PDA

View Full Version : LEAP 15.3 hddtemp en plasmoid Thermal Monitor



daltcorda
09-Jul-2022, 09:38
Hola
Estoy intentando configurar los sensores de temperatura y no consigo que el Plasmoid Thermal Monitor muestre la temperatura de los discos duros.
He instalado hddtemp y sensors, luego he ejecutado "sensors-detect" pero el plasmoid no muestra los HDD.
Creo haber encontrado la solución en este hilo pero no sé como arreglarlo.
https://forums.opensuse.org/showthread.php/556484-Lost-udisks-thermal-monitor-sources-after-upgrade/page2


salut

krovikan
09-Jul-2022, 10:16
He leido ese enlace y me recuerda a lo que pasa desde hace muchísimo con ese plasmoide. Cuando inicias sesión no da la temperatura de la CPU, pero si haces click derecho --> Reload Temperature Sources te la pone.

El sensor añadido en mi caso es: lmsensors/coretemp-isa-0000/Package_id_0

Yo tampoco entiendo esa solución (que no sé si se aplica a mi, a ti o a los dos). Aparte de que he visto el medidor subir a 100ºC cuando eso es imposible ya que con 80ºC reales el ordenador se para (no se apaga pero se congela la pantalla y hay que hacer REISUB).

No sé si medirá mal la temperatura porque al menos da esa sensación.

hddtemp no lo tengo instalado. Creo que lei en alguna ocasión que con sensors es suficiente:


S | Name | Type | Version | Arch | Repository
---+-------------+---------+-------------+--------------+----------------------------
i+ | libsensors4 | paquete | 3.5.0-4.6.1 | x86_64 | Repositorio principal (OSS)
name: libsensors4
i+ | sensors | paquete | 3.5.0-4.6.1 | x86_64 | Repositorio principal (OSS)
name: sensors


Saludos

daltcorda
09-Jul-2022, 11:40
Hola
Yo he seguido estos dos tutoriales, uno para configurar los sensores y el otro para configurar el plasmoide.
https://www.diversidadyunpocodetodo.com/opensuse-sensores-temperatura-disco-procesador-tarjeta-grafica/
https://www.diversidadyunpocodetodo.com/thermal-monitor-plasmoide-kde-plasma-5/

En el enlace del foro en inglés hablan de crear un enlace simbólico, pero no sé donde.>:(

Lo de "Reload Temperature Sources" a mi también me pasa pero no siempre.


salut

mikrios
09-Jul-2022, 14:12
Hola:

Según vi hace tiempo hdtemp, corre en 2º plano y que sepa no es necesario instalarlo , prefiero una aplicación que la ejecute eventualmente y se desconecte una vez terminado .

Sobre sensors-detect, ahi , creo que es necesario para inxi, ademas para el comando sensors .

De los plasmaoid , había tres y uno de ellos daba fallos, en el mismo plasmoid, se avisaba sobre ello, por lo que solo que había que instalar 2 de ellos, después de la lista se elegía los que podías usar para que te indicara la medida, ya que la lista es grande :



mikrios:~ # sensors
nouveau-pci-c100
Adapter: PCI adapter
fan1: 0 RPM
temp1: +47.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

nvme-pci-a300
Adapter: PCI adapter
Composite: +38.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +100.0°C, crit = +110.0°C)
Core 0: +35.0°C (high = +100.0°C, crit = +110.0°C)
Core 1: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 2: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 4: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 5: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 8: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 9: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 10: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 11: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 12: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 13: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 14: +33.0°C (high = +100.0°C, crit = +110.0°C)

nvme-pci-4700
Adapter: PCI adapter
Composite: +45.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +41.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a100
Adapter: PCI adapter
Composite: +37.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-e200
Adapter: PCI adapter
Composite: +46.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

eth0-pci-0400
Adapter: PCI adapter
PHY Temperature: +46.2°C
MAC Temperature: +55.4°C

nvme-pci-e100
Adapter: PCI adapter
Composite: +61.9°C (low = -273.1°C, high = +69.8°C)
(crit = +69.8°C)
Sensor 1: +61.9°C (low = -273.1°C, high = +69.8°C)

nvme-pci-a400
Adapter: PCI adapter
Composite: +35.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a200
Adapter: PCI adapter
Composite: +37.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)



El que comenta @ krovican va bien, aún que puedes elegir mas .

El que probé y conozco es el 2º de tu enlace, en un principio se saco con un error, indicando que fallaba, pero lo solucionaron y a partir de ahí no hubo problemas, en cuanto los que hay, me preció, ver 5 o mas, uno de ellos iba bien : se parece en el nombre podia ser thermal monitor fix , no recuerdo pero estaba como un simple monitor.

De todas formas lo pones a buscar, en zona de búsqueda , pones temp y descargas el que quieras .

Como que un enlace , si va en la barra de tareas y es un plasmoid?

De todas formas, creo que hay un incidencia para bajarse personificaciones, temas, plasmoids, etc , suele salir algo como esto (y solo pasa con la 15.4) :

https://img.susepaste.org/images/47483917.jpg

Saludos cordiales

daltcorda
10-Jul-2022, 01:47
Hola
Ya me funciona, he instalado la versión del plasmoide "Thermal Monitor FIX" y he copiado el fichero /usr/bin/qdbus-qt5 a /usr/bin/qdbus y al reiniciar ya reconoce los sensores de los HDD el plasmoide.

Con esta versión no hace falta clickar "Reload Temperature Sources", supongo que de ahí la coletilla "FIX".



salut

krovikan
10-Jul-2022, 03:25
Perfecto, @Daltcorda.

He bajado el Thermal Monitor Fix tras leer algunos comentarios:

https://i.imgur.com/nLjkBNh.png
He aprovechado para actualizar el sistema (aún sigo en 15.3) y reiniciar (en mi caso no he copiado ningún fichero).

Va casi perfecto. Tarda unos pocos segundos pero ya sale la temperatura por sí sola (la temperatura de la gráfica es instantánea). Se acabó el incordio del Reload Sources.


Saludos

daltcorda
11-Jul-2022, 09:31
He aprovechado para actualizar el sistema (aún sigo en 15.3) y reiniciar (en mi caso no he copiado ningún fichero).

Va casi perfecto. Tarda unos pocos segundos pero ya sale la temperatura por sí sola (la temperatura de la gráfica es instantánea). Se acabó el incordio del Reload Sources.


Saludos

Pero sin HDDTEMP te indica la temperatura de los HDD?

Yo también sigo con 15.3 hasta que me salga el baner en Yast de que ya no hay soporte XD, entonces actualizaré a 15.4 que ya estará mas pulida.
Hace tiempo que no padezco de versionitis, para eso esta VirtualBox.


salut

krovikan
11-Jul-2022, 10:30
No, no tengo la temperatura de los discos. Lo único que me detecta sensors es:


~/Descargassensors ✔  6m 23s  19:22:48
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +32.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)

Y la propia gráfica añade algo para la temperatura que puedo escogerlo en el Thermal, nvidia-smi.


Saludos

mikrios
11-Jul-2022, 13:15
No, no tengo la temperatura de los discos. Lo único que me detecta sensors es:


~/Descargassensors ✔  6m 23s  19:22:48
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +32.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)

Y la propia gráfica añade algo para la temperatura que puedo escogerlo en el Thermal, nvidia-smi.


Saludos

Ejecutaste sensor-detect , al hacerlo se configura el archivo, pero aún así , creo que a veces hay que habilitarlo ; antes era en gestor de archivo, ahora no se si lo hace junto con smartd, de todas formas en gestor de servicios queda lo de lm-sensores.

Muchas veces depende de que en el kernel lo incluya, una de mis placas tardo casi 2 años en mostrar los sensores (las placas suelen comunicarse por buses I2C o I3C, donde pasan datos , como temp, rpm, etc , si sensors-detect no da con la dirección correcta de escaneo no mostrara, la información correspondiente .

Aunque creo que hdtemp, se ejecuta en 2º plano, y come recursos a la cpu, necesites o no esa información (mi preferencia es mostrar ese dato cuando lo necesite y des-activarlo cuando no lo necesite, pero creo que por defecto viene ya activado) .

mikrios:~ # sensors
nouveau-pci-c100
Adapter: PCI adapter
fan1: 0 RPM
temp1: +47.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

nvme-pci-a100
Adapter: PCI adapter
Composite: +28.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +100.0°C, crit = +110.0°C)
Core 0: +35.0°C (high = +100.0°C, crit = +110.0°C)
Core 1: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 2: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 4: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 5: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 8: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 9: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 10: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 11: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 12: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 13: +35.0°C (high = +100.0°C, crit = +110.0°C)
Core 14: +33.0°C (high = +100.0°C, crit = +110.0°C)

nvme-pci-a300
Adapter: PCI adapter
Composite: +38.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)

nvme-pci-a400
Adapter: PCI adapter
Composite: +27.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +29.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-4700
Adapter: PCI adapter
Composite: +46.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

eth0-pci-0400
Adapter: PCI adapter
PHY Temperature: +46.2°C
MAC Temperature: +55.4°C

nvme-pci-e100
Adapter: PCI adapter
Composite: +61.9°C (low = -273.1°C, high = +69.8°C)
(crit = +69.8°C)
Sensor 1: +61.9°C (low = -273.1°C, high = +69.8°C)

nvme-pci-e200
Adapter: PCI adapter
Composite: +46.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a200
Adapter: PCI adapter
Composite: +28.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)




y lm-sensors en yast gestor de servicios, viene (manual) inactivo (muerto) , creo que tienes que mirar mas en sensors-detect y lo que salga es lo que hay .

Saludos cordiales

krovikan
11-Jul-2022, 16:44
Antes de postear mi salida de sensors ya hice de nuevo el sensors-detect. YES a todo y es lo que hay.

Y el servicio hace años que está Activo y durante el arranque.


Saludos

mikrios
12-Jul-2022, 00:31
Hola:

Pues a esperar que lo incluya el kernel, ademas de eso tiene que dar las rpm de los ventiladores de la placa base.
(en el x299 me parece que no me los da, ademas tiene una placa de extensión para 4 ventiladores mas, lo que no recuerdo y lo mirare en otro momento, es que en ese pc, tengo TW, 15.3 y 15.4, que es el log que puse, mirare los 2 primeros TW y la 15.2) .

Hay otra cosa que da la temperatura del los hd y creo que era el programa de particiones, en ver el smart de los discos, pero siempre que el disco sea compatible (mirar si bios tiene para habilitarlo) .

Los datos deberían ser esos mas las rpm de los ventiladores (incluso el de la bomba de rl , me parece que lo interpreta como un ventilador) .

Por la tarde lo pondré en marcha y otro que tengo para hacerle mantenimiento y pasar info al servidor (el que tardo 2 años en darme esos datos )

El programa de particiones debe ser partition manager (particionador de kde) y smartctl -a /dev/sda da temperatura :




HP-OMEN:~ # smartctl -a /dev/sda
smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.3.18-150300.59.76-default] (SUSE RPM)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Pro Compute
Device Model: ST1000LM049-2GH172
Serial Number: WGS28X69
LU WWN Device Id: 5 000c50 0bdbcdd71
Firmware Version: RXM3
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
TRIM Command: Available
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 12 08:11:10 2022 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 070 064 006 Pre-fail Always - 8935929
3 Spin_Up_Time 0x0027 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 3040
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 089 060 045 Pre-fail Always - 849078843
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15372 (207 208 0)
10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1694
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 053 045 040 Old_age Always - 47 (Min/Max 30/50)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 4
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 267
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 222661
194 Temperature_Celsius 0x0022 047 055 000 Old_age Always - 47

(0 18 0 0 0)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 15367 -
# 2 Short offline Completed without error 00% 15343 -
# 3 Short offline Completed without error 00% 15319 -
# 4 Short offline Completed without error 00% 15295 -
# 5 Short offline Completed without error 00% 15271 -
# 6 Short offline Completed without error 00% 15247 -
# 7 Short offline Completed without error 00% 15223 -
# 8 Short offline Completed without error 00% 15199 -
# 9 Short offline Completed without error 00% 15175 -
#10 Extended offline Completed without error 00% 15153 -
#11 Short offline Completed without error 00% 15128 -
#12 Short offline Completed without error 00% 15104 -
#13 Short offline Completed without error 00% 15080 -
#14 Short offline Completed without error 00% 15056 -
#15 Short offline Completed without error 00% 15032 -
#16 Short offline Completed without error 00% 15008 -
#17 Short offline Completed without error 00% 14984 -
#18 Short offline Completed without error 00% 14960 -
#19 Short offline Completed without error 00% 14936 -
#20 Short offline Completed without error 00% 14912 -
#21 Short offline Completed without error 00% 14888 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


y :



HP-OMEN:~ # inxi -xxxDsz
Drives:
Local Storage: total: 3.18 TiB used: 976.73 GiB (30.0%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WDS100T2X0C-00L350
size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 101140WD temp: 42.9 C scheme: GPT
ID-2: /dev/sda vendor: Seagate model: ST1000LM049-2GH172 size: 931.51 GiB
speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: RXM3 scheme: GPT
ID-3: /dev/sdb type: USB model: 1JMicron Tech size: 465.76 GiB type: N/A
serial: <filter> rev: 0208 scheme: GPT
ID-4: /dev/sdc type: USB vendor: Realtek model: RTL9210B NVME
size: 931.51 GiB type: SSD serial: <filter> rev: 1.00 scheme: MBR
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A gpu: nouveau temp: 49.0 C


Saludos cordiales .

PD. cuando termine mantenimiento, del pc que me falta, me busco uno de última generación de intel , con ddr4 o ddr5 y gen 5, si la vista no me engaño creo que tiene un ancho de banda superior a otro de dos canales

mikrios
12-Jul-2022, 00:50
Hola:


Para salir de dudas : Datos :



mikrios-15:~ # systemd-analyze
Startup finished in 7.146s (kernel) + 3.882s (initrd) + 12.275s (userspace) = 23.304s
graphical.target reached after 12.261s in userspace


mikrios-15:~ # inxi -Fz
System:
Kernel: 5.14.21-150400.22-default arch: x86_64 bits: 64 Console: pty pts/1
Distro: openSUSE Leap 15.4
Machine:
Type: Desktop Mobo: ASUSTeK model: PRIME X299-DELUXE II v: Rev 1.xx
serial: <filter> UEFI: American Megatrends v: 3601 date: 09/24/2021
CPU:
Info: 12-core model: Intel Core i9-10920X bits: 64 type: MT MCP cache:
L2: 12 MiB
Speed (MHz): avg: 1201 min/max: 1200/4800 cores: 1: 1200 2: 1200 3: 1202
4: 1203 5: 1203 6: 1200 7: 1201 8: 1203 9: 1202 10: 1200 11: 1202 12: 1201
13: 1203 14: 1202 15: 1203 16: 1202 17: 1202 18: 1200 19: 1202 20: 1203
21: 1202 22: 1200 23: 1200 24: 1203
Graphics:
Device-1: NVIDIA GP104 [GeForce GTX 1070] driver: nouveau v: kernel
Display: x11 server: X.Org v: 1.20.3 with: Xwayland v: 21.1.4 driver: X:
loaded: nouveau unloaded: fbdev,modesetting,vesa gpu: nouveau
resolution: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 21.2.4
Audio:
Device-1: Intel 200 Series PCH HD Audio driver: snd_hda_intel
Device-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel
Sound Server-1: ALSA v: k5.14.21-150400.22-default running: yes
Sound Server-2: PulseAudio v: 15.0 running: yes
Network:
Device-1: Intel Ethernet I219-V driver: e1000e
IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Aquantia AQC111 NBase-T/IEEE 802.3bz Ethernet [AQtion]
driver: atlantic
IF: eth0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb
Report: rfkill ID: hci0 state: up address: see --recommends
Drives:
Local Storage: total: 46.4 TiB used: 11.88 GiB (0.0%)
ID-1: /dev/nvme0n1 vendor: Western Digital
model: WD BLACK SN850 Heatsink 1TB size: 931.51 GiB
ID-2: /dev/nvme1n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB
ID-3: /dev/nvme2n1 vendor: Western Digital
model: WD BLACK SN850 Heatsink 1TB size: 931.51 GiB
ID-4: /dev/nvme3n1 vendor: Western Digital model: WDS100T1X0E-00AFY0
size: 931.51 GiB
ID-5: /dev/nvme4n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB
ID-6: /dev/nvme5n1 vendor: Western Digital model: WDS100T1X0E-00AFY0
size: 931.51 GiB
ID-7: /dev/nvme6n1 vendor: Western Digital model: WD BLACK AN1500
size: 1.82 TiB
ID-8: /dev/nvme7n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB
ID-9: /dev/sda vendor: Western Digital model: WD2005FBYZ-01YCBB3
size: 1.82 TiB
ID-10: /dev/sdb vendor: Western Digital model: WD2005FBYZ-01YCBB3
size: 1.82 TiB
ID-11: /dev/sdc vendor: Western Digital model: WD6003FRYZ-01F0DB0
size: 5.46 TiB
ID-12: /dev/sdd vendor: Western Digital model: WD2003FZEX-00SRLA0
size: 1.82 TiB
ID-13: /dev/sde vendor: Western Digital model: WD140EFGX-68B0GN0
size: 12.73 TiB
ID-14: /dev/sdf vendor: Western Digital model: WD161KRYZ-01AGBB0
size: 14.55 TiB
ID-15: /dev/sdg type: USB vendor: Toshiba model: TransMemory
size: 7.23 GiB
Partition:
ID-1: / size: 100 GiB used: 11.35 GiB (11.3%) fs: btrfs dev: /dev/nvme6n1p2
ID-2: /boot/efi size: 249.7 MiB used: 320 KiB (0.1%) fs: vfat
dev: /dev/nvme6n1p1
ID-3: /home size: 1.4 TiB used: 548.5 MiB (0.0%) fs: btrfs dev: /dev/sdd1
ID-4: /opt size: 100 GiB used: 11.35 GiB (11.3%) fs: btrfs
dev: /dev/nvme6n1p2
ID-5: /tmp size: 100 GiB used: 11.35 GiB (11.3%) fs: btrfs
dev: /dev/nvme6n1p2
ID-6: /var size: 100 GiB used: 11.35 GiB (11.3%) fs: btrfs
dev: /dev/nvme6n1p2
Swap:
ID-1: swap-1 type: partition size: 175 GiB used: 0 KiB (0.0%)
dev: /dev/sdd2


Sensors:
System Temperatures: cpu: 33.5 C mobo: 36.0 C gpu: nouveau temp: 42.0 C
Fan Speeds (RPM): fan-1: 783 fan-2: 1431 fan-3: 1048 fan-4: 0 fan-5: 0
fan-6: 4639 fan-7: 2402 gpu: nouveau fan: 0


Info:
Processes: 434 Uptime: 0h 5m Memory: 125.49 GiB used: 2.33 GiB (1.9%)
Shell: Bash inxi: 3.3.17






mikrios-15:~ # systemd-analyze
Startup finished in 7.146s (kernel) + 3.882s (initrd) + 12.275s (userspace) = 23.304s
graphical.target reached after 12.261s in userspace


Sensors:
System Temperatures: cpu: 33.5 C mobo: 36.0 C gpu: nouveau temp: 42.0 C
Fan Speeds (RPM): fan-1: 783 fan-2: 1431 fan-3: 1048 fan-4: 0 fan-5: 0
fan-6: 4639 fan-7: 2402 gpu: nouveau fan: 0
Info:
Processes: 434 Uptime: 0h 5m Memory: 125.49 GiB used: 2.33 GiB (1.9%)
Shell: Bash inxi: 3.3.


mikrios-x299-II:~ # systemd-analyze
Startup finished in 7.166s (kernel) + 4.026s (initrd) + 12.008s (userspace) = 23.201s
graphical.target reached after 11.995s in userspace




mikrios:~ # sensors
nouveau-pci-c100
Adapter: PCI adapter
fan1: 0 RPM
temp1: +41.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

nvme-pci-a200
Adapter: PCI adapter
Composite: +27.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 0: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 1: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 2: +30.0°C (high = +100.0°C, crit = +110.0°C)
Core 4: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 5: +30.0°C (high = +100.0°C, crit = +110.0°C)
Core 8: +30.0°C (high = +100.0°C, crit = +110.0°C)
Core 9: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 10: +30.0°C (high = +100.0°C, crit = +110.0°C)
Core 11: +30.0°C (high = +100.0°C, crit = +110.0°C)
Core 12: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 13: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 14: +30.0°C (high = +100.0°C, crit = +110.0°C)

nvme-pci-a300
Adapter: PCI adapter
Composite: +28.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +28.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a100
Adapter: PCI adapter
Composite: +27.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-4700
Adapter: PCI adapter
Composite: +29.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

eth0-pci-0400
Adapter: PCI adapter
PHY Temperature: +40.6°C
MAC Temperature: +49.6°C

nvme-pci-e200
Adapter: PCI adapter
Composite: +28.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a400
Adapter: PCI adapter
Composite: +26.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-e100
Adapter: PCI adapter
Composite: +51.9°C (low = -273.1°C, high = +69.8°C)
(crit = +69.8°C)
Sensor 1: +51.9°C (low = -273.1°C, high = +69.8°C)



Los ventiladores sus rpm se fueron de viaje .



mikrios:~ # inxi -xxxsSD
System:
Host: mikrios Kernel: 5.14.21-150400.22-default arch: x86_64 bits: 64
compiler: gcc v: 7.5.0 Console: pty pts/1 wm: kwin_x11 DM: SDDM
Distro: openSUSE Leap 15.4
Drives:
Local Storage: total: 46.39 TiB used: 38.07 GiB (0.1%)
ID-1: /dev/nvme0n1 vendor: Western Digital
model: WD BLACK SN850 Heatsink 1TB size: 931.51 GiB speed: 63.2 Gb/s
lanes: 4 type: SSD serial: 21503H457102 rev: 614600WD temp: 37.9 C
scheme: GPT
ID-2: /dev/nvme1n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: 201947449101
rev: 111110WD temp: 40.9 C scheme: GPT
ID-3: /dev/nvme2n1 vendor: Western Digital
model: WD BLACK SN850 Heatsink 1TB size: 931.51 GiB speed: 63.2 Gb/s
lanes: 4 type: SSD serial: 214160800835 rev: 614600WD temp: 33.9 C
scheme: GPT
ID-4: /dev/nvme3n1 vendor: Western Digital model: WDS100T1X0E-00AFY0
size: 931.51 GiB speed: 63.2 Gb/s lanes: 4 type: SSD serial: 214394462607
rev: 614600WD temp: 33.9 C scheme: GPT
ID-5: /dev/nvme4n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: 1908E6803920
rev: 102000WD temp: 34.9 C scheme: GPT
ID-6: /dev/nvme5n1 vendor: Western Digital model: WDS100T1X0E-00AFY0
size: 931.51 GiB speed: 63.2 Gb/s lanes: 4 type: SSD serial: 214394457705
rev: 614600WD temp: 31.9 C scheme: GPT
ID-7: /dev/nvme6n1 vendor: Western Digital model: WD BLACK AN1500
size: 1.82 TiB type: SSD serial: WUBT21220960 rev: 10271043
temp: 54° (327 Kelvin) C scheme: GPT
ID-8: /dev/nvme7n1 vendor: Western Digital model: WDS100T3X0C-00SJG0
size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: 201947461602
rev: 111110WD temp: 39.9 C scheme: GPT
ID-9: /dev/sda vendor: Western Digital model: WD2005FBYZ-01YCBB3
size: 1.82 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: WD-WCC6N6XLK301
rev: RR09 scheme: GPT
ID-10: /dev/sdb vendor: Western Digital model: WD2005FBYZ-01YCBB3
size: 1.82 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: WD-WCC6N6XLK43X
rev: RR09 scheme: GPT
ID-11: /dev/sdc vendor: Western Digital model: WD6003FRYZ-01F0DB0
size: 5.46 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: V8KT50AR
rev: 1H01 scheme: GPT
ID-12: /dev/sdd vendor: Western Digital model: WD2003FZEX-00SRLA0
size: 1.82 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: WD-WCC6N7DNSZ3F
rev: 1A01 scheme: GPT
ID-13: /dev/sde vendor: Western Digital model: WD140EFGX-68B0GN0
size: 12.73 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: Y5KSL6NC
rev: 0A85 scheme: GPT
ID-14: /dev/sdf vendor: Western Digital model: WD161KRYZ-01AGBB0
size: 14.55 TiB speed: 6.0 Gb/s type: HDD rpm: 7200 serial: 2CHLEZUP
rev: 1H01 scheme: GPT
Sensors:
System Temperatures: cpu: 32.0 C mobo: N/A gpu: nouveau temp: 42.0 C
Fan Speeds (RPM): N/A gpu: nouveau fan: 0



15.4

Saludos cordiales

mikrios
12-Jul-2022, 00:56
Hola:


