Starting KDE 4 effects gives me a black screen!

[leandroribeiro]

I there!

I used 10.3 for a long time and loved it. Now I'm trying to get openSuse 11.0 running. Everything went smooth, except for one thing: KDE4 effects.

The first time I turned on KDE4 effects, without fglrx ATI drivers, they worked, but very clumbsy. FPS was very, VERY, low! So I turned off KDE 4 effects and installed the ATI drivers from ATI openSuse repo. When I then turned effects on, my screen whent black and I could only see the mouse pointer.

I tried Kubuntu before openSuse 11 came out and effects worked fine, although I was using KDE 4.1.

Any ideas as why this is happening?

Thanks in advance,
Leandro

:: and now the technical stuff:

Graphic card: ATI Mobility Radeon 9600/9700
ATI Driver: 8.49.7
Inside xorg.conf:

Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "glx"
Load "type1"
Load "extmod"
Load "dbe"
Load "freetype"
Load "dri"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "ZapWarning" "on"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "pt"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech M-UV69a Optical Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Mouse[3]"
Driver "synaptics"
Option "Buttons" "7"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "HorizScrollDelta" "0"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Modes"
Identifier "Modes[0]"
EndSection

Section "Monitor"
Identifier "Monitor[0]"
VendorName "--> LCD"
ModelName "1280X800@60HZ"
UseModes "Modes[0]"
DisplaySize 313 235
HorizSync 29.0 - 52.0
VertRefresh 50.0 - 60.0
Option "DPMS"
Option "PreferredMode" "1280x800"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "Device[0]"
Driver "radeon"
VendorName "ATI"
BoardName "RV350 NP"
Option "GARTSize" "32"
EndSection

Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection

Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x800" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x800" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

[snakeeyes]

where is the composite extension, u don't have that enabled?

[leandroribeiro]

I have no idea

The box in sax2 is checked. I recall having to do something about that when I first tried linux (couple of years ago), but ever since Ubuntu 7.10 that I don't mess around much with config files.

How do I do this and why isn't activated by default?

[snakeeyes]

I have no idea why it isn't on by default though it should be...

type in konsole:

kdesu kwrite /etc/X11/xorg.conf

paste this at the end:

Section "Extensions"
Option "Composite" "Enable"
EndSection

If the composite extension alone doesn't work then trying putting these in the screen section right below "DefaultDepth 24"

Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"

Please note that whenever u modify xorg.conf, u need to log out and press "ctrl"+"alt"+backspace to restart xserver for changes to take effect.

Tell me how it goes then.

[leandroribeiro]

Thanks!

I was already trying to paste something similar (Option "Composite" "1") that I read in another place, but I didn't knew how to edit xorg.conf with admin password (sudo kwrite wasn't working )

Anyway, now all is smooth and working

Thanks a bunch!

[snakeeyes]

no problem