Results 1 to 9 of 9

Thread: cdrecord has no permission

  1. #1

    Default cdrecord has no permission

    While trying to use K3B I keep getting an error at the beginning of the write process.
    I have 11.3 X86-64 installed

    I have 2 writers installed on my machine k3b identifies the 2 in Device medium info but will not let me select one over the other when setting burn process.
    Then comes the error;
    "cdrecord has no permission to open the device".

    If I insert a disc into either or both burners they both show up in "last plugged device"

  2. #2

    Default Re: cdrecord has no permission

    I really could use some help with this, I have used these writers to burn both video and audio discs before but now all i get is this error..
    Devices
    -----------------------
    ATAPI iHAP322 9 6L1H (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
    HL-DT-ST DVD-RAM GSA-H22N 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

    System
    -----------------------
    K3b Version: 2.0.1
    KDE Version: 4.4.4 (KDE 4.4.4) "release 3"
    QT Version: 4.6.3
    Kernel: 2.6.34.7-0.5-desktop

    Used versions
    -----------------------
    cdrecord: 1.1.9

    cdrecord
    -----------------------
    /usr/bin/X11/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.9
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 0 = CD-DA
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'HL-DT-ST'
    Identification : 'DVD-RAM GSA-H22N'
    Revision : '1.00'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0009 (CD-R)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R) (current)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1114112 = 1088 KB
    Drive DMA Speed: 83781 kB/s 476x CD 60x DVD
    FIFO size : 4194304 = 4096 KB
    Speed set to 8468 KB/s
    pregap1: -1
    Track 01: audio 45 MB (04:33.20) no preemp swab copy
    Track 02: audio 42 MB (04:12.56) no preemp swab copy
    Track 03: audio 45 MB (04:31.89) no preemp swab copy
    Track 04: audio 43 MB (04:20.00) no preemp swab copy
    Track 05: audio 40 MB (04:01.77) no preemp swab copy
    Track 06: audio 43 MB (04:17.24) no preemp swab copy
    Track 07: audio 39 MB (03:54.42) no preemp swab copy
    Track 08: audio 43 MB (04:20.81) no preemp swab copy
    Track 09: audio 36 MB (03:36.12) no preemp swab copy
    Track 10: audio 37 MB (03:44.81) no preemp swab copy
    Track 11: audio 34 MB (03:23.21) no preemp swab copy
    Track 12: audio 38 MB (03:51.32) no preemp swab copy
    Track 13: audio 40 MB (04:01.80) no preemp swab copy
    Track 14: audio 43 MB (04:21.54) no preemp swab copy
    Track 15: audio 36 MB (03:35.04) no preemp swab copy
    Track 16: audio 36 MB (03:34.60) no preemp swab copy
    Track 17: audio 45 MB (04:32.88) no preemp swab copy
    Track 18: audio 32 MB (03:13.70) no preemp swab copy
    Track 19: audio 42 MB (04:14.70) no preemp swab copy
    Track 20: audio 30 MB (02:59.81) no preemp swab copy
    Total size: 801 MB (79:21.46) = 357110 sectors
    Lout start: 801 MB (79:23/35) = 357110 sectors
    Current Secsize: 2048
    ATIP info from disk:
    Indicated writing power: 5
    Is not unrestricted
    Is not erasable
    Disk sub type: Medium Type B, low Beta category (B-) (4)
    ATIP start of lead in: -12369 (97:17/06)
    ATIP start of lead out: 359849 (79:59/74)
    Disk type: Short strategy type (Phthalocyanine or similar)
    Manuf. index: 69
    Manufacturer: Moser Baer India Limited
    Manufacturer is guessed because of the orange forum embargo.
    The orange forum likes to get money for recent information.
    The information for this media may not be correct.
    Blocks total: 359849 Blocks current: 359522 Blocks remaining: 2412
    Starting to write CD/DVD at speed 48.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
    1 seconds.
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Sending CUE sheet...
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 01 47 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 24 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.002s timeout 200s
    Writing pregap for track 1 at 327
    write track pad data: error after 0 bytes
    BFree: 1088 K BSize: 1088 K
    Starting new track at sector: 477
    Track 01: 0 of 45 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 01 DD 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 24 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.002s timeout 200s
    /usr/bin/X11/wodim: A write error occured.
    /usr/bin/X11/wodim: Please properly read the error message above.
    write track data: error after 0 bytes
    Writing time: 5.042s
    Average write speed 950.3x.
    Fixating...
    Fixating time: 0.002s
    /usr/bin/X11/wodim: fifo had 64 puts and 1 gets.
    /usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

