Results 1 to 8 of 8

Thread: dvd burning error

  1. #1
    wvmac3 NNTP User

    Default dvd burning error

    When trying to burn dvd's with k3b and brasero (iso and video_ts) the burn ends with an error. I installed opensuse 11.0 on july 1st and was able to burn a couple dvd's but now nothing will burn. I have performed system software updates. I am able to read from dvd's. any help is appreciated.

    BraseroGrowisofs stdout: 4670783488/4670789632 (100.0%) @0.0x, remaining 0:00 RBU 0.1% UBU 100.0%
    BraseroGrowisofs stdout: 4670783488/4670789632 (100.0%) @0.0x, remaining 0:00 RBU 0.1% UBU 100.0%
    BraseroGrowisofs stderr: :-[ WRITE@LBA=22ccd0h failed with SK=0h/ASC=00h/ACQ=02h]: Input/output error
    BraseroGrowisofs stderr: :-( write failed: Input/output error
    BraseroGrowisofs called brasero_job_error
    BraseroGrowisofs finished with an error
    BraseroGrowisofs asked to stop because of an error
    error = 1
    message = "Unhandled error, aborting"
    BraseroGrowisofs stopping
    BraseroGrowisofs got killed
    BraseroGrowisofs stderr: /dev/sr0: flushing cache
    BraseroGrowisofs called brasero_job_set_progress
    BraseroGrowisofs called brasero_job_set_current_action
    Session error : Unhandled error, aborting (brasero_burn_record burn.c:2270)

  2. #2
    Join Date
    Jun 2008

    Default Re: dvd burning error

    Have you tried a different DVD disk, also do you have the latest firmware for your drive?

  3. #3
    wvmac3 NNTP User

    Default Re: dvd burning error

    I don't have other dvd's to try. I can burn cd's with k3b and I was able to burn a dvd with imgburn under wine. Maybe an update will fix the problem eventually.

    I really enjoy opensuse and I don't want to leave it, so as long as imgburn is working I should be ok but I would prefer k3b to work.

    I looked at updating the firmware and I'm not sure how to go about. I don't have a windows partition to easily install the firmware. I don't think that is the problem though.


  4. #4
    Join Date
    Jun 2008
    Blog Entries

    Default Re: dvd burning error

    I have made coasters when I allowed k3b to choose the speed automatically and it burnt the DVD at too high a speed. The blank is supposed to be capable of 16x but apparently the burner isn't up to even 8x despite what the specs say. When I limited the speed in k3b to 4x or 2x, I had no more problems.

    This is also where firmware updates of the burner might help. I didn't bother though, I'll just leave well enough alone.

  5. #5

    Default Re: dvd burning error

    i was just wanting to know if this error has been updated yet. because i just installed opensuse 11 gnome, and i cannot burn any DVD/CD either. brasero shows me the same input/output error.

    my laptop used to burn discs fine with Fedora 9. but this is the only hitch i have after my move from F 9 to Opensuse 11. otherwise, i love it.

    i know this post is old, but please reply to confirm.

    thanks a lot.

  6. #6
    Join Date
    Jun 2008
    Hertfordshire, England

    Default Re: dvd burning error

    Hi all,

    I have been having burn issues over the past month, but for me I have managed to find the answer.

    I have two sets of new blank DVD's. One is Tesco DVD-R and the other is Kodak DVD-R.

    I decided to try and search on Google to find out something about disc quality and found a revealing site at | Blank DVD Media Quality Guide

    give it a read.

    I found that both my set of disc's were in the third catagory and were only fit for landfill. I purchased some "Taiyo Yudew" disc's on line and they all burn 100%.

    It may not be a program, but more the fault of really bad blanks.

    Best regards Keith

  7. #7

    Default Re: dvd burning error

    I am using Sony DVD-R. it was in the first category. so it is really not a problem with the discs. thanks for the link, though. I had read the same link before from ubuntuforums.

    Thanks,but is there no other solution?

  8. #8

    Default Re: dvd burning error

    i hope it gets resolved in 11.1 though. it seems that this is a problem not just with opensuse 11, but a lot of the newer versions of other distros. especially the application brasero.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts