Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Update on my Kmuddy problem

  1. #1
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Update on my Kmuddy problem

    So a couple of weeks back, I asked for help installing kmuddy. You can read that in the archives here

    So I have to rebuild the rpm with a slight change to the .spec file, and then execute: rpmbuild -ba kmuddy.spec, but I get an error. After a giant list of files it starts going through what I think is a dependencies check? Not sure, still trying to get used to the whole Linux thing.

    Not enough room to post entire output. I'm posting that as a reply to this thread.


    What else do I have to do?

  2. #2
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Output

    This is everything after the file creation list is finished.

    + STATUS=0
    + '[' 0 -ne 0 ']'
    + cd kmuddy-0.8
    ++ /usr/bin/id -u
    + '[' 0 = 0 ']'
    + /bin/chown -Rhf root .
    ++ /usr/bin/id -u
    + '[' 0 = 0 ']'
    + /bin/chgrp -Rhf root .
    + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
    + KDEDIR=/opt/kde3
    + LOCALFLAGS='--enable-final --with-sdl'
    + ./configure --prefix /opt/kde3 --enable-final --with-sdl
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking target system type... i686-pc-linux-gnu
    checking for a BSD-compatible install... /usr/bin/install -c
    checking for -p flag to install... yes
    checking whether build environment is sane... yes
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking for kde-config... /opt/kde3/bin/kde-config
    checking where to install... /opt/kde3 (as requested)
    checking for style of include used by make... GNU
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables...
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ANSI C... none needed
    checking dependency style of gcc... gcc3
    checking how to run the C preprocessor... gcc -E
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking whether gcc is blacklisted... no
    checking whether g++ supports -Wmissing-format-attribute... yes
    checking whether gcc supports -Wmissing-format-attribute... yes
    checking whether g++ supports -Wundef... yes
    checking whether g++ supports -Wno-long-long... yes
    checking whether g++ supports -Wno-non-virtual-dtor... yes
    checking whether g++ supports -fno-exceptions... yes
    checking whether g++ supports -fno-check-new... yes
    checking whether g++ supports -fno-common... yes
    checking whether g++ supports -fexceptions... yes
    checking how to run the C++ preprocessor... g++ -E
    checking whether g++ supports -O0... yes
    checking whether g++ supports -Wl,--no-undefined... yes
    checking whether g++ supports -Wl,--allow-shlib-undefined... yes
    not using lib directory suffix
    checking for a sed that does not truncate output... /usr/bin/sed
    checking for egrep... grep -E
    checking for ld used by gcc... /usr/i586-suse-linux/bin/ld
    checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
    checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
    checking for BSD-compatible nm... /usr/bin/nm -B
    checking whether ln -s works... yes
    checking how to recognise dependent libraries... pass_all
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking dlfcn.h usability... yes
    checking dlfcn.h presence... yes
    checking for dlfcn.h... yes
    checking for g77... no
    checking for f77... no
    checking for xlf... no
    checking for frt... no
    checking for pgf77... no
    checking for fort77... no
    checking for fl32... no
    checking for af77... no
    checking for f90... no
    checking for xlf90... no
    checking for pgf90... no
    checking for epcf90... no
    checking for f95... no
    checking for fort... no
    checking for xlf95... no
    checking for ifc... no
    checking for efc... no
    checking for pgf95... no
    checking for lf95... no
    checking for gfortran... gfortran
    checking whether we are using the GNU Fortran 77 compiler... yes
    checking whether gfortran accepts -g... yes
    checking the maximum length of command line arguments... 32768
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for objdir... .libs
    checking for ar... ar
    checking for ranlib... ranlib
    checking for strip... strip
    checking if gcc static flag works... yes
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC
    checking if gcc PIC flag -fPIC works... yes
    checking if gcc supports -c -o file.o... yes
    checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking for shl_load... no
    checking for shl_load in -ldld... no
    checking for dlopen... no
    checking for dlopen in -ldl... yes
    checking whether a program can dlopen itself... yes
    checking whether a statically linked program can dlopen itself... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... no
    configure: creating libtool
    appending configuration tag "CXX" to libtool
    checking for ld used by g++... /usr/i586-suse-linux/bin/ld
    checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
    checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
    checking for g++ option to produce PIC... -fPIC
    checking if g++ PIC flag -fPIC works... yes
    checking if g++ supports -c -o file.o... yes
    checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking for shl_load... (cached) no
    checking for shl_load in -ldld... (cached) no
    checking for dlopen... (cached) no
    checking for dlopen in -ldl... (cached) yes
    checking whether a program can dlopen itself... (cached) yes
    checking whether a statically linked program can dlopen itself... (cached) yes
    appending configuration tag "F77" to libtool
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... no
    checking for gfortran option to produce PIC... -fPIC
    checking if gfortran PIC flag -fPIC works... yes
    checking if gfortran supports -c -o file.o... yes
    checking whether the gfortran linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking for msgfmt... /usr/bin/msgfmt
    checking for gmsgfmt... /usr/bin/msgfmt
    checking for xgettext... :
    checking if C++ programs can be compiled... yes
    checking for strlcat... no
    checking if strlcat needs custom prototype... yes - in libkdefakes
    checking for strlcpy... no
    checking if strlcpy needs custom prototype... yes - in libkdefakes
    checking for main in -lutil... yes
    checking for main in -lcompat... no
    checking for crypt in -lcrypt... yes
    checking for socklen_t... yes
    checking for dnet_ntoa in -ldnet... no
    checking for dnet_ntoa in -ldnet_stub... no
    checking for inet_ntoa... yes
    checking for connect... yes
    checking for remove... yes
    checking for shmat... yes
    checking for sys/types.h... (cached) yes
    checking for stdint.h... (cached) yes
    checking sys/bitypes.h usability... yes
    checking sys/bitypes.h presence... yes
    checking for sys/bitypes.h... yes
    checking for poll in -lpoll... no
    checking Carbon/Carbon.h usability... no
    checking Carbon/Carbon.h presence... no
    checking for Carbon/Carbon.h... no
    checking CoreAudio/CoreAudio.h usability... no
    checking CoreAudio/CoreAudio.h presence... no
    checking for CoreAudio/CoreAudio.h... no
    checking if res_init needs -lresolv... yes
    checking for res_init... yes
    checking if res_init needs custom prototype... no
    checking for killpg in -lucb... no
    checking for int... yes
    checking size of int... 4
    checking for short... yes
    checking size of short... 2
    checking for long... yes
    checking size of long... 4
    checking for char *... yes
    checking size of char *... 4
    checking for dlopen in -ldl... (cached) yes
    checking for shl_unload in -ldld... no
    checking for size_t... yes
    checking size of size_t... 4
    checking for unsigned long... yes
    checking size of unsigned long... 4
    checking sizeof size_t == sizeof unsigned long... yes
    checking for PIE support... yes
    checking if enabling -pie/fpie support... yes
    checking crt_externs.h usability... no
    checking crt_externs.h presence... no
    checking for crt_externs.h... no
    checking for _NSGetEnviron... no
    checking for vsnprintf... yes
    checking for snprintf... yes
    checking for X... libraries /usr/lib, headers .
    checking for IceConnectionNumber in -lICE... yes
    checking for libXext... yes
    checking for pthread_create in -lpthread... yes
    checking for extra includes... no
    checking for extra libs... no
    checking for libz... -lz
    checking for libpng... -lpng -lz -lm
    checking for libjpeg6b... no
    checking for libjpeg... no
    configure: WARNING: libjpeg not found. disable JPEG support.
    checking for perl... /usr/bin/perl
    checking for Qt... configure: error: Qt (>= Qt 3.1 (20021021) and < 4.0) (headers and libraries) not found. Please check your installation!
    For more details about this problem, look at the end of config.log.
    error: Bad exit status from /var/tmp/rpm-tmp.91153 (%prep)


    RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.91153 (%prep)

  3. #3

    Default Re: Output

    do you have the qt devel libraries installed?

  4. #4
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Re: Output

    I reinstalled them and tried again. Same error.

  5. #5
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Re: Output

    Okay, I installed qt3-devel and ran the rpmrebuild -ba command again. It got a little further before it ran into another problem.

    checking for Qt... libraries /usr/lib/qt3/lib, headers /usr/lib/qt3/include using -mt
    checking for moc... /usr/lib/qt3/bin/moc
    checking for uic... /usr/lib/qt3/bin/uic
    checking whether uic supports -L ... yes
    checking whether uic supports -nounload ... yes
    checking if Qt needs -ljpeg... no
    checking for rpath... yes
    checking for KDE... configure: error:
    in the prefix, you've chosen, are no KDE headers installed. This will fail.
    So, check this please and use another prefix!
    error: Bad exit status from /var/tmp/rpm-tmp.7817 (&#37;prep)


    RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.7817 (%prep)

    What does it mean by prefix? I don't remember having chosen anything, prefix or otherwise, so I am guessing this is something I'm going to have to go into a file to change? What file? What change(s) do I need to make?

  6. #6

    Default Re: Output

    In the header of your earlier post, there was:

    + STATUS=0
    + '[' 0 -ne 0 ']'
    + cd kmuddy-0.8
    ++ /usr/bin/id -u
    + '[' 0 = 0 ']'
    + /bin/chown -Rhf root .
    ++ /usr/bin/id -u
    + '[' 0 = 0 ']'
    + /bin/chgrp -Rhf root .
    + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
    + KDEDIR=/opt/kde3
    + LOCALFLAGS='--enable-final --with-sdl'
    + ./configure --prefix /opt/kde3 --enable-final --with-sdl

    Note the --prefix given to configure! That's the option it's complaining about. Check the KDEDIR is correct, and make sure you have the kdebase-devel (I think that's the one) installed.

  7. #7
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Re: Update on my Kmuddy problem

    I installed kdebase-devel and got a lot further along. Still hit an error though. It's looking for:

    /tmp/kmuddy-0.8/opt/kde3/man/man1/kmuddy.1.gz

    instead that dir has:

    kmuddy.1

    How do I take care of this? Do I just rename the file? Do I have change the line in the kmuddy.spec file like the license/copyright issue I had earlier?

  8. #8

    Default Re: Update on my Kmuddy problem

    I guess I'd try to gzip it. Only rename it if it's already compressed.

  9. #9
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Re: Update on my Kmuddy problem

    Can you gzip a file that doesn't end in .gz? More importantly, this is a file that is being created by the rpmbuild -ba command. If I run that again, wont it just recreate the wrong file and throw up the error again?

  10. #10
    Join Date
    Jun 2008
    Location
    See above ^)^
    Posts
    29

    Default Re: Update on my Kmuddy problem

    Renaming the file didn't work. When I ran the rpmbuild -ba command again it replaced the file (to be fair, I thought that would happen), so I went in and edited the .spec file to look for what was actually being created. Then everything was fine. Well, at least, I got an rpm & it installed. Now I just have to learn how to use it! Thanks for the help!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •