Results 1 to 9 of 9

Thread: HPLaserJet P1005 and HPLIP not work in 11.2

  1. #1
    Join Date
    Mar 2009
    Location
    Burgas,Bulgaria
    Posts
    80

    Default HPLaserJet P1005 and HPLIP not work in 11.2

    Hi,everyone!
    I have this HP Laser Jet P1005 and it working wonderful in 11.1 whit HPLIP .But now i switch on printer before installing 11.2 (lake every time before installing) and lucks like everything is OK,printer was recognized but not printing(Devise communication error5012)
    hеre is a log of - "hp-check -t"
    Code:
    HP Linux Imaging and Printing System (ver. 3.9.8)
    Dependency/Version Check Utility ver. 14.3       
    
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.            
    This is free software, and you are welcome to distribute it 
    under certain conditions. See COPYING file for more details.
    
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP        
    supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to   
    successfully compile HPLIP.                                                                   
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package 
    (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies      
    installed to successfully run.                                                                
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both  
    of the above cases (both compile- and run-time dependencies).                                 
    
    Saving output in log file: hp-check.log
    
    Initializing. Please wait...
    \/usr/lib/python2.6/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display                                                                                            
      warnings.warn(str(e), _gtk.Warning)                                                         
     
    ---------------
    | SYSTEM INFO |
    ---------------
    
    Basic system information:
    Linux linux-pule 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 i686 i686 i386 GNU/Linux                                                                                     
    
    Distribution:
    suse 11.2    
    
    Checking Python version...
    OK, version 2.6.2 installed
    
    Checking PyQt 4.x version...
    OK, version 4.6.1 installed.
    
    Checking for CUPS...
    Status: scheduler is running
    Version: 1.3.11
    error_log is set to level: info
    
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.83.0
    
    
    ------------------------------------
    | COMPILE AND RUNTIME DEPENDENCIES |
    ------------------------------------
    
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).                                                                                 
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).                                                                                     
    
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.                                                    
    
    Checking for dependency: CUPS DDK - CUPS driver development kit...
    OK, found.                                                        
    
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.                                                                           
    
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.                                                           
    
    Checking for dependency: DBus - Message bus system...
    OK, found.                                           
    
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.                                                      
    
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...                                                                                             
    OK, found.                                                                                    
    
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.                                                           
    
    Checking for dependency: libjpeg - JPEG library...
    OK, found.                                        
    
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.                                                                              
    
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.                                                    
    
    Checking for dependency: libtool - Library building support services...
    OK, found.                                                             
    
    Checking for dependency: libusb - USB library...
    OK, found.                                      
    
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.                                                                        
    
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...                                                                                   
    OK, found.                                                                                    
    
    Checking for dependency: PolicyKit - Administrative policy framework...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.                                                                        
    
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.                                                      
    
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.                                                        
    
    Checking for dependency: Python devel - Python development files...
    OK, found.                                                         
    
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...                                                                                      
    OK, found.                                                                                    
    
    Checking for dependency: Python XML libraries...
    OK, found.                                      
    
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.                                                                        
    
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.                                                                     
    
    Checking for dependency: Reportlab - PDF library for Python...
    warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.                                                                        
    
    Checking for dependency: SANE - Scanning library...
    OK, found.                                         
    
    Checking for dependency: SANE - Scanning library development files...
    OK, found.                                                           
    
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.                                                    
    
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    OK, found.                                                             
    
    
    ----------------------
    | HPLIP INSTALLATION |
    ----------------------
    
    
    Currently installed HPLIP version...
    HPLIP 3.9.8 currently installed in '/usr/share/hplip'.
    
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf.  Generated from hplip.conf.in by configure.
    
    [hplip]
    version=3.9.8
    
    [dirs]
    home=/usr/share/hplip
    run=/var/run         
    ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
    ppdbase=/usr/share/cups/model/manufacturer-PPDs  
    doc=/usr/share/doc/packages/hplip                
    icon=/usr/share/applications                     
    cupsbackend=/usr/lib/cups/backend                
    cupsfilter=/usr/lib/cups/filter                  
    drv=/usr/lib/cups/driver                         
    
    # Following values are determined at configure time and cannot be changed.
    [configure]                                                               
    network-build=yes                                                         
    pp-build=yes                                                              
    gui-build=yes                                                             
    scanner-build=yes                                                         
    fax-build=yes                                                             
    dbus-build=yes                                                            
    cups11-build=no                                                           
    doc-build=yes                                                             
    shadow-build=no                                                           
    hpijs-install=yes                                                         
    foomatic-drv-install=no                                                   
    foomatic-ppd-install=yes                                                  
    foomatic-rip-hplip-install=yes                                            
    hpcups-install=yes                                                        
    cups-drv-install=no                                                       
    cups-ppd-install=yes                                                      
    internal-tag=3.9.8.36                                                     
    restricted-build=no                                                       
    ui-toolkit=qt4                                                            
    qt3=no                                                                    
    qt4=yes                                                                   
    policy-kit=no                                                             
    hpijs-only-build=no                                                       
    lite-build=no                                                             
    udev-acl-rules=no                                                         
    
    
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables. 
    
    [plugin]
    installed=0
    eula=0     
    
    
    
    Current contents of '~/.hplip/hplip.conf' file:
    error: Could not access file: ???? ????? ???? ??? ??????????
    
    --------------------------
    | DISCOVERED USB DEVICES |
    --------------------------
    
      Device URI                             Model             
      -------------------------------------  ------------------
      hp:/usb/HP_LaserJet_P1005?serial=BC0F  HP LaserJet P1005 
      0EX                                                      
    
    ---------------------------------
    | INSTALLED CUPS PRINTER QUEUES |
    ---------------------------------
    
     
    hplaserjetp1005
    ---------------
    Type: Printer  
    Device URI: hp:/usb/HP_LaserJet_P1005?serial=BC0F0EX
    PPD: /etc/cups/ppd/hplaserjetp1005.ppd              
    PPD Description: HP LaserJet p1005 hpijs, 3.9.8.36  
    Printer status: printer hplaserjetp1005 is idle.  enabled since 23.11.2009 (пн) 16,55,40 EET
    error: Required plug-in status: Not installed                                               
    Communication status: Good                                                                  
    
    
    ----------------------
    | SANE CONFIGURATION |
    ----------------------
    
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    
    Checking output of 'scanimage -L'...
     
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the    
    sane-find-scanner tool (if appropriate). Please read the documentation 
    which came with this software (README, FAQ, manpages).                 
    
    
    ---------------------
    | PYTHON EXTENSIONS |
    ---------------------
    
    Checking 'cupsext' CUPS extension...
    OK, found.                          
    
    Checking 'pcardext' Photocard extension...
    OK, found.                                
    
    Checking 'hpmudext' I/O extension...
    OK, found.                          
    
    Checking 'scanext' SANE scanning extension...
    OK, found.                                   
    
    
     
    -----------------
    | USB I/O SETUP |
    -----------------
    
    Checking for permissions of USB attached printers...
    
    HP Device 0x3d17 at 001:004: 
        Device URI: hp:/usb/HP_LaserJet_P1005?serial=BC0F0EX
        Device node: /dev/bus/usb/001/004                   
        Mode: 0664                                          
    getfacl: Removing leading '/' from absolute path names
    # file: dev/bus/usb/001/004                           
    # owner: root                                         
    # group: lp                                           
    user::rw-                                             
    group::rw-                                            
    other::r--                                            
    
    
    
    ---------------
    | USER GROUPS |
    ---------------
    
    root
    
    
    -----------
    | SUMMARY |
    -----------
    
    error: 3 errors and/or warnings.
    
    Please refer to the installation instructions at:
    http://hplip.sourceforge.net/install/index.html
    openSUSE Tumbleweed KDE4.11.x x86_64
    Linux user #543309
    http://cazadordevarna-kennel.com/suse/

  2. #2
    Join Date
    Jun 2008
    Location
    The English Lake District. UK - GMT/BST
    Posts
    36,784
    Blog Entries
    16

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    My openSUSE 13.1 KDE Box
    My Articles
    Was I any help? If yes: Click the star below

  3. #3
    Join Date
    Mar 2009
    Location
    Burgas,Bulgaria
    Posts
    80

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    I find the solution ,end it is:
    1. Click on the Application Launcher, choose "Yast: Administrator Settings", and enter the super user password when prompted.

    2. Scroll down, choose "User Management", select your user profile, and choose "Edit".

    3. Under the Details tab ensure that the "lp" group is checked, click "Accept", and click "Finish" on the next dialog box to exit.

    4. Log out, then log back in, and run hp-setup.
    5. Launch a command-line window and enter:

    hp-setup

    6. Select your connection type and click "Next".

    7. Select your printer from "Selected Devices" list and click "Next".

    8. Enter your root password when prompted and click "Next".

    9. Use the recommended installation method and click "Next".

    10. Check the box to accept with the "Driver Plug-In License Agreement" and click "Next".

    11. Finish the installation of the printer as normal, however you may be prompted to re-enter your user name and password.
    openSUSE Tumbleweed KDE4.11.x x86_64
    Linux user #543309
    http://cazadordevarna-kennel.com/suse/

  4. Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    I have same printer ,and mine trouble was that I did upgrade to 11.2 instead of clean install.After fresh install of 11.2 works ok
    Make shore that hplip and hp-ijs packages are installed.
    Run hp-toolbox (from applications),and add printer (it will ask for your root pass),during process installer will download some firmware, and that is it.
    Do not add printer thru yast! (guess reason for printer is not working that way that firmware is missing)
    Registered Linux user # 493441

  5. #5

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    Quote Originally Posted by NikolaiSS View Post
    I find the solution ,end it is:
    1. Click on the Application Launcher, choose "Yast: Administrator Settings", and enter the super user password when prompted.

    2. Scroll down, choose "User Management", select your user profile, and choose "Edit".

    3. Under the Details tab ensure that the "lp" group is checked, click "Accept", and click "Finish" on the next dialog box to exit.

    4. Log out, then log back in, and run hp-setup.
    5. Launch a command-line window and enter:

    hp-setup

    6. Select your connection type and click "Next".

    7. Select your printer from "Selected Devices" list and click "Next".

    8. Enter your root password when prompted and click "Next".

    9. Use the recommended installation method and click "Next".

    10. Check the box to accept with the "Driver Plug-In License Agreement" and click "Next".

    11. Finish the installation of the printer as normal, however you may be prompted to re-enter your user name and password.

    NikolaiSS You are a stud!!! worked for me thanks...

  6. #6

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    how can i install hp laserjet printer p1005 on my computer using opensus 11.2

  7. #7

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    can hp laserjet 1020& 1018 work on opensus 11.2?

  8. #8

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    I have a P1005 aswell and had an issue that it was detected and properly listed as a HP P1005, but wouldn't print. I fixed mine using info posted here

    Code:
    http://foo2zjs.rkkda.com/ - MainPage
    http://foo2zjs.rkkda.com/INSTALL - Install Guide

    Also when it lists

    $ ./getweb P1005 # Get HP LaserJet P1005 firmware file

    You may need to just use.
    $ ./getweb P1005



    The HP 1018 and 1020 are listed on that site aswell.

  9. #9

    Default Re: HPLaserJet P1005 and HPLIP not work in 11.2

    NikolaiSS!

    I concur! Excellent info to make this printer work!
    Last edited by ejboshinski; 02-Mar-2011 at 10:24. Reason: Add name of solution provider

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •