Results 1 to 5 of 5

Thread: kpowersave Suspend 2 Ram doesn't work

  1. #1

    Default kpowersave Suspend 2 Ram doesn't work

    I can't get my laptop to sleep.
    After the suspend failed, my wifi and sound stopped working too.

    kpowersave log:
    Code:
     
    Mon Jun 23 13:24:15 NZST 2008: running suspend hooks.
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/00clear =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/01logging =====
    suspend initiated: Mon Jun 23 13:24:16 NZST 2008
    
    Module                  Size  Used by
    wlan_tkip              10880  3 
    wlan_scan_sta          11392  1 
    ath_rate_sample        10880  1 
    ath_pci               184120  0 
    wlan                  187572  5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
    ath_hal               298336  3 ath_rate_sample,ath_pci
    i915                   24576  2 
    drm                    62228  3 i915
    snd_pcm_oss            38528  0 
    snd_mixer_oss          12928  1 snd_pcm_oss
    snd_seq                44472  0 
    snd_seq_device          6156  1 snd_seq
    microcode               6048  0 
    fuse                   37532  1 
    sha256_generic         12160  0 
    cbc                     3200  1 
    ohci_hcd               18564  0 
    dm_crypt               11012  1 
    loop                   12548  0 
    dm_mod                 45512  3 dm_crypt
    video                  16400  0 
    8139cp                 16640  0 
    output                  2688  1 video
    i2c_i801                7952  0 
    8139too                19584  0 
    mii                     4224  2 8139cp,8139too
    wmi                     5672  0 
    pcspkr                  2304  0 
    sr_mod                 11684  0 
    cdrom                  28700  1 sr_mod
    iTCO_wdt                9632  0 
    i2c_core               16528  1 i2c_i801
    iTCO_vendor_support     2948  1 iTCO_wdt
    usb_storage            33920  0 
    sg                     23472  0 
    sd_mod                 19344  4 
    ehci_hcd               28684  0 
    uhci_hcd               18704  0 
    edd                     7368  0 
    
                 total       used       free     shared    buffers     cached
    Mem:       1025204     656776     368428          0        348     360104
    -/+ buffers/cache:     296324     728880
    Swap:      1590424          0    1590424
    
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/05led =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/20reset-bluetooth =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
    ejecting PCMCIA cards...
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/50modules =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/55battery =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/95led =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/99info =====
    Mon Jun 23 13:24:16 NZST 2008: done running suspend hooks.
    + /usr/sbin/s2ram
    Machine is unknown.
    This machine can be identified by:
        sys_vendor   = "Hewlett-Packard"
        sys_product  = "Compaq Presario C700 Notebook PC"
        sys_version  = "F.32"
        bios_version = "F.32"
    See http://en.opensuse.org/S2ram for details.
    
    If you report a problem, please include the complete output above.
    If you report success, please make sure you tested it from both X and
    the text console and preferably without proprietary drivers.
    + RET=127
    + set +x
    Mon Jun 23 13:24:16 NZST 2008: running resume hooks.
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/99info =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/95led =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/55battery =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/50modules =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
    inserting PCMCIA cards...
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/20reset-bluetooth =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/05led =====
    ===== Mon Jun 23 13:24:16 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/01logging =====
    ===== Mon Jun 23 13:24:17 NZST 2008: running hook: /usr/lib/pm-utils/sleep.d/00clear =====
    Mon Jun 23 13:24:17 NZST 2008: done running resume hooks.

  2. #2

    Default Re: kpowersave Suspend 2 Ram doesn't work

    Hello !
    Have you read this page ?
    S2ram - openSUSE
    Your machine seems not to be in the s2ram whitelist (your log says:
    Code:
    Machine is unknown.
    This machine can be identified by:
        sys_vendor   = "Hewlett-Packard"
        sys_product  = "Compaq Presario C700 Notebook PC"
        sys_version  = "F.32"
        bios_version = "F.32"
    See http://en.opensuse.org/S2ram for details.
    Look at this part of the s2ral wiki
    S2ram - openSUSE

    Try, in a console, to suspend using the command
    Code:
    su -
    then

    Code:
    s2ram -f
    If it doesn't work, try several parameters from the page I mention above.

    Once it works, don't hesite to come back here so we can contact the dev to add you computer to the whitelist

    ps: could you also be more specific on what doesn't work ?
    I guess, right now, you computer only lock the screen ?

  3. #3
    Badger_UK NNTP User

    Default Re: kpowersave Suspend 2 Ram doesn't work

    Thanks for the info!
    s2ram -f works fine on my machine:

    sys_vendor = "Hewlett-Packard"
    sys_product = "HP Compaq dc7800p Ultra-slim Desktop"
    sys_version = " "
    bios_version = "786F1 v01.04"

    Running Opensuse 11 KDE 3.5.9

  4. #4

    Default Re: kpowersave Suspend 2 Ram doesn't work

    Quote Originally Posted by Badger_UK View Post
    Thanks for the info!
    s2ram -f works fine on my machine:

    sys_vendor = "Hewlett-Packard"
    sys_product = "HP Compaq dc7800p Ultra-slim Desktop"
    sys_version = " "
    bios_version = "786F1 v01.04"

    Running Opensuse 11 KDE 3.5.9

    hi
    s2ram -f worked!
    But I could not get my screen to come back. I had to do a forced shutdown and restart it to get my screen.

  5. #5
    Badger_UK NNTP User

    Default Re: kpowersave Suspend 2 Ram doesn't work

    Quote Originally Posted by vinboy View Post
    hi
    s2ram -f worked!
    But I could not get my screen to come back. I had to do a forced shutdown and restart it to get my screen.
    Sorry to here that. Guess you will have to do as the S2Ram site suggests and trawl through the switch options to find a working combination:

    * s2ram -f -a 3
    * s2ram -f -a 2
    * s2ram -f -a 1
    * s2ram -f -p -m
    * s2ram -f -p -s
    * s2ram -f -m
    * s2ram -f -s
    * s2ram -f -p
    * s2ram -f -a 1 -m
    * s2ram -f -a 1 -s
    If none of those combinations work, start again but add the "-v" switch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •