usb recognition problem

JohnDragonFly · October 16, 2013, 12:16pm

Hello every one I’ve recently installed the open suse 12.3
and I’m using the Linux system for the first time in my life so I should bee taken as a very beginner
the problem I have is when the system is booting the usb ports are not being recognized and I’m not able to use my external HDD ot any thumb drive
I’m receiving this message of error along with other errors
usb 2-1: device not accepting address 2, error -110
I hope some one can help

                                                  regards

LewsTherinTelemon · October 16, 2013, 1:23pm

Hello and welcome to the OpenSuse forums!

Let’s collect some additional information to help zero in on the issue. Can you please run the following commands after a fresh boot and post the output here? (Surround the output using the code tag button above.)

You must run these commands as the root user in the command line. You may start a root shell by clicking on the Geko (or alt-f2) and searching for “root shell”.

Commands:

dmesg
lspci
lsmod
uname -a

Also, have a look in your bios and see if there are any BIOS settings related to USB which might apply.

LewsTherin

JohnDragonFly · October 17, 2013, 3:36pm

Hello Lews](https://forums.opensuse.org/members/lewstherintelemon.html) I’ve run the codes you supported me and her r the responses

dmesg
    0.000000] Initializing cgroup subsys cpuset
    0.000000] Initializing cgroup subsys cpu
    0.000000] Linux version 3.7.10-1.16-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba)
    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=e9582f58-8bb8-429c-ac70-0d1f5b62526f acpi=off video=1600x900 resume=/dev/disk/by-id/ata-WDC_WD7500BPVT-60HXZT1_WD-WX91A6158784-part6 splash=silent quiet showopts
    0.000000] e820: BIOS-provided physical RAM map:
    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
    0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001dfdfffff] usable
    0.000000] NX (Execute Disable) protection: active
    0.000000] SMBIOS 2.7 present.
    0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC      /1672, BIOS F.32 07/28/2011
    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    0.000000] No AGP bridge found
    0.000000] e820: last_pfn = 0x1dfe00 max_arch_pfn = 0x400000000
    0.000000] MTRR default type: uncachable
    0.000000] MTRR fixed ranges enabled:
    0.000000]   00000-9FFFF write-back
    0.000000]   A0000-BFFFF uncachable                                        
    0.000000]   C0000-E7FFF write-protect
    0.000000]   E8000-EFFFF write-combining
    0.000000]   F0000-FFFFF write-protect
    0.000000] MTRR variable ranges enabled:
    0.000000]   0 base 000000000 mask F80000000 write-back
    0.000000]   1 base 080000000 mask FE0000000 write-back
    0.000000]   2 base 09D000000 mask FFF000000 uncachable
    0.000000]   3 base 09E000000 mask FFE000000 uncachable
    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
    0.000000]   5 base 100000000 mask F00000000 write-back
    0.000000]   6 base 1DFE00000 mask FFFE00000 uncachable
    0.000000]   7 base 1E0000000 mask FE0000000 uncachable
    0.000000]   8 disabled
    0.000000]   9 disabled

    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    0.000000] reserving inaccessible SNB gfx pages
    0.000000] init_memory_mapping: [mem 0x00000000-0x9cffffff]
    0.000000]  [mem 0x00000000-0x9cffffff] page 2M
    0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fffc000-0x1fffffff]
    0.000000] init_memory_mapping: [mem 0x100000000-0x1dfdfffff]
    0.000000]  [mem 0x100000000-0x1dfdfffff] page 2M
    0.000000] kernel direct mapping tables up to 0x1dfdfffff @ [mem 0x9ce3a000-0x9ce3efff]
    0.000000] RAMDISK: [mem 0x3401a000-0x36004fff]
    0.000000] No NUMA configuration found
    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001dfdfffff]
    0.000000] Initmem setup node 0 [mem 0x00000000-0x1dfdfffff]
    0.000000]   NODE_DATA [mem 0x1dfdec000-0x1dfdfffff]
    0.000000]  [ffffea0000000000-ffffea00069fffff] PMD -> [ffff8801d9400000-ffff8801de9fffff] on node 0
    0.000000] Zone ranges:
    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
    0.000000]   Normal   [mem 0x100000000-0x1dfdfffff]
    0.000000] Movable zone start for each node
    0.000000] Early memory node ranges
    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
    0.000000]   node   0: [mem 0x00100000-0x9ce3efff]
    0.000000]   node   0: [mem 0x9cfff000-0x9cffffff]
    0.000000]   node   0: [mem 0x100000000-0x1dfdfffff]
    0.000000] On node 0 totalpages: 1559501
    0.000000]   DMA zone: 56 pages used for memmap
    0.000000]   DMA zone: 141 pages reserved
    0.000000]   DMA zone: 3784 pages, LIFO batch:0
    0.000000]   DMA32 zone: 14280 pages used for memmap
    0.000000]   DMA32 zone: 624248 pages, LIFO batch:31
    0.000000]   Normal zone: 12537 pages used for memmap
    0.000000]   Normal zone: 904455 pages, LIFO batch:31
    0.000000] Intel MultiProcessor Specification v1.4
    0.000000] MPTABLE: OEM ID: Insyde  
    0.000000] MPTABLE: Product ID: HuronRiver  
    0.000000] MPTABLE: APIC at: 0xFEE00000
    0.000000] Processor #0 (Bootup-CPU)
    0.000000] Processor #2
    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    0.000000] Processors: 2

    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    0.000000] nr_irqs_gsi: 40
    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
    0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
    0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
    0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
    0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    0.000000] Booting paravirtualized kernel on bare hardware
    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801dfa00000 s81856 r8192 d20544 u1048576
    0.000000] pcpu-alloc: s81856 r8192 d20544 u1048576 alloc=1*2097152
    0.000000] pcpu-alloc: [0] 0 1
    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1532487
    0.000000] Policy zone: Normal
    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=e9582f58-8bb8-429c-ac70-0d1f5b62526f acpi=off video=1600x900 resume=/dev/disk/by-id/ata-WDC_WD7500BPVT-60HXZT1_WD-WX91A6158784-part6 splash=silent quiet showopts
    0.000000] bootsplash: silent mode.
    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    0.000000] __ex_table already sorted, skipping sort
    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    0.000000] Checking aperture...
    0.000000] No AGP bridge found
    0.000000] Memory: 6036216k/7862272k available (5769k kernel code, 1624268k absent, 201788k reserved, 5184k data, 992k init)
    0.000000] Preemptible hierarchical RCU implementation.
    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
    0.000000] NR_IRQS:33024 nr_irqs:512 16
    0.000000] Console: colour dummy device 80x25
    0.000000] console [tty0] enabled

    0.000000] allocated 25165824 bytes of page_cgroup
    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    0.001000] tsc: Fast TSC calibration using PIT
    0.002000] tsc: Detected 2394.553 MHz processor
    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.10 BogoMIPS (lpj=2394553)
    0.000004] pid_max: default: 32768 minimum: 301
    0.000030] Security Framework initialized
    0.000041] AppArmor: AppArmor initialized
    0.000533] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    0.002169] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    0.002890] Mount-cache hash table entries: 256
    0.003039] Initializing cgroup subsys cpuacct
    0.003040] Initializing cgroup subsys memory
    0.003051] Initializing cgroup subsys devices
    0.003052] Initializing cgroup subsys freezer
    0.003053] Initializing cgroup subsys net_cls
    0.003055] Initializing cgroup subsys blkio
    0.003056] Initializing cgroup subsys perf_event
    0.003058] Initializing cgroup subsys hugetlb
    0.003080] CPU: Physical Processor ID: 0
    0.003081] CPU: Processor Core ID: 0
    0.003085] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    0.003085] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    0.003088] mce: CPU supports 7 MCE banks
    0.003097] CPU0: Thermal monitoring handled by SMI
    0.003104] process: using mwait in idle threads
    0.003108] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    0.003108] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    0.003108] tlb_flushall_shift: 5
    0.003211] Freeing SMP alternatives: 20k freed
    0.004834] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    0.014825] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
    0.218416] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    0.218421] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    0.218423] ... version:                3
    0.218424] ... bit width:              48
    0.218425] ... generic registers:      4
    0.218426] ... value mask:             0000ffffffffffff
    0.218427] ... max period:             000000007fffffff
    0.218428] ... fixed-purpose events:   3
    0.218429] ... event mask:             000000070000000f
    0.226533] smpboot: Booting Node   0, Processors  #1 OK
    0.237653] CPU1: Thermal monitoring handled by SMI
    0.239776] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    0.239785] Brought up 2 CPUs
    0.239787] smpboot: Total of 2 processors activated (9578.21 BogoMIPS)
    0.241310] devtmpfs: initialized
    0.242339] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    0.242437] RTC time: 15:51:49, date: 10/17/13
    0.242473] NET: Registered protocol family 16
    0.242677] PCI: Using configuration type 1 for base access
    0.242812] mtrr: your CPUs had inconsistent variable MTRR settings
    0.242813] mtrr: probably your BIOS does not setup all CPUs.
    0.242814] mtrr: corrected configuration.
    0.243426] bio: create slab <bio-0> at 0
    0.243480] ACPI: Interpreter disabled.
    0.243515] vgaarb: loaded
    0.243582] SCSI subsystem initialized
    0.243607] libata version 3.00 loaded.
    0.243637] usbcore: registered new interface driver usbfs
    0.243644] usbcore: registered new interface driver hub
    0.243662] usbcore: registered new device driver usb
    0.243708] PCI: Probing PCI hardware
    0.243710] PCI: root bus 00: using default resources
    0.243711] PCI: Probing PCI hardware (bus 00)
    0.243734] PCI host bridge to bus 0000:00
    0.243737] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    0.243739] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
    0.243741] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    0.243750] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    0.243784] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    0.243815] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    0.243828] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
    0.243856] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
    0.243869] pci 0000:00:01.2: [8086:0109] type 01 class 0x060400
    0.243897] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
    0.243913] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    0.243923] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
    0.243929] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
    0.243933] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]

JohnDragonFly · October 17, 2013, 3:41pm

    0.243988] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    0.244011] pci 0000:00:16.0: reg 10: [mem 0xc3604000-0xc360400f 64bit]
    0.244088] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    0.244124] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    0.244419] pci 0000:00:1a.0: reg 10: [mem 0xc3609000-0xc36093ff]
    0.246127] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    0.246155] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    0.246170] pci 0000:00:1b.0: reg 10: [mem 0xc3600000-0xc3603fff 64bit]
    0.246239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    0.246263] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    0.246342] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    0.246367] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
    0.246446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    0.246471] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
    0.246550] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    0.246586] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    0.246875] pci 0000:00:1d.0: reg 10: [mem 0xc3608000-0xc36083ff]
    0.248575] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    0.248603] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    0.248731] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    0.248750] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
    0.248758] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
    0.248766] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
    0.248774] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
    0.248783] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
    0.248791] pci 0000:00:1f.2: reg 24: [mem 0xc3607000-0xc36077ff]
    0.248837] pci 0000:00:1f.2: PME# supported from D3hot
    0.248857] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    0.248873] pci 0000:00:1f.3: reg 10: [mem 0xc3605000-0xc36050ff 64bit]
    0.248894] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
    0.248956] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
    0.248970] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
    0.248981] pci 0000:01:00.0: reg 18: [mem 0xc2600000-0xc261ffff 64bit]
    0.248989] pci 0000:01:00.0: reg 20: [io  0x4000-0x40ff]
    0.249004] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    0.249040] pci 0000:01:00.0: supports D1 D2
    0.250736] pci 0000:00:01.0: PCI bridge to [bus 01]
    0.250744] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
    0.250751] pci 0000:00:01.0:   bridge window [mem 0xc2600000-0xc35fffff]
    0.250760] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    0.250817] pci 0000:00:01.1: PCI bridge to [bus 02]
    0.250854] pci 0000:00:01.2: PCI bridge to [bus 03]
    0.250959] pci 0000:04:00.0: [14e4:4727] type 00 class 0x028000
    0.250990] pci 0000:04:00.0: reg 10: [mem 0xc2500000-0xc2503fff 64bit]
    0.251153] pci 0000:04:00.0: supports D1 D2
    0.252740] pci 0000:00:1c.0: PCI bridge to [bus 04]
    0.252754] pci 0000:00:1c.0:   bridge window [mem 0xc2500000-0xc25fffff]
    0.252874] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    0.252893] pci 0000:05:00.0: reg 10: [io  0x3000-0x30ff]
    0.252927] pci 0000:05:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
    0.252949] pci 0000:05:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
    0.253043] pci 0000:05:00.0: supports D1 D2
    0.253044] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    0.254735] pci 0000:00:1c.1: PCI bridge to [bus 05]
    0.254745] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
    0.254764] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    0.254874] pci 0000:06:00.0: [10ec:5209] type 00 class 0xff0000
    0.254895] pci 0000:06:00.0: reg 10: [mem 0xc1500000-0xc1500fff]
    0.255054] pci 0000:06:00.0: supports D1 D2

    0.255055] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
    0.256731] pci 0000:00:1c.2: PCI bridge to [bus 06]
    0.256741] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
    0.256750] pci 0000:00:1c.2:   bridge window [mem 0xc1500000-0xc24fffff]
    0.256765] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
    0.256814] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 06
    0.256913] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    0.257101] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    0.257221] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:1c49]
    0.257224] PCI: pci_cache_line_size set to 64 bytes
    0.257319] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    0.257320] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
    0.257322] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    0.257323] e820: reserve RAM buffer [mem 0x1dfe00000-0x1dfffffff]
    0.257397] NetLabel: Initializing
    0.257398] NetLabel:  domain hash size = 128
    0.257399] NetLabel:  protocols = UNLABELED CIPSOv4
    0.257408] NetLabel:  unlabeled traffic allowed by default
    0.257431] Switching to clocksource refined-jiffies
    0.259097] AppArmor: AppArmor Filesystem Enabled
    0.259112] pnp: PnP ACPI: disabled
    0.260284] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    0.260324] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref]
    0.260326] pci 0000:00:01.0: PCI bridge to [bus 01]
    0.260328] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
    0.260331] pci 0000:00:01.0:   bridge window [mem 0xc2600000-0xc35fffff]
    0.260334] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    0.260337] pci 0000:00:01.1: PCI bridge to [bus 02]
    0.260342] pci 0000:00:01.2: PCI bridge to [bus 03]
    0.260348] pci 0000:00:1c.0: PCI bridge to [bus 04]
    0.260353] pci 0000:00:1c.0:   bridge window [mem 0xc2500000-0xc25fffff]
    0.260362] pci 0000:00:1c.1: PCI bridge to [bus 05]
    0.260365] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
    0.260372] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    0.260379] pci 0000:00:1c.2: PCI bridge to [bus 06]
    0.260382] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
    0.260387] pci 0000:00:1c.2:   bridge window [mem 0xc1500000-0xc24fffff]
    0.260391] pci 0000:00:1c.2:   bridge window [mem 0xc0500000-0xc14fffff 64bit pref]
    0.260407] pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
    0.260411] pci 0000:00:01.1: PCI->APIC IRQ transform: INT A -> IRQ 16
    0.260415] pci 0000:00:01.2: PCI->APIC IRQ transform: INT A -> IRQ 16
    0.260423] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
    0.260430] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
    0.260439] pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18
    0.260443] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    0.260444] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
    0.260446] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
    0.260448] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff]
    0.260450] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    0.260452] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff]
    0.260453] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
    0.260455] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
    0.260457] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
    0.260458] pci_bus 0000:06: resource 1 [mem 0xc1500000-0xc24fffff]
    0.260460] pci_bus 0000:06: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]
    0.260489] NET: Registered protocol family 2
    0.261055] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    0.262227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    0.262362] TCP: Hash tables configured (established 524288 bind 65536)
    0.262382] TCP: reno registered
    0.262392] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    0.262421] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    0.262500] NET: Registered protocol family 1
    0.262515] pci 0000:00:02.0: Boot video device
    0.262530] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
    0.273742] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
    0.284743] PCI: CLS 64 bytes, default 64
    0.284803] Unpacking initramfs...

    0.645547] Freeing initrd memory: 32684k freed
    0.649233] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    0.649238] software IO TLB [mem 0x98e3a000-0x9ce39fff] (64MB) mapped at [ffff880098e3a000-ffff88009ce39fff]
    0.649308] platform rtc_cmos: registered platform RTC device (no PNP device found)
    0.649571] audit: initializing netlink socket (disabled)
    0.649581] type=2000 audit(1382025109.547:1): initialized
    0.667644] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    0.667993] VFS: Disk quotas dquot_6.5.2
    0.668011] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    0.668124] msgmni has been set to 11853
    0.668247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    0.668264] io scheduler noop registered
    0.668265] io scheduler deadline registered
    0.668273] io scheduler cfq registered (default)
    0.668527] vesafb: mode is 1600x900x32, linelength=6400, pages=0
    0.668528] vesafb: scrolling: redraw
    0.668530] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    0.669038] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90001580000, using 5632k, total 5632k
    0.767250] Console: switching to colour frame buffer device 200x56
    0.865165] fb0: VESA VGA frame buffer device
    0.865174] intel_idle: MWAIT substates: 0x21120
    0.865175] intel_idle: v0.4 model 0x2A
    0.865176] intel_idle: lapic_timer_reliable_states 0xffffffff
    0.865213] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
    0.865956] Non-volatile memory driver v1.3
    0.865957] Linux agpgart interface v0.103
    0.866029] ahci 0000:00:1f.2: version 3.0
    0.866044] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
    0.866080] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    0.876275] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
    0.876285] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    0.876294] ahci 0000:00:1f.2: setting latency timer to 64
    0.878650] scsi0 : ahci
    0.878703] scsi1 : ahci
    0.878745] scsi2 : ahci
    0.878785] scsi3 : ahci
    0.878824] scsi4 : ahci
    0.878864] scsi5 : ahci
    0.878894] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 40
    0.878895] ata2: DUMMY
    0.878896] ata3: DUMMY
    0.878897] ata4: DUMMY
    0.878900] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 40
    0.878901] ata6: DUMMY
    0.878960] libphy: Fixed MDIO Bus: probed
    0.878962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    0.878979] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
    0.878993] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    0.878996] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    0.879002] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    0.879015] ehci_hcd 0000:00:1a.0: debug port 2
    0.882920] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    0.882930] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3609000
    0.888233] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    0.888288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    0.888294] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    0.888298] usb usb1: Product: EHCI Host Controller
    0.888303] usb usb1: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
    0.888308] usb usb1: SerialNumber: 0000:00:1a.0
    0.888407] hub 1-0:1.0: USB hub found
    0.888411] hub 1-0:1.0: 2 ports detected
    0.888465] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
    0.888477] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    0.888480] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    0.888483] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    0.888495] ehci_hcd 0000:00:1d.0: debug port 2
    0.892397] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    0.892406] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc3608000
    0.898215] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    0.898250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    0.898255] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    0.898260] usb usb2: Product: EHCI Host Controller
    0.898265] usb usb2: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
    0.898269] usb usb2: SerialNumber: 0000:00:1d.0
    0.898367] hub 2-0:1.0: USB hub found
    0.898370] hub 2-0:1.0: 2 ports detected
    0.898421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    0.898435] uhci_hcd: USB Universal Host Controller Interface driver
    0.898461] i8042: PNP: No PS/2 controller found. Probing ports directly.
    0.910607] serio: i8042 KBD port at 0x60,0x64 irq 1
    0.910614] serio: i8042 AUX port at 0x60,0x64 irq 12
    0.910687] mousedev: PS/2 mouse device common for all mice
    0.911831] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
    0.911856] rtc0: alarms up to one day, 114 bytes nvram
    0.911891] cpuidle: using governor ladder
    0.911930] cpuidle: using governor menu
    0.911933] ledtrig-cpu: registered to indicate activity on CPUs
    0.911934] EFI Variables Facility v0.08 2004-May-17

JohnDragonFly · October 17, 2013, 3:46pm

    0.912056] usbcore: registered new interface driver usbhid
    0.912057] usbhid: USB HID core driver
    0.912160] TCP: cubic registered
    0.912175] NET: Registered protocol family 10
    0.912303] lib80211: common routines for IEEE802.11 drivers
    0.912304] lib80211_crypt: registered algorithm 'NULL'
    0.912312] Key type dns_resolver registered
    0.912450] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD7500BPVT-60HXZT1_WD-WX91A6158784-part6
    0.923672] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    1.186701] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    1.187052] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    1.192038] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    1.193992] ata1.00: ATA-8: WDC WD7500BPVT-60HXZT1, 01.01A01, max UDMA/133
    1.193994] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    1.199018] ata5.00: ATAPI: hp      DVD-RAM UJ8B1, H.02, max UDMA/100
    1.201068] ata1.00: configured for UDMA/133
    1.201144] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-6 01.0 PQ: 0 ANSI: 5
    1.201228] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    1.201230] sd 0:0:0:0: [sda] 4096-byte physical blocks
    1.201276] sd 0:0:0:0: [sda] Write Protect is off
    1.201278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    1.201295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    1.212369] ata5.00: configured for UDMA/100
    1.214734] scsi 4:0:0:0: CD-ROM            hp       DVD-RAM UJ8B1    H.02 PQ: 0 ANSI: 5
    1.300256]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    1.300505] sd 0:0:0:0: [sda] Attached SCSI disk
    1.300509] PM: Hibernation image not present or could not be loaded.
    1.300522] registered taskstats version 1
    1.300996]   Magic number: 1:233:892
    1.301018] bdi default: hash matches
    1.301050] rtc_cmos rtc_cmos: setting system clock to 2013-10-17 15:51:50 UTC (1382025110)
    1.302231] Freeing unused kernel memory: 992k freed
    1.302342] Write protecting the kernel read-only data: 10240k
    1.303181] Freeing unused kernel memory: 364k freed
    1.303457] Freeing unused kernel memory: 108k freed
    1.305837] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    1.305839] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    1.305977] hub 1-1:1.0: USB hub found
    1.306085] hub 1-1:1.0: 6 ports detected
    1.331062] hp_sw: device handler registered
    1.332108] alua: device handler registered
    1.333140] emc: device handler registered
    1.334163] rdac: device handler registered
    1.337762] systemd-udevd[106]: starting version 195
    1.352498] [drm] Initialized drm 1.1.0 20060810
    1.355576] [drm] radeon defaulting to kernel modesetting.
    1.355579] [drm] radeon kernel modesetting enabled.
    1.355612] checking generic (b0000000 580000) vs hw (a0000000 10000000)
    1.355621] radeon 0000:01:00.0: enabling device (0000 -> 0003)
    1.355629] radeon 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
    1.355751] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1672).
    1.355774] [drm] register mmio base: 0xC2600000
    1.355776] [drm] register mmio size: 131072
    1.356176] radeon 0000:01:00.0: Invalid ROM contents
    1.356729] radeon 0000:01:00.0: Invalid ROM contents
    1.357421] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
    1.358379] radeon 0000:01:00.0: Fatal error during GPU init
    1.358957] [drm] radeon: finishing device.
    1.358959] [TTM] Memory type 2 has not been initialized
    1.361218] radeon: probe of 0000:01:00.0 failed with error -22
    1.408654] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    1.651218] Switching to clocksource tsc
    1.876317] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1678, fw id: 706628
    1.927775] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
   16.921974] usb 2-1: device not accepting address 2, error -110
   17.023795] usb 2-1: new high-speed USB device number 3 using ehci_hcd
   32.537121] usb 2-1: device not accepting address 3, error -110
   32.638590] usb 2-1: new high-speed USB device number 4 using ehci_hcd
   35.006806] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
   35.006810] PM: Marking nosave pages: [mem 0x9ce3f000-0x9cffefff]
   35.006818] PM: Marking nosave pages: [mem 0x9d000000-0xffffffff]
   35.007799] PM: Basic memory bitmaps created
   35.026914] PM: Basic memory bitmaps freed
   35.042322] PM: Starting manual resume from disk
   35.042326] PM: Hibernation image partition 8:6 present
   35.042328] PM: Looking for hibernation image.
   35.042585] PM: Image not found (code -22)
   35.042588] PM: Hibernation image not present or could not be loaded.
   35.450310] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
   35.763947] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr
   36.579217] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
   36.649306] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
   37.079205] systemd[1]: Inserted module 'autofs4'
   37.089662] systemd[1]: Set hostname to <linux-jyz5.site>.
   38.683544] systemd[1]: Starting Replay Read-Ahead Data...
   38.686932] systemd[1]: Starting Collect Read-Ahead Data...
   38.688917] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
   38.688999] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
   38.689016] systemd[1]: Starting Syslog Socket.
   38.689081] systemd[1]: Listening on Syslog Socket.
   38.689093] systemd[1]: Starting System Time Synchronized.
   38.689126] systemd[1]: Reached target System Time Synchronized.
   38.689139] systemd[1]: Starting Remote File Systems.
   38.689171] systemd[1]: Reached target Remote File Systems.
   38.689183] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
   38.689227] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
   38.689237] systemd[1]: Starting Delayed Shutdown Socket.
   38.689285] systemd[1]: Listening on Delayed Shutdown Socket.
   38.689310] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
   38.689413] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
   38.689427] systemd[1]: Starting Encrypted Volumes.
   38.689460] systemd[1]: Reached target Encrypted Volumes.
   38.689516] systemd[1]: Starting udev Kernel Socket.
   38.689564] systemd[1]: Listening on udev Kernel Socket.
   38.689608] systemd[1]: Starting udev Control Socket.
   38.689660] systemd[1]: Listening on udev Control Socket.
   38.689673] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d60HXZT1_WD\x2dWX91A6158784\x2dpart6.device...
   38.689706] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dWDC_WD7500BPVT\x2d60HXZT1_WD\x2dWX91A6158784\x2dpart8.device...
   38.689741] systemd[1]: Starting Journal Socket.
   38.689805] systemd[1]: Listening on Journal Socket.
   38.689819] systemd[1]: Starting LSB: Set default boot entry if called...
   38.692890] systemd[1]: Mounting POSIX Message Queue File System...
   38.694876] systemd[1]: Mounting Huge Pages File System...
   38.696867] systemd[1]: Starting Create dynamic rule for /dev/root link...
   38.701198] systemd[1]: Starting Journal Service...
   38.705536] systemd[1]: Started Journal Service.
   38.803165] systemd-readahead[244]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
   40.478840] systemd-udevd[270]: starting version 195
   40.482841] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr
   40.841220] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
   40.841223] EDD information not available.
   41.961075] ACPI Exception: AE_BAD_PARAMETER, Thread 3525879360 could not acquire Mutex [0x1] (20120913/utmutex-276)
   41.961084] ACPI Exception: AE_BAD_PARAMETER, Thread 3525879360 could not acquire Mutex [0x1] (20120913/utmutex-276)
   41.961087] ACPI Exception: AE_BAD_PARAMETER, Thread 3525879360 could not acquire Mutex [0x1] (20120913/utmutex-276)
   41.961089] ACPI Exception: AE_BAD_PARAMETER, Thread 3525879360 could not acquire Mutex [0x1] (20120913/utmutex-276)
   41.961599] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
   41.962780] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
   41.964322] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
   41.964383] bcma-pci-bridge 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
   41.964394] r8169 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
   41.964412] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
   41.964442] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
   41.964467] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
   41.964516] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
   41.964650] r8169 0000:05:00.0: irq 41 for MSI/MSI-X
   41.964806] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc9000157a000, 10:1f:74:c5:b7:65, XID 00a00000 IRQ 41
   41.965818] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
   41.966224] rts_pstor: Initializing Realtek PCIE storage driver...
   41.966250] rts_pstor 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
   41.966748] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16
   41.966753] mei 0000:00:16.0: setting latency timer to 64
   41.966802] mei 0000:00:16.0: irq 42 for MSI/MSI-X
   41.966874] rts_pstor 0000:06:00.0: Resource length: 0x1000
   41.966881] rts_pstor 0000:06:00.0: Original address: 0xc1500000, remapped address: 0xffffc9000157e000
   41.966886] rts_pstor 0000:06:00.0: pci->irq = 18
   41.966888] rts_pstor 0000:06:00.0: rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
   41.972010] sd 0:0:0:0: Attached scsi generic sg0 type 0
   41.972038] sr 4:0:0:0: Attached scsi generic sg1 type 5
   41.974421] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 19
   41.974426] ACPI Exception: AE_BAD_PARAMETER, Thread 3522871616 could not acquire Mutex [0x1] (20120913/utmutex-276)
   41.974454] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
   41.975955] input: PC Speaker as /devices/platform/pcspkr/input/input2
   41.977098] mei 0000:00:16.0: wd: failed to find the client
   41.982249] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
   41.982253] cdrom: Uniform CD-ROM driver Revision: 3.20
   41.982371] sr 4:0:0:0: Attached scsi CD-ROM sr0
   41.994205] bcma: bus0: Bus registered
   41.999695] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
   42.028007] iTCO_vendor_support: vendor-support=0
   42.028188] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
   42.028220] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
   42.028291] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
   42.028684] gpio_ich: GPIO from 180 to 255 on gpio_ich
   42.054372] cfg80211: Calling CRDA to update world regulatory domain
   42.057899] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
   42.058811] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8 (LCN), Revision 1)
   42.058818] b43: probe of bcma0:0 failed with error -95
   42.058834] Broadcom 43xx driver loaded  Features: PMNLS ]
   42.060158] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
   42.166754] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
   42.166819] rts_pstor 0000:06:00.0: rts_pstor: waiting for device to settle before scanning
   42.340104] cfg80211: World regulatory domain updated:
   42.340107] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   42.340109] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   42.340111] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   42.340112] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   42.340113] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   42.340115] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   42.407642] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
   42.407763] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
   42.408102] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
   42.408105] perf_event_intel: PEBS enabled due to microcode update
   42.408212] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
   42.479696] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
   42.526107] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
   42.526156] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
   42.898987] ALSA patch_sigmatel.c:5663 mute LED gpio 1 polarity 0
   42.898993] ALSA hda_auto_parser.c:318 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
   42.898995] ALSA hda_auto_parser.c:322    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   42.898996] ALSA hda_auto_parser.c:326    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
   42.898998] ALSA hda_auto_parser.c:327    mono: mono_out=0x0
   42.898999] ALSA hda_auto_parser.c:331    inputs:
   42.899001] ALSA hda_auto_parser.c:335      Mic=0xc
   42.899194] ALSA patch_sigmatel.c:3145 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
   42.899416] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
   42.911255] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
   42.911373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
   42.911457] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
   43.046021] usb 2-1: device not accepting address 4, error -110
   43.147847] usb 2-1: new high-speed USB device number 5 using ehci_hcd
   43.164904] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
   43.165040] sd 6:0:0:0: Attached scsi generic sg2 type 0
   43.165073] rts_pstor 0000:06:00.0: rts_pstor: device scan complete
   43.165124] sd 6:0:0:0: [sdb] Attached SCSI removable disk
   45.702177] Adding 5125116k swap on /dev/sda6.  Priority:-1 extents:1 across:5125116k
   46.967529] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
   46.980813] systemd-journald[250]: Received SIGUSR1

JohnDragonFly · October 17, 2013, 3:58pm

   47.283010] type=1400 audit(1382014356.547:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=478 comm="apparmor_parser"
   47.291118] type=1400 audit(1382014356.555:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=486 comm="apparmor_parser"
   47.296419] type=1400 audit(1382014356.560:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=490 comm="apparmor_parser"
   47.301848] type=1400 audit(1382014356.566:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=494 comm="apparmor_parser"
   47.310045] type=1400 audit(1382014356.574:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=499 comm="apparmor_parser"
   47.310327] type=1400 audit(1382014356.574:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=499 comm="apparmor_parser"
   47.310592] type=1400 audit(1382014356.575:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=499 comm="apparmor_parser"
   47.310903] type=1400 audit(1382014356.575:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=499 comm="apparmor_parser"
   47.316423] type=1400 audit(1382014356.581:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=503 comm="apparmor_parser"
   47.321964] type=1400 audit(1382014356.586:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=507 comm="apparmor_parser"
   53.555273] usb 2-1: device not accepting address 5, error -110
   53.555290] hub 2-0:1.0: unable to enumerate USB device on port 1
   53.969128] audit_printk_skb: 63 callbacks suppressed
   53.969132] type=1400 audit(1382014363.243:33): apparmor="DENIED" operation="mknod" parent=1 profile="/usr/sbin/nscd" name="/var/run/nscd/netgroup" pid=634 comm="nscd" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
   53.972938] type=1400 audit(1382014363.247:34): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/nscd" pid=634 comm="nscd" pid=634 comm="nscd" capability=36  capname="block_suspend"
   53.972996] type=1400 audit(1382014363.247:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/nscd" pid=634 comm="nscd" pid=634 comm="nscd" capability=36  capname="block_suspend"
   54.063120] ip6_tables: (C) 2000-2006 Netfilter Core Team
   54.071186] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
   54.073604] ip_tables: (C) 2000-2006 Netfilter Core Team
   54.134551] Bluetooth: Core ver 2.16
   54.134566] NET: Registered protocol family 31
   54.134568] Bluetooth: HCI device and connection manager initialized
   54.134575] Bluetooth: HCI socket layer initialized
   54.134577] Bluetooth: L2CAP socket layer initialized
   54.134583] Bluetooth: SCO socket layer initialized
   54.136755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
   54.136758] Bluetooth: BNEP filters: protocol multicast
   54.136765] Bluetooth: BNEP socket layer initialized
   54.143504] ieee80211 phy1: brcms_ops_start: brcms_up() returned -132
   54.410801] r8169 0000:05:00.0 eth0: link down
   54.410856] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
   54.418619] NET: Registered protocol family 17
   62.088246] type=1400 audit(1382014371.375:36): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=931 comm="kdm"
   86.921802] type=1400 audit(1382014396.246:37): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/nscd" name="/proc/sys/vm/overcommit_memory" pid=644 comm="nscd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  104.400663] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
  104.489156] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
  104.489159] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  104.489161] usb 1-1.1: Product:  USB OPTICAL MOUSE
  104.491670] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7
  104.491782] hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse  USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
  491.858765] type=1400 audit(1382014801.787:38): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=1330 comm="cron"
  535.821942] r8169 0000:05:00.0 eth0: link up
  535.821950] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  536.603870] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  537.383247] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=218
  537.409181] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
  537.448074] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
  537.662096] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
  537.914619] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=390
  555.889478] fuse init (API version 7.20)
  568.423864] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
  600.407136] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
  664.373697] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
  792.283619] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
  831.248491] type=1400 audit(1382015141.683:39): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=2562 comm="su"
 1032.793683] type=1400 audit(1382015343.529:40): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=2732 comm="su"
 1047.917568] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:121f:74ff:fec5:b765 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core  Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6400M/7400M Series]
04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
06:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
lsmod
Module                  Size  Used by
fuse                   87139  3
xt_tcpudp              12885  2
xt_pkttype             12505  3
af_packet              39587  4
xt_LOG                 17522  10
xt_limit               12712  10
ip6t_REJECT            12940  3
nf_conntrack_ipv6      14684  3
nf_defrag_ipv6         18262  1 nf_conntrack_ipv6
ip6table_raw           12684  1
bnep                   19702  2
bluetooth             341895  7 bnep
ipt_REJECT             12542  3
iptable_raw            12679  1
xt_CT                  12869  4
iptable_filter         12811  1
ip6table_mangle        12701  0
nf_conntrack_netbios_ns    12666  0
nf_conntrack_broadcast    12590  1 nf_conntrack_netbios_ns
nf_conntrack_ipv4      15013  3
nf_defrag_ipv4         12730  1 nf_conntrack_ipv4
ip_tables              27240  2 iptable_raw,iptable_filter
xt_conntrack           12761  6
nf_conntrack           98519  6  nf_conntrack_ipv6,xt_CT,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ipv4,xt_conntrack
ip6table_filter        12816  1
ip6_tables             27208  3 ip6table_raw,ip6table_mangle,ip6table_filter
x_tables               34060  15  xt_tcpudp,xt_pkttype,xt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,ipt_REJECT,iptable_raw,xt_CT,iptable_filter,ip6table_mangle,ip_tables,xt_conntrack,ip6table_filter,ip6_tables
snd_hda_codec_hdmi     40844  1
snd_hda_codec_idt      74313  1
snd_hda_intel          42034  3
snd_hda_codec         147417  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13603  1 snd_hda_codec
arc4                   12616  2
snd_pcm               110154  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
acpi_cpufreq           19572  0
processor              44950  1 acpi_cpufreq
mperf                  12668  1 acpi_cpufreq
coretemp               13394  0
kvm_intel             136915  0
kvm                   475491  1 kvm_intel
crc32c_intel           12902  0
ghash_clmulni_intel    13260  0
aesni_intel            55441  0
ablk_helper            13598  1 aesni_intel
cryptd                 16307  3 ghash_clmulni_intel,aesni_intel,ablk_helper
lrw                    13287  1 aesni_intel
aes_x86_64             17256  1 aesni_intel
xts                    12915  1 aesni_intel
gf128mul               14952  2 lrw,xts
snd_seq                69780  0
snd_timer              29371  2 snd_pcm,snd_seq
snd_seq_device         14498  1 snd_seq
snd                    91489  15  snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              15048  1 snd
snd_page_alloc         18711  2 snd_hda_intel,snd_pcm
brcmsmac              548950  0
brcmutil               14756  1 brcmsmac
cordic                 12575  1 brcmsmac
b43                   395893  0
mac80211              598150  2 brcmsmac,b43
cfg80211              218484  3 brcmsmac,b43,mac80211
rfkill                 26530  4 bluetooth,cfg80211
ssb                    66991  1 b43
mmc_core              119332  2 b43,ssb
pcmcia                 65900  2 b43,ssb
pcmcia_core            27630  1 pcmcia
gpio_ich               13477  0
iTCO_wdt               13481  0
iTCO_vendor_support    13719  1 iTCO_wdt
microcode              35785  0
joydev                 17378  0
pcspkr                 12719  0
serio_raw              13376  0
i2c_i801               22440  0
sg                     36525  0
sr_mod                 22296  0
cdrom                  46688  1 sr_mod
mei                    79557  0
rts_pstor             446092  0
r8169                  67643  0
bcma                   44635  2 brcmsmac,b43
shpchp                 37033  0
pci_hotplug            35160  1 shpchp
lpc_ich                17062  0
mfd_core               13436  1 lpc_ich
autofs4                42771  2
radeon                948614  0
ttm                    91975  1 radeon
drm_kms_helper         50840  1 radeon
drm                   293115  3 radeon,ttm,drm_kms_helper
i2c_algo_bit           13414  1 radeon
video                  19401  0
thermal_sys            24957  2 processor,video
scsi_dh_rdac           17409  0
scsi_dh_emc            17259  0
scsi_dh_alua           17162  0
scsi_dh_hp_sw          12895  0
scsi_dh                14844  4 scsi_dh_rdac,scsi_dh_emc,scsi_dh_alua,scsi_dh_hp_sw
uname -a
Linux linux-jyz5.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linu

robin_listas · October 17, 2013, 7:13pm

On 2013-10-17 15:46, JohnDragonFly wrote:
>
> Hello ‘Lews’
> (https://forums.opensuse.org/members/lewstherintelemon.html) I’ve run
> the codes you supported me and her r the responses

Suggestion: to post large chunks of text like that, upload or paste at
susepaste.org.

–
Cheers / Saludos,

Carlos E. R.
(from 12.3 x86_64 “Dartmouth” at Telcontar)

JohnDragonFly · October 20, 2013, 6:27am

o.k I pasted on suspaste.org
SUSE Paste
hope you can help

knurpht · October 20, 2013, 12:50pm

That’s far too much to read. Question first: is Legacy USB enabled in the BIOS?

JohnDragonFly · October 20, 2013, 1:54pm

Dear Mr.Knurpht
about your question is Legacy USB enabled in the BIOS?
I don’t that as I said I’m newbie in the openSUSE if you can tell me how to check about that to enable it in case it was not enabled, I’ll be grateful
though I do have a windows7 side by side in same laptop and the USB ports all works just fine

thanks for you and for any one can help who’s reading these lines

robin_listas · October 20, 2013, 2:13pm

On 2013-10-20 13:56, JohnDragonFly wrote:
>
> Dear Mr.Knurpht
> about your question is Legacy USB enabled in the BIOS?
> I don’t that as I said I’m newbie in the openSUSE if you can tell me how
> to check about that to enable it in case it was not enabled, I’ll be
> grateful
> though I do have a windows7 side by side in same laptop and the USB
> ports all works just fine

The bios is neither linux nor windows. It is accessed before booting any
system by pressing certain key, which usually a text line says which key
it is. Just navigate the bios screens and find out if there is a setting
that says something like legacy usb.

–
Cheers / Saludos,

Carlos E. R.
(from 12.3 x86_64 “Dartmouth” at Telcontar)

Buddlespit · October 20, 2013, 2:52pm

When your system boots up, you get a splash screen or text telling you about your system, and usually it’s accompanied by a beep. On your notebook, when you hear the beep, you should be able to press ‘F10’ to enter your bios setup. A quick (google) glance at your bios tells me that you may not be able to adjust your USB settings to either enable or disable USB legacy options.

On the flip side of this, I’ve also started having USB loading issues with my keyboard and mouse on boot. But it eventually clears up and my system boots properly. I can see where this would be an issue if someone encrypts their /home.

knurpht · October 20, 2013, 3:07pm

well, this depends on the BIOS brand. Other options are Esc, F2, Del.

JohnDragonFly · October 21, 2013, 6:56am

Hello all
I did the bios check and there was no usb legacy options or any usb options at all I do realy think the problem is with the openSUSE itself because I’m not having this issue with my windows 7 which I mentioned earlier
I think there is some missing software that might recognize the usb ports 1,2
by the way the third usb port is already recognized and works well with my openSUSE12.3 the only problem is with the usb ports 1,2
another thing I noticed yesterday with my windows 7, I inserted a external HDD in to usb port 1 and in some point I needed to copy some files from the extrnal HDD to a thumb drive so I inserted a thumb drive in to usb port 2
and then suddenly the external HDD vanished from the sight it was like safely removed and reconnected again in a blink with the 2 drives there the EXT HDD and the thumb drive which make me thing that the 2 usb ports are connected together unlike the usb port 3 which is separate from them

rafaelcastellar · November 4, 2013, 2:50pm

Hi everyone!

I’m facing the same problem. I’ve just bought an Acer Aspire v5 laptop, which comes with 3 usb ports (1 3.0, 2 2.0). But in OpenSude 12.3 just one of the 2.0 works (or recognize whatever I plug into them). The other ones don’t recognize anything.

I have a dual boot installation. In Windows 7 all of them works properly.

I also need help here…

Tks and rgds!

Rafael

lwfinger · November 4, 2013, 6:27pm

On 11/04/2013 09:54 AM, rafaelcastellar wrote:
>
> Hi everyone!
>
> I’m facing the same problem. I’ve just bought an Acer Aspire v5 laptop,
> which comes with 3 usb ports (1 3.0, 2 2.0). But in OpenSude 12.3 just
> one of the 2.0 works (or recognize whatever I plug into them). The other
> ones don’t recognize anything.
>
> I have a dual boot installation. In Windows 7 all of them works
> properly.
>
> I also need help here…

The standard kernel for 12.3 (version 3.7.x) is too old to support USB 3.0. When
openSUSE 13.1 is released in 2 weeks, its kernel (3.11.x) should be better. Your
other option would be to add the repo for newer kernels. I don’t know the exact
steps as I build my own, but someone here should be able to help you.

rafaelcastellar · November 6, 2013, 12:52am

Thanks lwfinger!!

I’m waiting for this new version…Maybe I’ll try some kernel “update” as I will do a brand new installation (not upgrade).

If I do something like that, I’ll let you know…

Tks and regards

rafaelcastellar · November 6, 2013, 1:23am

You were right! I upgrade my kernel and now all of my USB ports are working properly!

I followed this article: https://forums.opensuse.org/blogs/jdmcdaniel3/opensuse-installing-new-linux-kernel-versions-134/

Best rgds…tks!