    cdrecord command:
    -----------------------
    /usr/bin/X11/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao driveropts=burnfree -useinfo -audio /tmp/kde-ian/k3b_audio_0_01.inf /tmp/kde-ian/k3b_audio_0_02.inf /tmp/kde-ian/k3b_audio_0_03.inf /tmp/kde-ian/k3b_audio_0_04.inf /tmp/kde-ian/k3b_audio_0_05.inf /tmp/kde-ian/k3b_audio_0_06.inf /tmp/kde-ian/k3b_audio_0_07.inf /tmp/kde-ian/k3b_audio_0_08.inf /tmp/kde-ian/k3b_audio_0_09.inf /tmp/kde-ian/k3b_audio_0_10.inf /tmp/kde-ian/k3b_audio_0_11.inf /tmp/kde-ian/k3b_audio_0_12.inf /tmp/kde-ian/k3b_audio_0_13.inf /tmp/kde-ian/k3b_audio_0_14.inf /tmp/kde-ian/k3b_audio_0_15.inf /tmp/kde-ian/k3b_audio_0_16.inf /tmp/kde-ian/k3b_audio_0_17.inf /tmp/kde-ian/k3b_audio_0_18.inf /tmp/kde-ian/k3b_audio_0_19.inf /tmp/kde-ian/k3b_audio_0_20.inf

  3. #3
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,100
    Blog Entries
    16

    Default Re: cdrecord has no permission

    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  4. #4
    Join Date
    Jun 2008
    Location
    Earth - Denmark
    Posts
    11,210

    Default Re: cdrecord has no permission

    caf4926 wrote:
    > Try switching it to Packman
    > http://tinyurl.com/2askrz5


    and if that doesn't work, why not

    1. log a bug, see http://en.opensuse.org/Submitting_Bug_Reports, and

    2. unplug one of the burners and see if that solves the problem, or

    3. if both burners on the same data cable and therefore to the same
    motherboard attachment point, is one of them set to master and the
    other slave? or,

    4. try putting only one burner on each motherboard attach point..

    now, please do not come back and say that both writers are USB, or one
    is USB and the other is not....because all of that has a bearing on
    this case and you should have included all relevant info in your
    initial post...by the way, is this a laptop or a rack mounted eight
    core server ;-)

    --
    DenverD
    CAVEAT: http://is.gd/bpoMD [posted via NNTP w/openSUSE 10.3]

  5. #5

    Default Re: cdrecord has no permission

    I have the packman version installed.. I have successfully burnt many discs in the past, this has just started happening.
    I will submit a bug..........

  6. #6

    Default Re: cdrecord has no permission

    Quote Originally Posted by DenverD View Post
    caf4926 wrote:
    > Try switching it to Packman
    > http://tinyurl.com/2askrz5


    and if that doesn't work, why not

    1. log a bug, see openSUSE:Submitting bug reports - openSUSE, and

    2. unplug one of the burners and see if that solves the problem, or

    3. if both burners on the same data cable and therefore to the same
    motherboard attachment point, is one of them set to master and the
    other slave? or,

    4. try putting only one burner on each motherboard attach point..

    now, please do not come back and say that both writers are USB, or one
    is USB and the other is not....because all of that has a bearing on
    this case and you should have included all relevant info in your
    initial post...by the way, is this a laptop or a rack mounted eight
    core server ;-)

    --
    DenverD
    CAVEAT: C A V E A T [posted via NNTP w/openSUSE 10.3]
    I retried the options in your post with no joy.. I posted a bug which was closed straight away as I am using the packman version of k3b.
    Next step; i again tried the your options with no luck. I then on the off chance tried a different make of cd and all is good. It seems the kodak brand cds are not compatible with k3b.

  7. #7

    Default Re: cdrecord has no permission [SOLVED]

    Quote Originally Posted by DenverD View Post
    caf4926 wrote:
    > Try switching it to Packman
    > http://tinyurl.com/2askrz5


    and if that doesn't work, why not

    1. log a bug, see openSUSE:Submitting bug reports - openSUSE, and

    2. unplug one of the burners and see if that solves the problem, or

    3. if both burners on the same data cable and therefore to the same
    motherboard attachment point, is one of them set to master and the
    other slave? or,

    4. try putting only one burner on each motherboard attach point..

    now, please do not come back and say that both writers are USB, or one
    is USB and the other is not....because all of that has a bearing on
    this case and you should have included all relevant info in your
    initial post...by the way, is this a laptop or a rack mounted eight
    core server ;-)

    --
    DenverD
    CAVEAT: C A V E A T [posted via NNTP w/openSUSE 10.3]
    I retried the options in your post with no joy.. I posted a bug which was closed straight away as I am using the packman version of k3b.
    Next step; i again tried the your options with no luck. I then on the off chance tried a different make of cd and all is good. It seems the kodak brand cds are not compatible with k3b.

  8. #8
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    37,100
    Blog Entries
    16

    Default Re: cdrecord has no permission [SOLVED]

    Are there any differences in the Kodak and new brand
    Eg: CD-R or CD+R are they both 52x
    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  9. #9
    Join Date
    Jun 2008
    Location
    Berlin
    Posts
    2,108

    Default Re: cdrecord has no permission [SOLVED]

    Some CDs / DVDs have trouble working properly with certain burning devices. You should test different brands and avoid the ones who fail to cooperate. However, this has nothing to do with K3B or its backends.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •