Results 1 to 4 of 4

Thread: Lm-Sensors [need help]

  1. #1

    Default Lm-Sensors [need help]

    Ok I'm using KDE3.5 with SuSE 11, I have installed the lm-sensors package properly using Yast. Here's the sensors-detect output:~

    Code:
    sHyLoCk:~ # sensors-detect
    # sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
    
    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.
    
    We can start with probing for (PCI) I2C or SMBus adapters.
    Do you want to probe now? (YES/no): y
    Probing for PCI bus adapters...
    Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
    
    We will now try to load each adapter module in turn.
    Module `i2c-i801' already loaded.
    If you have undetectable or unsupported I2C/SMBus adapters, you can have
    them scanned by manually loading the modules before running this script.
    
    We are now going to do the I2C/SMBus adapter probings. Some chips may
    be double detected; we choose the one with the highest confidence
    value in that case.
    If you found that the adapter hung after probing a certain address,
    you can specify that address to remain unprobed.
    
    Next adapter: SMBus I801 adapter at 2000 (i2c-0)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 Yes
        (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'...                                No
    
    Some chips are also accessible through the ISA I/O ports. We have to
    write to arbitrary I/O ports to probe them. This is usually safe though.
    Yes, you do have ISA I/O ports even if you do not have any ISA slots!
    Do you want to scan the ISA I/O ports? (YES/no): y
    Probing for `National Semiconductor LM78' at 0x290...       No
    Probing for `National Semiconductor LM78-J' at 0x290...     No
    Probing for `National Semiconductor LM79' at 0x290...       No
    Probing for `Winbond W83781D' at 0x290...                   No
    Probing for `Winbond W83782D' at 0x290...                   No
    Probing for `IPMI BMC KCS' at 0xca0...                      No
    Probing for `IPMI BMC SMIC' at 0xca8...                     No
    
    Some Super I/O chips may also contain sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     Yes
    Found `SMSC SCH5127 Super IO'                               Success!
        (address 0x680, driver `dme1737')
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor'...                   No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Fintek'...                       No
    Trying family `ITE'...                                      No
    
    Some south bridges, CPUs or memory controllers may also contain
    embedded sensors. Do you want to scan for them? (YES/no): y
    Silicon Integrated Systems SIS5595...                       No
    VIA VT82C686 Integrated Sensors...                          No
    VIA VT8231 Integrated Sensors...                            No
    AMD K8 thermal sensors...                                   No
    AMD K10 thermal sensors...                                  No
    Intel Core family thermal sensor...                         Success!
        (driver `coretemp')
    Intel AMB FB-DIMM thermal sensor...                         No
    
    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:
    
    Driver `dme1737' (should be inserted):
      Detects correctly:
      * ISA bus, address 0x680
        Chip `SMSC SCH5127 Super IO' (confidence: 9)
    
    Driver `coretemp' (should be inserted):
      Detects correctly:
      * Chip `Intel Core family thermal sensor' (confidence: 9)
    
    Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y
    sHyLoCk:~ # sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    Plz tell me if I am doing it correctly or what needs to be done. I have installed GkRellm also Ksensors, but they can't detect my CPU temp

  2. #2
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: Lm-Sensors [need help]

    Check if the lm_sensors are loaded

    Code:
    /etc/init.d/lm_sensors status
    If not, then

    Code:
    /etc/init.d/lm_sensors start
    then try again the status, or just sensors.

    And then make sure it's loaded at boot time:

    Code:
    chkconfig --set lm_sensors on
    All this can also be controlled from YaST system services.

  3. #3

    Default Re: Lm-Sensors [need help]

    Yup! They are loaded.

    Code:
    sHyLoCk:~ # /etc/init.d/lm_sensors status
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0:      +54.0 C  (high = +86.0 C, crit = +100.0 C)
    
    coretemp-isa-0001
    Adapter: ISA adapter
    Core 1:      +50.0 C  (high = +86.0 C, crit = +100.0 C)
    They are just not showing up in gkrellm and ksensors options.

  4. #4
    Join Date
    Jun 2008
    Location
    UTC+10
    Posts
    9,686
    Blog Entries
    4

    Default Re: Lm-Sensors [need help]

    Ok, I don't know about ksensors, maybe you should edit the title of this thread to attract people who know.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •