Results 1 to 2 of 2

Thread: ZTE MF620

  1. #1
    ronartos NNTP User

    Default ZTE MF620

    How can I setup my current 3G provider's settings

    Username: myusername@isp
    password: mypassword
    APN: mynetwork

    Phone *99#

    Authentication: PAP

    on my device in /dev/ttyUSB0, from what I've learned in the internet I got this wvdial settings. (Note that I'm using usb_modeswitch and comgt -d /dev/ttyUSB0 to prepare my ZTE MF620 3G data card to connect to my ISP

    [Dialer tmn]
    Modem = /dev/ttyUSB0
    Init2 = ATZ
    Init3 = AT+CGDCONT=1,"IP","mynetwork","",0,0
    Stupid Mode = 1
    Phone = *99#
    Ask Password = 0
    ISDN = 0
    Username = myusername
    Dial Command = ATD
    Password = mypassword
    Baud = 460800
    Auto DNS = 1

  2. #2
    Join Date
    Mar 2008
    Blog Entries

    Default Re: ZTE MF620

    I believe there's a tool in Yast --> Network devices --> modem. I set up a couple of 3G devices using Yast after I had installed ppp, udev, smpppd, wvdial and Kinternet (I'm not sure how many of these are needed, it's just that with them it works for me). I wroyte them up and maybe there's something in them that might be a clue for your situation. Check here for clues:
    Wireless Broadband EVDO CDMA MM 5500SU usb modem in Suse 10.0, 10.1 - Bigpond
    Wireless broadband in Suse/openSUSE for Bigpond Next G Network (HSDPA-enabled bp3-usb)
    Wireless HSDPA broadband in Suse/openSUSE Using Nokia 6120 Mobile Phone as Modem on Three Mobile Australia

    Leap 42.3 & 15.1 &KDE
    FYIs from the days of yore

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts