Results 1 to 3 of 3

Thread: madwifi / How to install snapshot madwifi-hal-0.10.5.6...?

  1. #1

    Default madwifi / How to install snapshot madwifi-hal-0.10.5.6...?

    Hello,

    after installing openSUSE 11 on my laptop "SAMSUNG R60 plus", after installing madwifi for openSUSE 11 via YaST2 and after blacklisting ath5k the "dmesg"-command delivers following information concerning the Atheros Chipset:

    # dmesg | egrep 'ath|wifi|hal'
    ath_hal: module license 'Proprietary' taints kernel.
    ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
    ath_pci: 0.9.4
    wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)

    The command "lspci" gives the following information:

    02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

    The commands "iwconfig" and "ifconfig" show no wireless extensions.

    Page HCL/Network Adapters (Wireless - openSUSE) gives the following information concerning chipsets

    Chipset Type Bus Driver
    ---------------+--------------+--------------+------------
    Atheros AR242x 802.11abg PCI/Cardbus madwifi

    SL 11.0 Comments
    -------+---------
    ok You will need to install madwifi hal (>0.10.5.6, check
    with modinfo ath_hal), and then blacklist ath5k. Reboot,
    and it should work.

    On page snapshots.madwifi.org: special snapshots I found the file madwifi-hal-0.10.5.6-r3698-20080604.tar.gz but without the help of YaST2 I do not know how to install software and need assistance. Can you please tell me, how to install the snapshot madwifi-hal-0.10.5.6-r3698-20080604.tar.gz on an "openSUSE 11" distribution?

    Thank you in advance for your help.

    Kind regards.

    Wolfhard

  2. #2
    Join Date
    Jan 2008
    Location
    U.K East Anglia
    Posts
    2,581

    Default Re: madwifi / How to install snapshot madwifi-hal-0.10.5.6..

    you have to uncompress it then compile it to install from a tar.gz file. have a look at my own reminder for installing similar files. It may not be the best,but, for some,especially me it worked. my reminder

    Andy
    To be is to do = Immanuel Kant
    To do is to be = Descartes.
    Do be do be do = Frank Sinatra

    SuSE user since 7.0,Linux user since 1994

  3. #3

    Default Re: madwifi / How to install snapshot madwifi-hal-0.10.5.6..

    Hello Andy,

    after installing the software madwifi-kmp-pae-r3698+AR5007EG_2.6.25.5_1.rm.0.i586.rpm on my computer the atheros chipset is detected. Thank you for your advice to install an rpm-package. Now I can create a wlan-connection and the connection is very stable. The procedure to open the wlan-connection is a little bit "strange". To solve this problem I will open another thread if I do not "google" a wellknown solution before.

    Kind regards.

    Wolfhard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •