PDA

View Full Version : Tumbleweed - instalacja drukarki HP LaserJet P1102w



Gary58
08-Nov-2019, 02:31
Open suse leap 15.1 z kde plasmą zainstalowałem drukarkę HP LaserJet P1102w.
Następnie uaktualniłęm system do Tumbleweed.
Po instalacji drukarka nie działa.
Usunąłem drukarkę, odinstalowałem hplip i ponownie zainstalowałem hplip za pomocą zyppera. Ponowna instalacja drukarki w terminalu za pomocą hp-setup nie idzie. Pojawia się GUI wybieram za pomocą usb i efekt jak niżej:


linuxG:/home/gary # hp-setup

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0


Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
Searching... (bus=usb, search=(None), desc=0)
error: Unable to load Qt4 support. Is it installed?
Traceback (most recent call last):
File "/usr/share/hplip/ui5/setupdialog.py", line 1297, in NextButton_clicked
self.showDevicesPage()
File "/usr/share/hplip/ui5/setupdialog.py", line 562, in showDevicesPage
smart_install.disable(GUI_MODE, 'qt4')
File "/usr/share/hplip/base/smart_install.py", line 236, in disable
dialog.exec_()
AttributeError: 'NoneType' object has no attribute 'exec_'
Przerwane (zrzut pamięci)




Wyłączałem zaporę, firewald, instalowałem przez terminal i z bezpośrednio z Yasta i efekt taki sam.

Pierwsze wrażenia z tumbleweed: uaktualnił się elegancko. Wszytko działa oprócz problemu z drukarką. Czasami lekk się przywiesza ale to chyba przypadłość plasmy, chociaż na opensuse leap tego nie zauważyłem.

Czy ktoś może pomóc ?

Ps. chciałem edytować tytuł ale nie mogę, powinienem dodać ,że chodzi o instalację drukarki.

Gary58
08-Nov-2019, 04:35
Odinstalowałem drukarkę, odinstalowałem i usunąłem wszelkie pliki hplip. Następnie ponowne uruchomienie komputera, wyłączenie zapory i ponowna instalacja w terminalu poleceniem hp-setup i doszłem do końca i znowu klops:


linuxG:/home/gary # hp-setup

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
Searching... (bus=usb, search=(None), desc=0)

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

warning: It is not recommended to run 'hp-plugin' in a root mode.

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the defa
ult.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.19.6 |
-----------------------------------------

Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recommended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)

Enter option (d=download*, p=specify path, q=quit) ? d

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0% Receiving digital
keys: /usr/bin/gpg --homedir /root/.hplip/.gnupg --no-permission-warning --keyserver po
ol.sks-keyservers.net --recv-keys 0x4ABA2F66DBD5A95894910E0673D770CDA59047B9


----------------------
| INSTALLING PLUG-IN |
----------------------

Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Plugin Self Extracting Archive...............................
...............................

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Installer ver. 3.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Plug-in version: 3.19.6
Installed HPLIP version: 3.19.6
Number of files to install: 64

You must agree to the license terms before installing the plug-in:

LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in


These License Terms govern your Use of the HPLIP Driver Plug-in Software (the
"Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT LIMITATION, ANY DOCUMENTATION, IS
SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS-IS WARRANTY STATEMENT. BY
DOWNLOADING AND INSTALLING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF
YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT DOWNLOAD AND INSTALL THE SOFTWARE ON YOUR
SYSTEM.


1. License Grant. HP grants you a license to Use one copy of the Software with HP
printing products only. "Use" includes using, storing, loading, installing, executing,
and displaying the Software. You may not modify the Software or disable any licensing or
control features of the Software.


2. Ownership. The Software is owned and copyrighted by HP or its third party suppliers.
Your license confers no title to, or ownership in, the Software and is not a sale of any
rights in the Software. HP's third party suppliers may protect their rights in the
Software in the event of any violation of these license terms.


3. Copies and Adaptations. You may only make copies or adaptations of the Software for
archival purposes or when copying or adaptation is an essential step in the authorized
Use of the Software. You must reproduce all copyright notices in the original Software
on all copies or adaptations. You may not copy the Software onto any public network.


4. No Disassembly. You may not Disassemble the Software unless HP's prior written
consent is obtained. "Disassemble" includes disassembling, decompiling, decrypting, and
reverse engineering. In some jurisdictions, HP's consent may not be required for limited
Disassembly. Upon request, you will provide HP with reasonably detailed information
regarding any Disassembly.


5. No Transfer. You may not assign, sublicense or otherwise transfer all or any part of
these License Terms or the Software.


6. Termination. HP may terminate your license, upon notice, for failure to comply with
any of these License Terms. Upon termination, you must immediately destroy the Software,
together with all copies, adaptations and merged portions in any form.


7. Export Requirements. You may not export or re-export the Software or any copy or
adaptation in violation of any applicable laws or regulations.


8. U.S. Government Restricted Rights. The Software has been developed entirely at
private expense. It is delivered and licensed, as defined in any applicable DFARS, FARS,
or other equivalent federal agency regulation or contract clause, as either "commercial
computer software" or "restricted computer software", whichever is applicable. You have
only those rights provided for such Software by the applicable clause or regulation or
by these License Terms.


9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HP AND
ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM ALL
OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, WARRANTIES OF TITLE AND NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES
OR CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF
VIRUSES ALL WITH REGARD TO THE SOFTWARE. Some states/jurisdictions do not allow
exclusion of implied warranties or limitations on the duration of implied warranties, so
the above disclaimer may not apply to you in its entirety.


10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur, the
entire liability of HP and any of its suppliers under any provision of this agreement
and your exclusive remedy for all of the foregoing shall be limited to the greater of
the amount actually paid by you separately for the Software or U.S. $5.00. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HP OR ITS SUPPLIERS BE
LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR
PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF
OR INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS
AGREEMENT, EVEN IF HP OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some states/jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.

Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y

Done.

Done.
error: The device you are trying to setup requires a binary plug-in. Some functionaliti
es may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to
install plug-ins. Visit http://hplipopensource.com for more infomation.


[/FONT]]

malcolmlewis
08-Nov-2019, 04:50
Witaj, uruchom jako program hp-setup, poprosi o hasło roota. Upewnij się również, że usługa systemd filiżanek jest uruchomiona.

Gary58
08-Nov-2019, 04:53
Dalej...Weszłem do HP Device Manager - HP... , Install Required Plugin i zainstalował się. Uruchomiłem wydruk działa. No ale po wyłączeniu drukarki i kabla na usb ponownie włączyłem i już du...pa. Nie drukuje. W kolejce drukowania - oczekuje. Nie mam pojęcia co jeszcze mogę zrobić.

Gary58
08-Nov-2019, 05:08
Witaj, uruchom jako program hp-setup, poprosi o hasło roota. Upewnij się również, że usługa systemd filiżanek jest uruchomiona.]

Ponownie w terminalu : hp-setup :


gary@linuxG:~> hp-setup

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching... (bus=usb, search=(None), desc=0)

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Checking for network connection...
Downloading plug-in from:
Receiving digital keys: /usr/bin/gpg --homedir /home/gary/.hplip/.gnupg --no-permission-
warning --keyserver pool.sks-keyservers.net --recv-keys 0x4ABA2F66DBD5A95894910E0673D770
CDA59047B9
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Plugin Self Extracting Archive...............................
...............................

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Installer ver. 3.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Plug-in version: 3.19.6
Installed HPLIP version: 3.19.6
Number of files to install: 64

note: Using PyQt5

Done.
Plug-in installation successful

Done.
error: The device you are trying to setup requires a binary plug-in. Some functionaliti
es may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to
install plug-ins. Visit http://hplipopensource.com for more infomation.







Upewnij się również, że usługa systemd filiżanek jest uruchomiona ? Weszłem w Yast- meneger usług , tam jest sporo systemd, nie wiem która ?

malcolmlewis
08-Nov-2019, 05:41
Done.
error: The device you are trying to setup requires a binary plug-in. Some functionaliti
es may not work as expected without plug-ins. Please run 'hp-plugin' as normal user to
install plug-ins. Visit http://hplipopensource.com for more infomation.



Upewnij się również, że usługa systemd filiżanek jest uruchomiona ? Weszłem w Yast- meneger usług , tam jest sporo systemd, nie wiem która ?

Please run 'hp-plugin' as normal user to
install plug-ins.

Uruchom „hp-plugin” jak zwykły użytkownik
zainstaluj wtyczki.

Gary58
08-Nov-2019, 05:48
[HTML] Please run 'hp-plugin' as normal user to
install plug-ins.

Uruchom „hp-plugin” jak zwykły użytkownik
zainstaluj wtyczki. [/HTML

Dobrze ale gdzie to mam zrobić ? W terminalu, w Yast czy wchodząc w ustawienia ?

malcolmlewis
08-Nov-2019, 05:53
[HTML] Please run 'hp-plugin' as normal user to
install plug-ins.

Uruchom „hp-plugin” jak zwykły użytkownik
zainstaluj wtyczki. [/HTML

Dobrze ale gdzie to mam zrobić ? W terminalu, w Yast czy wchodząc w ustawienia ?

Z terminala

Gary58
08-Nov-2019, 05:57
OK. Zainstalował się ale dalej nie drukuje.


gary@linuxG:~> hp-plugin

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1


Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.




HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1


Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


Checking for network connection...
Downloading plug-in from:
Receiving digital keys: /usr/bin/gpg --homedir /home/gary/.hplip/.gnupg --no-permission-warning --keyserver pool.sks-keyservers.net --recv-keys 0x4ABA2F66DBD5A95894910E0673D770CDA59047B9
Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Plugin Self Extracting Archive..............................................................


HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Installer ver. 3.0


Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


Plug-in version: 3.19.6
Installed HPLIP version: 3.19.6
Number of files to install: 64


note: Using PyQt5

Done.
Plug-in installation successful


Done.
gary@linuxG:~>

malcolmlewis
08-Nov-2019, 06:05
Przełącz na użytkownika root



su -
systemctl start cups
systemctl status cups
hp-setup


Po zakończeniu, jak uruchamiasz hp-toolbox

Gary58
08-Nov-2019, 06:09
gary@linuxG:~> su
Hasło:
linuxG:/home/gary # systemctl start cups
linuxG:/home/gary # systemctl status cups
● cups.service - CUPS Scheduler
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: enable>
Active: active (running) since Fri 2019-11-08 12:20:45 CET; 1h 45min ago
Docs: man:cupsd(8)
Main PID: 1396 (cupsd)
Tasks: 2 (limit: 4425)
Memory: 111.1M
CGroup: /system.slice/cups.service
├─1396 /usr/sbin/cupsd -l
└─5109 /usr/lib/cups/notifier/dbus dbus://

lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 427: Found interface conf=0, iface=0,>
lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 389: Active kernel driver on interfac>
lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 535: claimed 7/1/2 interface
lis 08 13:42:46 linuxG hp[15004]: prnt/backend/hp.c 376: read new pjl status: 10023
lis 08 13:42:54 linuxG hp[15004]: prnt/backend/hp.c 378: read pjl job_end: 1
lis 08 13:42:54 linuxG hp[15004]: prnt/backend/hp.c 376: read new pjl status: 10001
lis 08 13:42:56 linuxG hp[15004]: io/hpmud/musb.c 561: released 7/1/2 interface
lis 08 13:42:56 linuxG hp[15004]: io/hpmud/musb.c 975: removed PRINT channel=2 clientCn>
lis 08 13:43:57 linuxG hp[15109]: io/hpmud/musb.c 1151: unable to open hp:/usb/HP_Laser>
lis 08 13:43:57 linuxG hp[15109]: prnt/backend/hp.c 824: ERROR: open device failed stat>
linuxG:/home/gary # hp-setup

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
Searching... (bus=usb, search=(None), desc=0)
error: Unable to load Qt4 support. Is it installed?
Traceback (most recent call last):
File "/usr/share/hplip/ui5/setupdialog.py", line 1297, in NextButton_clicked
self.showDevicesPage()
File "/usr/share/hplip/ui5/setupdialog.py", line 562, in showDevicesPage
smart_install.disable(GUI_MODE, 'qt4')
File "/usr/share/hplip/base/smart_install.py", line 236, in disable
dialog.exec_()
AttributeError: 'NoneType' object has no attribute 'exec_'
Przerwane (zrzut pamięci)
linuxG:/home/gary #

malcolmlewis
08-Nov-2019, 06:21
gary@linuxG:~> su
Hasło:
linuxG:/home/gary # systemctl start cups
linuxG:/home/gary # systemctl status cups
● cups.service - CUPS Scheduler
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: enable>
Active: active (running) since Fri 2019-11-08 12:20:45 CET; 1h 45min ago
Docs: man:cupsd(8)
Main PID: 1396 (cupsd)
Tasks: 2 (limit: 4425)
Memory: 111.1M
CGroup: /system.slice/cups.service
├─1396 /usr/sbin/cupsd -l
└─5109 /usr/lib/cups/notifier/dbus dbus://

lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 427: Found interface conf=0, iface=0,>
lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 389: Active kernel driver on interfac>
lis 08 13:42:45 linuxG hp[15004]: io/hpmud/musb.c 535: claimed 7/1/2 interface
lis 08 13:42:46 linuxG hp[15004]: prnt/backend/hp.c 376: read new pjl status: 10023
lis 08 13:42:54 linuxG hp[15004]: prnt/backend/hp.c 378: read pjl job_end: 1
lis 08 13:42:54 linuxG hp[15004]: prnt/backend/hp.c 376: read new pjl status: 10001
lis 08 13:42:56 linuxG hp[15004]: io/hpmud/musb.c 561: released 7/1/2 interface
lis 08 13:42:56 linuxG hp[15004]: io/hpmud/musb.c 975: removed PRINT channel=2 clientCn>
lis 08 13:43:57 linuxG hp[15109]: io/hpmud/musb.c 1151: unable to open hp:/usb/HP_Laser>
lis 08 13:43:57 linuxG hp[15109]: prnt/backend/hp.c 824: ERROR: open device failed stat>
linuxG:/home/gary # hp-setup

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
QStandardPaths: wrong ownership on runtime directory /run/user/1000, 1000 instead of 0
Searching... (bus=usb, search=(None), desc=0)
error: Unable to load Qt4 support. Is it installed?
Traceback (most recent call last):
File "/usr/share/hplip/ui5/setupdialog.py", line 1297, in NextButton_clicked
self.showDevicesPage()
File "/usr/share/hplip/ui5/setupdialog.py", line 562, in showDevicesPage
smart_install.disable(GUI_MODE, 'qt4')
File "/usr/share/hplip/base/smart_install.py", line 236, in disable
dialog.exec_()
AttributeError: 'NoneType' object has no attribute 'exec_'
Przerwane (zrzut pamięci)
linuxG:/home/gary #


Więc nie używasz jako drukarki bezprzewodowej, ale USB?

Używam jako drukarki bezprzewodowej.

malcolmlewis
08-Nov-2019, 06:24
Otwórz terminal jako użytkownik i uruchom;



hp-doctor

Gary58
08-Nov-2019, 06:26
Tak. Przez USB bo przez wi-fi drukarka będzie chodzić jedynie na windows a nie mam windowsa pod ręką i nie mogę wgrać sterownik do drukarki, żeby wskazywała połączenie poprzez wi-fi. Także łączę za pomocą USB i tak mi działała w opensuse leap 15.1.

Gary58
08-Nov-2019, 06:33
gary@linuxG:~> hp-doctor

HP Linux Imaging and Printing System (ver. 3.19.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.19.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.



Checking for Deprecated items....
error: This distro (i.e suse 20191104) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no
):y


Checking for HPLIP updates....

HP Linux Imaging and Printing System (ver. 3.19.6)
HPLIP upgrade latest version ver. 1.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

error: HPLIP upgrade is disabled by openSUSE for security reasons, see https://bugzilla.
novell.com/show_bug.cgi?id=853405 - if you like to upgrade HPLIP, use an openSUSE softwa
re package manager like YaST or zypper.

Done.
error: Failed to upgrade latest HPLIP. Is hp-upgrade already running (i.e. foreground or
background)?


Checking for Dependencies....
warning: 3-20191104 version is not supported. Using 3-15.0 versions dependencies to veri
fy and install...

---------------
| SYSTEM INFO |
---------------

Kernel: 5.3.8-1-default #1 SMP Wed Oct 30 07:12:05 UTC 2019 (ea4c828) GNU/Linux
Host: linuxG
Proc: 5.3.8-1-default #1 SMP Wed Oct 30 07:12:05 UTC 2019 (ea4c828) GNU/Linux
Distribution: 3 20191104
Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.19.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 3 distro 20191104 v
ersion

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.19.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.19.6
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.19.6



Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan =

[fax]
email_address =
voice_phone =

[last_used]
device_uri = "hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W401SNASI1c"
printer_name = HP-LaserJet-Professional-P-1102w
working_dir = .

[polling]
device_list =
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 0

[upgrade]
last_upgraded_time = 1573213237
notify_upgrade = false
pending_upgrade_time = 0

[installation]
date_time = 11/08/19 14:32:23
version = 3.19.6


<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-
Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

cups CUPS - Common Unix Printing System REQUI
RED 1.1 2.3 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewe
r REQUIRED 7.05 9.27 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIO
NAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIO
NAL 1.0 1.0.27 OK -
error: dbus DBus - Message bus system REQUI
RED - 1.12.12 MISSING 'DBUS may not be installed or not
running'
policykit PolicyKit - Administrative policy framework OPTIO
NAL - 0.116 OK -
network network -wget OPTIO
NAL - 1.20.3 OK -
error: avahi-utils avahi-utils OPTIO
NAL - - MISSING 'avahi-utils needs to be installed
'

------------------------
| General Dependencies |
------------------------

error: libjpeg libjpeg - JPEG library REQUI
RED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUI
RED - 2.3 MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUI
RED - 2.3 MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUI
RED - b'2.30' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUI
RED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUI
RED - - OK -
error: sane-devel SANE - Scanning library development files REQUI
RED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files RE
QUIRED 5.0.9 5.8 MISSING 'libnetsnmp-devel needs to be i
nstalled'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUI
RED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUI
RED 2.2 3.7.3 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop not
ifications OPTIONAL - - MISSING 'python3-notify2 n
eeds to be installed'
Traceback (most recent call last):
File "/usr/bin/hp-doctor", line 297, in <module>
num_errors, num_warns = dep.validate(DEPENDENCY_RUN_AND_COMPILE_TIME, False)
File "/usr/share/hplip/check.py", line 368, in validate
self.core.dependencies[dep])
File "/usr/share/hplip/check.py", line 210, in __update_deps_info
installed_ver = self.core.version_func[deps_info[6]]()
File "/usr/share/hplip/installer/dcheck.py", line 303, in get_pyQt4_version
from PyQt4 import QtCore
ImportError: cannot import name 'QtCore' from 'PyQt4' (unknown location)
gary@linuxG:~>

malcolmlewis
08-Nov-2019, 06:37
Tak. Przez USB bo przez wi-fi drukarka będzie chodzić jedynie na windows a nie mam windowsa pod ręką i nie mogę wgrać sterownik do drukarki, żeby wskazywała połączenie poprzez wi-fi. Także łączę za pomocą USB i tak mi działała w opensuse leap 15.1.



hp-setup -i -a

Gary58
08-Nov-2019, 06:57
gary@linuxG:~> hp-setup -i -a

HP Linux Imaging and Printing System (ver. 3.19.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------

Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)

Enter number 0...1 for connection type (q=quit, enter=usb*) ?

Using connection type: usb


Setting up device: hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W401SNASI1c



------------------------
| PLUG-IN INSTALLATION |
------------------------


HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Download and Install Utility ver. 2.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the defa
ult.)


-----------------------------------------
| PLUG-IN INSTALLATION FOR HPLIP 3.19.6 |
-----------------------------------------

Option Description
---------- --------------------------------------------------
d Download plug-in from HP (recommended)
p Specify a path to the plug-in (advanced)
q Quit hp-plugin (skip installation)

Enter option (d=download*, p=specify path, q=quit) ? d

-------------------
| DOWNLOAD PLUGIN |
-------------------

Checking for network connection...
Downloading plug-in from:
Downloading plug-in: [\ ] 0% Receiving digital
keys: /usr/bin/gpg --homedir /home/gary/.hplip/.gnupg --no-permission-warning --keyserv
er pool.sks-keyservers.net --recv-keys 0x4ABA2F66DBD5A95894910E0673D770CDA59047B9


----------------------
| INSTALLING PLUG-IN |
----------------------

Creating directory plugin_tmp
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.6 Plugin Self Extracting Archive...............................
...............................

HP Linux Imaging and Printing System (ver. 3.19.6)
Plugin Installer ver. 3.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Plug-in version: 3.19.6
Installed HPLIP version: 3.19.6
Number of files to install: 64

You must agree to the license terms before installing the plug-in:

LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in


These License Terms govern your Use of the HPLIP Driver Plug-in Software (the
"Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT LIMITATION, ANY DOCUMENTATION, IS
SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS-IS WARRANTY STATEMENT. BY
DOWNLOADING AND INSTALLING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF
YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT DOWNLOAD AND INSTALL THE SOFTWARE ON YOUR
SYSTEM.


1. License Grant. HP grants you a license to Use one copy of the Software with HP
printing products only. "Use" includes using, storing, loading, installing, executing,
and displaying the Software. You may not modify the Software or disable any licensing or
control features of the Software.


2. Ownership. The Software is owned and copyrighted by HP or its third party suppliers.
Your license confers no title to, or ownership in, the Software and is not a sale of any
rights in the Software. HP's third party suppliers may protect their rights in the
Software in the event of any violation of these license terms.


3. Copies and Adaptations. You may only make copies or adaptations of the Software for
archival purposes or when copying or adaptation is an essential step in the authorized
Use of the Software. You must reproduce all copyright notices in the original Software
on all copies or adaptations. You may not copy the Software onto any public network.


4. No Disassembly. You may not Disassemble the Software unless HP's prior written
consent is obtained. "Disassemble" includes disassembling, decompiling, decrypting, and
reverse engineering. In some jurisdictions, HP's consent may not be required for limited
Disassembly. Upon request, you will provide HP with reasonably detailed information
regarding any Disassembly.


5. No Transfer. You may not assign, sublicense or otherwise transfer all or any part of
these License Terms or the Software.


6. Termination. HP may terminate your license, upon notice, for failure to comply with
any of these License Terms. Upon termination, you must immediately destroy the Software,
together with all copies, adaptations and merged portions in any form.


7. Export Requirements. You may not export or re-export the Software or any copy or
adaptation in violation of any applicable laws or regulations.


8. U.S. Government Restricted Rights. The Software has been developed entirely at
private expense. It is delivered and licensed, as defined in any applicable DFARS, FARS,
or other equivalent federal agency regulation or contract clause, as either "commercial
computer software" or "restricted computer software", whichever is applicable. You have
only those rights provided for such Software by the applicable clause or regulation or
by these License Terms.


9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HP AND
ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM ALL
OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, WARRANTIES OF TITLE AND NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES
OR CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF
VIRUSES ALL WITH REGARD TO THE SOFTWARE. Some states/jurisdictions do not allow
exclusion of implied warranties or limitations on the duration of implied warranties, so
the above disclaimer may not apply to you in its entirety.


10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur, the
entire liability of HP and any of its suppliers under any provision of this agreement
and your exclusive remedy for all of the foregoing shall be limited to the greater of
the amount actually paid by you separately for the Software or U.S. $5.00. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HP OR ITS SUPPLIERS BE
LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR
PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF
OR INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS
AGREEMENT, EVEN IF HP OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some states/jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.

Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? y
Please enter the root/superuser password:

Done.

Done.

---------------------
| PRINT QUEUE SETUP |
---------------------

Using queue name: HP_LaserJet_Professional_P_1102w
Locating PPD file... Please wait.

Found PPD file: /usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_profess
ional_p_1102w.ppd.gz
Description:

Adding print queue to CUPS:
Device URI: hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W401SNASI1c
Queue name: HP_LaserJet_Professional_P_1102w
PPD file: /usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_professional_
p_1102w.ppd.gz
Location:
Information: HP LaserJet Professional P 1102w Device (Automatically setup by HPLIP)


You do not have permission to add a printer. You need authentication.
Username: gary
Password:
error: Printer queue setup failed. Error : successful-ok-ignored-or-substituted-attribut
es
gary@linuxG:~>

malcolmlewis
08-Nov-2019, 07:21
gary@linuxG:~> hp-setup -i -a
...
You do not have permission to add a printer. You need authentication.
Username: gary
Password:
error: Printer queue setup failed. Error : successful-ok-ignored-or-substituted-attribut
es
gary@linuxG:~>




You do not have permission to add a printer. You need authentication.
Username: gary
Password:

Username: root
Password: <root user password>

Gary58
08-Nov-2019, 07:22
Drukuje tylko jak wejdę po dodaniu do druku w "ustawienia drukarek" , "otwórz kolejkę do drukowania" "wznów drukarkę" wtedy pojawia się monit o hasło i wtedy drukuje. Po odłączeniu USB i ponownie sytuacja się powtarza.

Gary58
08-Nov-2019, 07:37
No nic. Mam dość.
Bardzo dziękuję za pomoc ale narazie rezygnuję Tumbleweed . Wracam do Opensuse leap. Tam drukarka działała.
Pozdrawiam.

malcolmlewis
08-Nov-2019, 07:41
Drukuje tylko jak wejdę po dodaniu do druku w "ustawienia drukarek" , "otwórz kolejkę do drukowania" "wznów drukarkę" wtedy pojawia się monit o hasło i wtedy drukuje. Po odłączeniu USB i ponownie sytuacja się powtarza.

http://localhost:631

876

Gary58
08-Nov-2019, 09:29
Nie , nie poddałem się !


Nie dawało mi to spokoju. Więc usunąłem drukarkę i zacząłem od nowa:


1.Wpierw zrobiłem 'zypper dup" no i akurat były aktualizacje.
2.Wyłączyłem zaporę.
3.Zainstalowałem drukarkę w terminalu jako zwykły użytkownik z "hp-setup"
4.Zainstalowałem jako zwykły użytkownik w terminalu "hp-plugin"
5.Musiałem wejść w "ustawienia drukarki", "wznów drukarkę"
6.Po tym już drukarka działała.
7.Następnie dla sprawdzenia, odłączyłem kabel USB, ponownie uruchomiłem laptopa z zaporą i drukarka nadal drukuje. Czyli jest OK.

Prośba dla moderatora forum, żeby zmienił mi pierwszy tytuł bo jest mylący. Powinno być Tumbleweed - instalacja drukarki HP LaserJet P1102w.

Dziękuję.

malcolmlewis
08-Nov-2019, 09:55
Nie , nie poddałem się !


Nie dawało mi to spokoju. Więc usunąłem drukarkę i zacząłem od nowa:


1.Wpierw zrobiłem 'zypper dup" no i akurat były aktualizacje.
2.Wyłączyłem zaporę.
3.Zainstalowałem drukarkę w terminalu jako zwykły użytkownik z "hp-setup"
4.Zainstalowałem jako zwykły użytkownik w terminalu "hp-plugin"
5.Musiałem wejść w "ustawienia drukarki", "wznów drukarkę"
6.Po tym już drukarka działała.
7.Następnie dla sprawdzenia, odłączyłem kabel USB, ponownie uruchomiłem laptopa z zaporą i drukarka nadal drukuje. Czyli jest OK.

Prośba dla moderatora forum, żeby zmienił mi pierwszy tytuł bo jest mylący. Powinno być Tumbleweed - instalacja drukarki HP LaserJet P1102w.

Dziękuję.

Dobra robota, ciesz się :)

Tytuł wątku został zmieniony, jeśli potrzebujesz go zmienić, po prostu opublikuj wcześniej, ponieważ każdy post wymaga edycji ;)