Streeched out desktop

English Hardware
1

I have a simple 20 in wide screen monitor. After installing opensuse 11 I cannot get the screen resolution to look good. Everything is screeched out and small. I have tried a few different resolutions but none seem to fix it. I know there is like 5 different places I can change screen resolution but can get any to work right.

Most of the time when I change it I lose the panel and have to reboot. After the reboot I’m back to the default resolution again. Any advice?

2

OK so I figured out how to get the desktop unstretched but now its back to the non wide screen ratio so I have giant black bars on the sides. any help on getting a normal resolution???

3

What is your video card or GPU, and what is the optimal resolution for your LCD? Also, run the following command from a console and post the results here;

cat /etc/X11/xorg.conf

4

Nvidia 8600 gt

/…/

SaX generated X11 config file

Created on: 2008-06-26T19:00:31-0500.

Version: 8.1

Contact: Marcus Schaefer <sax@suse.de>, 2005

Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>

Automatically generated by [ISaX] (8.1)

PLEASE DO NOT EDIT THIS FILE!

Section “Files”
FontPath “/usr/share/fonts/misc:unscaled”
FontPath “/usr/share/fonts/local”
FontPath “/usr/share/fonts/75dpi:unscaled”
FontPath “/usr/share/fonts/100dpi:unscaled”
FontPath “/usr/share/fonts/Type1”
FontPath “/usr/share/fonts/URW”
FontPath “/usr/share/fonts/Speedo”
FontPath “/usr/share/fonts/PEX”
FontPath “/usr/share/fonts/cyrillic”
FontPath “/usr/share/fonts/latin2/misc:unscaled”
FontPath “/usr/share/fonts/latin2/75dpi:unscaled”
FontPath “/usr/share/fonts/latin2/100dpi:unscaled”
FontPath “/usr/share/fonts/latin2/Type1”
FontPath “/usr/share/fonts/latin7/75dpi:unscaled”
FontPath “/usr/share/fonts/baekmuk:unscaled”
FontPath “/usr/share/fonts/japanese:unscaled”
FontPath “/usr/share/fonts/kwintv”
FontPath “/usr/share/fonts/truetype”
FontPath “/usr/share/fonts/uni:unscaled”
FontPath “/usr/share/fonts/CID”
FontPath “/usr/share/fonts/ucs/misc:unscaled”
FontPath “/usr/share/fonts/ucs/75dpi:unscaled”
FontPath “/usr/share/fonts/ucs/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/misc:unscaled”
FontPath “/usr/share/fonts/hellas/75dpi:unscaled”
FontPath “/usr/share/fonts/hellas/100dpi:unscaled”
FontPath “/usr/share/fonts/hellas/Type1”
FontPath “/usr/share/fonts/misc/sgi:unscaled”
FontPath “/usr/share/fonts/xtest”
FontPath “/opt/kde3/share/fonts”
InputDevices “/dev/gpmdata”
InputDevices “/dev/input/mice”
EndSection

Section “ServerFlags”
Option “AllowMouseOpenFail” “on”
Option “ZapWarning” “on”
EndSection

Section “Module”
Load “dbe”
Load “type1”
Load “freetype”
Load “extmod”
Load “glx”
EndSection

Section “InputDevice”
Driver “kbd”
Identifier “Keyboard[0]”
Option “Protocol” “Standard”
Option “XkbLayout” “us”
Option “XkbModel” “microsoftpro”
Option “XkbRules” “xfree86”
EndSection

Section “InputDevice”
Driver “evdev”
Identifier “Mouse[1]”
Option “InputFashion” “Mouse”
Option “Name” “Logitech Media Play Mouse”
Option “Pass” “3”
Option “Vendor” “Sysp”
Option “evBits” “+1-2”
Option “keyBits” “~272-287”
Option “relBits” “~0-2 ~6 ~8”
EndSection

Section “InputDevice”
Driver “mouse”
Identifier “Mouse[3]”
Option “Buttons” “5”
Option “Device” “/dev/input/mice”
Option “Name” “ImPS/2 Generic Wheel Mouse”
Option “Protocol” “explorerps/2”
Option “Vendor” “Sysp”
Option “ZAxisMapping” “4 5”
EndSection

Section “Monitor”
Option “CalcAlgorithm” “XServerPool”
DisplaySize 431 269
HorizSync 30-82
Identifier “Monitor[0]”
ModelName “A4331A 20-INCH DISPLAY”
Option “PreferredMode” “1600x1024”
VendorName “HP”
VertRefresh 50-150
UseModes “Modes[0]”
EndSection

Section “Modes”
Identifier “Modes[0]”
EndSection

Section “Screen”
DefaultDepth 24
SubSection “Display”
Depth 15
Modes “1600x1024” “1600x1000” “1280x1024” “1440x900” “1280x960” “1366x768” “1280x800” “1152x864” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 16
Modes “1600x1024” “1600x1000” “1280x1024” “1440x900” “1280x960” “1366x768” “1280x800” “1152x864” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 24
Modes “1600x1024” “1600x1000” “1280x1024” “1440x900” “1280x960” “1366x768” “1280x800” “1152x864” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
SubSection “Display”
Depth 8
Modes “1600x1024” “1600x1000” “1280x1024” “1440x900” “1280x960” “1366x768” “1280x800” “1152x864” “1280x768” “1280x720” “1024x768” “1280x600” “1024x600” “800x600” “768x576” “640x480”
EndSubSection
Device “Device[0]”
Identifier “Screen[0]”
Monitor “Monitor[0]”
EndSection

Section “Device”
BoardName “GeForce 8600 GT”
BusID “1:0:0”
Driver “nvidia”
Identifier “Device[0]”
Screen 0
VendorName “NVidia”
EndSection

Section “ServerLayout”
Identifier “Layout[all]”
InputDevice “Keyboard[0]” “CoreKeyboard”
InputDevice “Mouse[1]” “CorePointer”
InputDevice “Mouse[3]” “SendCoreEvents”
Option “Clone” “off”
Option “Xinerama” “off”
Screen “Screen[0]”
EndSection

Section “DRI”
Group “video”
Mode 0660
EndSection

Section “Extensions”
Option “Composite” “on”
EndSection

5

Is display size and aspect ratio set correctly in sax2 for your LCD?

6

On 06/27/2008 jaybott wrote:
> Nvidia 8600 gt

I had the same effect with an NVidia card and a 22" screen. It went away after I installed the NVidia drivers and set the monitor to its physical resolution in sax2.

Uwe

7

Yea looks like the nvidia drivers installed by default with the initial install. Is there a newer version than what I am using?