View RSS Feed

Recent Blogs Posts

  1. The command line is by far the easiest way to update Tumbleweed

    Updates of Tumbleweed are distribution upgrades

    Check for pending updates and download packages:
    Code:
    erlangen:~ # zypper --non-interactive dist-upgrade --download-only --dry-run  
    Loading repository data... 
    Reading installed packages... 
    Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositori
    es are compatible before you continue. See 'man zypper' for more information about this command. 
    Computing
    ...
    Categories
    KeepItSimple
  2. Install Leap / Tumbleweed from USB Stick On Internal Disk

    Download image:

    https://get.opensuse.org/leap/15.4, https://get.opensuse.org/tumbleweed

    Create the USB stick:

    Double check the devices:
    Code:
    erlangen:~ # lsscsi -sN 
    [2:0:0:0]    disk    ATA      CT2000BX500SSD1  030   /dev/sdc   2.00TB 
    [4:0:0:0]    cd/dvd  PIONEER  DVD-RW  DVR-221  1.00  /dev/sr0   1.07GB 
    [6:0:0:0]    disk    Intenso  Ultra Line       1100  /dev/sda   32.0GB 
    erlangen:~ # findmnt --types iso9660  
    ...
    Categories
    KeepItSimple
  3. Tumbleweed Partitioning

    Drive /dev/nvme0n1 has been partitioned with the Expert Partitioner into an EFI System partition and two Linux System partitions:

    Code:
    erlangen:~ # fdisk -x -o Device,Size,Type /dev/nvme0n1 
    Disk /dev/nvme0n1: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
    Disk model: Samsung SSD 970 EVO Plus 2TB             
    Units: sectors of 1 * 512 = 512 bytes 
    Sector size (logical/physical): 512 bytes / 512 bytes 
    I/O size (minimum/optimal): 512 bytes / 512 bytes 
    ...
    Categories
    KeepItSimple
  4. Leap / Plasma Locales Configuration

    Locales come with three flavors. Each has its own configuration file:

    1. System Locale:

    System locale is set during installation:
    Code:
    Leap-15-4:~ # cat /etc/locale.conf  
    LANG=de_DE.UTF-8 
    Leap-15-4:~ #
    Code:
    Leap-15-4:~ # localectl 
       System Locale: LANG=de_DE.UTF-8 
           VC Keymap: de-latin1-nodeadkeys 
          X11 Layout: de 
           X11 Model: pc105 
         X11 Variant: nodeadkeys 
         X11 Options: terminate:ctrl_alt_bksp
    ...
    Categories
    KeepItSimple
  5. xfce via xrdp na Leap 15

    Instalacja xrdp i udostępnianie sesji graficznej to nic szczególnie wielkiego. Ponieważ sam czasem korzystam z tego rozwiązania w połączeniu z xfce, to listuję kroki, żeby mieć je pod ręką.

    Przy okazji bardzo chwalę sobie posługiwanie się wzorcami (tzw. patterns) w zypperze.

    Po kolei.

    Installacja wzorca xfce - sprawdzi się również przy JeOSie:
    Code:
    zypper in -t pattern xfce
    Dodanie portu rdp do zapory:
    Code:
    firewall-cmd --add-port=3389/tcp --permanent
    ...

    Updated 17-Sep-2022 at 14:44 by pbojczuk

    Tags: xfce, xrdp, zypper
    Categories
    Uncategorized
Page 1 of 19 12311 ... LastLast