TW

mikrios-x299-d-II:~ # sensors
nouveau-pci-c100
Adapter: PCI adapter
fan1: 0 RPM
temp1: +45.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

nct6796-isa-0290
Adapter: ISA adapter
Vcore: 952.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.38 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.30 V (min = +2.98 V, max = +3.63 V)
in4: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 208.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 680.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.38 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.14 V (min = +2.70 V, max = +3.63 V)
in9: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 672.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 416.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 232.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 504.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 767 RPM (min = 0 RPM)
fan2: 1400 RPM (min = 0 RPM)
fan3: 1043 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 4591 RPM (min = 0 RPM)
fan7: 2385 RPM (min = 0 RPM)
SYSTIN: +35.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +33.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +44.5°C sensor = thermistor
AUXTIN1: +44.0°C sensor = thermistor
AUXTIN2: +66.0°C sensor = thermistor
AUXTIN3: +57.0°C sensor = thermistor
PECI Agent 0: +34.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +110.0°C)
PECI Agent 0 Calibration: +33.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled

nvme-pci-a300
Adapter: PCI adapter
Composite: +35.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)

nvme-pci-a200
Adapter: PCI adapter
Composite: +34.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +38.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-e100
Adapter: PCI adapter
Composite: +56.9°C (low = -273.1°C, high = +69.8°C)
(crit = +69.8°C)
Sensor 1: +56.9°C (low = -273.1°C, high = +69.8°C)

enp4s0-pci-0400
Adapter: PCI adapter
PHY Temperature: +43.7°C
MAC Temperature: +52.9°C

nvme-pci-e200
Adapter: PCI adapter
Composite: +42.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 0: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 1: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 2: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 4: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 5: +31.0°C (high = +100.0°C, crit = +110.0°C)
Core 8: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 9: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 10: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 11: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 12: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 13: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 14: +31.0°C (high = +100.0°C, crit = +110.0°C)

nvme-pci-4700
Adapter: PCI adapter
Composite: +42.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a400
Adapter: PCI adapter
Composite: +33.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a100
Adapter: PCI adapter
Composite: +35.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)




Saludos cordiales

mikrios
12-Jul-2022, 01:04
Hola:

Leap 15.3



mikrios:~ # sensors
nouveau-pci-c100
Adapter: PCI adapter
fan1: 915 RPM
temp1: +40.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)

nct6796-isa-0290
Adapter: ISA adapter
Vcore: +0.95 V (min = +0.00 V, max = +1.74 V)
in1: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.38 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.30 V (min = +2.98 V, max = +3.63 V)
in4: +1.00 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.68 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.38 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.14 V (min = +2.70 V, max = +3.63 V)
in9: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.67 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.42 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.23 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.50 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 782 RPM (min = 0 RPM)
fan2: 1410 RPM (min = 0 RPM)
fan3: 1040 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 4671 RPM (min = 0 RPM)
fan7: 2385 RPM (min = 0 RPM)
SYSTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +34.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +44.5°C sensor = thermistor
AUXTIN1: +44.0°C sensor = thermistor
AUXTIN2: +66.0°C sensor = thermistor
AUXTIN3: +58.0°C sensor = thermistor
PECI Agent 0: +34.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +110.0°C)
PECI Agent 0 Calibration: +34.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled

nvme-pci-e200
Adapter: PCI adapter
Composite: +42.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM

nvme-pci-a400
Adapter: PCI adapter
Composite: +33.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a100
Adapter: PCI adapter
Composite: +35.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-0200
Adapter: PCI adapter
Composite: +39.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

eth0-pci-0400
Adapter: PCI adapter
PHY Temperature: +44.7°C
MAC Temperature: +54.0°C

nvme-pci-a300
Adapter: PCI adapter
Composite: +36.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +35.0°C (high = +100.0°C, crit = +110.0°C)
Core 0: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 1: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 2: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 4: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 5: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 8: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 9: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 10: +32.0°C (high = +100.0°C, crit = +110.0°C)
Core 11: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 12: +33.0°C (high = +100.0°C, crit = +110.0°C)
Core 13: +34.0°C (high = +100.0°C, crit = +110.0°C)
Core 14: +33.0°C (high = +100.0°C, crit = +110.0°C)

nvme-pci-4700
Adapter: PCI adapter
Composite: +43.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-a200
Adapter: PCI adapter
Composite: +35.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)

nvme-pci-e100
Adapter: PCI adapter
Composite: +58.9°C (low = -273.1°C, high = +69.8°C)
(crit = +69.8°C)
Sensor 1: +58.9°C (low = -273.1°C, high = +69.8°C)

mikrios:~ # inxi -xxxSz
System: Kernel: 5.3.18-150300.59.71-default x86_64 bits: 64 compiler: gcc v: 7.5.0 Console: tty 1 wm: kwin_x11 dm: SDDM
Distro: openSUSE Leap 15.3



En TW como suele estar a la última, se puede verificar con un live.

Saludos cordiales