries to open system:/media/camera in konqueror. After a few seconds I get the following error message: Unknown error code:50, Unspecified error. There is no camera folder under /media, neither any other entry for the SD card of the camera. I can't even see any device for it in /dev.

    I tried accessing my camera with digikam to no avail, it gives me "Failed to connect to the camera. Please make sure it is connected properly and turned on" error message.

    Any ideas? How could I tell the system to access my camera as a standard mass storage device (like a flash/pendrive) and not as a digital camera?

  3. #3
    clausing NNTP User

    Default Re: USB error: Panasonic camera dont connect

    Hi,
    I have the same problem with my Panasonic DMC-FX50: It worked with Suse 10.3, after upgrading to 11.0
    it is not reachable. The USB system identifies it correctly.
    Certainly, others have the same problem.

  4. #4

    Default Re: USB error: Panasonic camera dont connect

    hi,

    i have the same problem with Panasonic Lumix DMC-LX2 after suse 10.3 to 11.00 upgrade. did anybody found a solution?

  5. #5
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    27,109
    Blog Entries
    40

    Default Re: USB error: Panasonic camera dont connect

    There is a thread here ... not sure if it is related, but maybe it might help some users:
    https://bugs.launchpad.net/ubuntu/+s...al/+bug/209483

  6. #6
    lolo060908 NNTP User

    Default Re: USB error: Panasonic camera dont connect

    I had the exact same problem on KDE with Archlinux, and have it with opensuse 11. My camera is a Panasonic DMC-FZ5. In both cases, the problem is (partially) solved by removing the kamera package. After that, camera can be accessed as a simple removable medium from Konqueror with the presence of two media icons instead of one (just ignore the second camera icon). Hope this helps.

    So it seems to be a problem with KDE camera protocol.

  7. #7

    Default Re: USB error: Panasonic camera dont connect

    Yesterday I was able to use my FZ-5 camera. I switched USB mode to PTP from PC and I could access the pictures with konqueror (but i could not delete them). The strange thing is: I also tried PTP mode earlier and it didn't work/help, no idea why it worked now.

    I'll also try removing the kamera package suggested in the above post.

  8. #8
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    27,109
    Blog Entries
    40

    Default Re: USB error: Panasonic camera dont connect

    Quote Originally Posted by simico View Post
    I'll also try removing the kamera package suggested in the above post.
    As a curious observer to this thread, what is the "kamera package"? Do you mean digikam?

  9. #9

    Default Re: USB error: Panasonic camera dont connect

    Quote Originally Posted by oldcpu View Post
    As a curious observer to this thread, what is the "kamera package"? Do you mean digikam?
    It is "kdegraphics3-kamera" package. After removing it my Panasonic FZ-5 camera in "PC mode" is recognized again as mass storage device and automatically mounted under /media/diskX

  10. #10

    Default Re: USB error: Panasonic camera dont connect

    Uninstalling the kamera package works like a dream. Thanks a lot for the help.

    I am using Suse 11.0 with the latest patches.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •